Don’t waste hundreds of dollars fighting a losing battle against the heat. Your air conditioner already has enough work to do. It doesn’t need to fight against the hot air trapped in the attic. You need an attic fan to give your air conditioner a hand and your wallet a break. You don’t have to suffer through another hot summer. A Beverly Hills electrician can help ease the heat of the summer in your house by installing an attic fan. If you have never heard of attic fans, give The Electric Connection a call.

Attic fans are designed to pull out the hot, stuffy air that collects between the ceiling of your home and the roof, which leaves it all trapped in the attic. The hot air is like a giant bubble that does not allow your home to ever really get comfortably cool. Not to mention, the hot air bubble is giving your air conditioner a really hard time. It will struggle to maintain your home at a cool 72 degrees and work harder than it should, which can cause a breakdown. Repairing an air conditioner can be very costly.

It makes sense to avoid the hassle and the heat by hiring an electrician. Beverly Hills homeowners can stay cool without paying a small fortune with the installation of an attic fan. An electrician will evaluate the best placement for the fan. Ideally, you will want it placed with the opening under an eave. The air in this area is cooler. The cooler air is pulled into the attic while the hot air trapped in the attic is pushed out. Depending on the size of the attic, you may need more than a single fan. If you want to learn more, give The Electric Connection a call today and schedule your appointment.

CRI) of 82 to show the true colors of objects and surroundings.

A rocker switch allows for two levels of light, but the fixture can also be dimmed with an electronic low-voltage (ELV) dimmer. Up to 10 under-cabinet fixtures can be joined in a series with our interconnect cables. The low-profile white aluminum fixture has 120V AC operation and is designed to last 30,000 hours—three times longer than equivalent fluorescent fixtures.

There was a time when buying light bulbs used to be a much easier task than it is today. Then along came LED, CFL, and light bulbs bent on reducing energy. With this, the good old incandescent started losing their place on our bulb holders. Gone are the days when finding a bulb for your home just meant looking at the wattage on the box. If a bulb was rated 100 watts, you knew it would be 25% brighter than a 75-watt one.

An entirely new rating system is now used and this has been giving shoppers grief for quite a while. At the center of this confusion is the word ‘lumens,’ which appears along its older and more familiar cousin ‘watts.’ Learning about lumens is the price you pay to help keep our planet safe. Don’t worry, though. We will tell you everything you need to know about the new lights rating system.

Lumens are units used to measure how much light a bulb puts out. Watts measure how much electrical power the bulb uses. With incandescent bulbs, the expected brightness pretty much depended on the wattage of the bulb. One lumen is equal to the amount of light given out by a birthday candle.

The idea with energy saver bulbs is to use fewer watts and produce more power. Incandescent bulbs produced by different companies are pretty uniform. On the other hand, energy saver bulbs are so varied, you don’t know if two 50 watt bulbs will be equally bright. This is why CFL and LED bulbs have lumen figures printed on them while incandescent varieties only have wattage.

When you hear “lumen per watt”, think miles per gallon. This is a measure of efficiency. It measures how many lumens of electricity a bulb can produce when using up one watt of electricity. This is the factor that should interest you the most when you are buying light bulbs. The first step is to figure out the brightness you want in lumens. If you want a brighter room, go for a bulb with more lumens. To dim it down, consider a bulb with a smaller lumen rating. Also, find the lumens per watt rating to determine which bulb has the greatest efficiency. Usually, the lumens per watt rating is an average, as bulbs reduce in efficiency with time. The lumen per watt rating is calculated by dividing the brightness in lumens a bulb offers by the number of watts it takes to produce.

Watts can be converted into lumens by multiplying the lumens per watt rating by the brightness.

The Federal Trade Commission now requires a product information summary, called the Lighting Facts label, to be attached to every lighting product. Another label that you should be on the lookout for is the Energy Star mark. The system was created by the Environmental Protection Authority in 1992 to govern the energy consumption of various household and industrial appliances. When it comes to lighting, this mark is put on bulbs that have met a certain lumen per watts threshold. This mark effectively spells impending doom for incandescent bulbs because they do not come anywhere near fulfilling these new efficiency ratings. If you are not into reading the fine prints and making calculations, the Energy Star logo will make your life easier. Look for the label on light bulbs to ensure you are getting a good deal.

The chart below can help to understand the Energy Star system.

This chart is an excellent indicator of how incandescents measure up to energy savers.

Aside from the fact that you have one more bullet in your trivia arsenal, your hunt for light bulbs should now return to the simple task it should be.