Rewiring an old house can seem like a big challenge. Older homes often need comprehensive rewiring especially when their existing wiring no longer meets building codes. Yet, no matter if a home is 50 years old or 150, it’s important to work closely with a licensed electrician throughout this process. A small mistake or a forgotten area of the home could lead to costly mistakes later.

Older homes can be full of electrical hazards. Many times, the need to rewire comes from two areas. First, you need to be sure the home is safe and electrical systems are working as they should. Second, you need to upgrade the home’s existing electrical system to meet modern needs and electrical capacity requirements. That’s not always easy to do.

To upgrade old house wiring, there are several key considerations. This is where you need to start with the help of a licensed electrician. Here’s the process:

Whether you know it or not, copper wires are the most commonly used type of wires in our home electrical systems. Why is it that your electrician in Glendale and any electrical utility company values the use of this type of wiring over all of the other technologies available? The simplest answer is that copper wiring is just the best solution for the job. Copper wiring is extremely ductile and malleable. Furthermore, it has superior heat and electrical conductivity. Because of these properties combined with the fact that it is robust and rustproof, copper wiring is a nearly perfect material for any electrical wiring. The properties outlined above allow copper wiring to carry our electrical currents over distances that are much longer than wires made up of other materials.

By far, the most desired property of copper wiring is its incredible conductivity. When compared with other non-precious metals, copper comes out on top in regards to conductivity every time. Because of its robustness, it can also carry a larger amount of electricity for the particular diameter of that wire. What this means for an electrician as that copper wiring will experience less loss as the electricity moves through it. To further add to its case, copper wiring has the chemical makeup that make it highly resistant to the harsh environments that many wires must stand up to. It can withstand many different elements, is corrosion resistant and will not rust. For this reason, it is highly prized as an ideal electrical conductor.

Chances are, the walls in your home are filled with copper wires of all different shapes and sizes. Your Glendale electrician took great care to plan out and install a system that was ideal for the needs of your home. Because copper wiring was used, you can be assured that they will last for many years to come, all the while providing you with a high quality electrical current.

If your home has aluminum wiring or any other wiring materials in it, please don’t hesitate to contact The Electric Connection. You can read more about electrical wiring at our company website at www.theelectricconnection.com.

If you want to achieve flexibility of loading different electrical appliances in your home, implement the following approaches. The electrical conduits practices recommended here meet NEC guidelines guaranteeing proper load growth for both commercial and residential buildings.

If you expect the load on your house, office, establishments, or other buildings to increase in future, consider using at least 12 AWG conductors. Ensure that they have protection of 20-amp circuit breakers and are designed with a 15-amp load standard each.

In addition, consider implementing these measures on wires and cables to increase the optimal performance of your circuit conductors.

To allow the normal length of lamp cords and other wire cables, the NEC Code recommends more than six feet of distance between the point on a wall and an appliance receptacle. In applications such as kitchen countertops, electricians should wire receptacle outlets some twelve feet or four feet apart.

The biggest challenge here is the difficulty in predicting how items such as furniture in your house will be arranged. Additionally, there may be an inadequate number of outlets at various locations. Evidence for this can be seen in the outlet power strips that today’s equipment use.

In locations where you can expect a huge load, such as computer workstations, offices, and home entertainment, the use of Quadruplex receptacles is an ideal solution. Reducing the number of receptacles that a single circuit uses will limit the installation and use of sensitive equipment. It also positively affects circuit conductors, voltage drop, chance of interaction, and reduces the likelihood of harmonics accumulating to harmful levels.

If your home has a large kitchen and multiple bathrooms, you need additional circuits that go beyond the minimums of the NEC Code. This effectively maintains the high-capacity appliances that characterize these rooms.

In addition, limit the number of use receptacles per circuit. For example, a 15-amp circuit can run 1800 Volt Amps when working at 100 per cent rate. While NEC recommends using circuits at 80 per cent rate, this translates to 1440 Volt Amps.

For some reasons, NEC requires a high number of circuits for use in most commercial and residential buildings. The Code recommends that sensitive electrical appliances, high-capacity loads, and equipment that cause poor quality of power obtain power from individual circuits. This separation eliminates the interference with equipment on a common circuit.

Where individual branch circuits are installed, the harmonicas generated in other circuits are shielded from coming in contact with sensitive equipment. In addition, this prevents the high neutral currents from sensitive electronic appliances to those circuits, effectively eliminating the likelihood of incorrect operation and voltage drop.

Raceways provide the ease of upgrading conductors efficiently and give electricians the freedom to pull conductors through a building. Therefore, let spare raceways and safety electrical material is installed during construction to allow an easy installation of conductors in the future.

As appliances and equipment advance over time, the lighting and switching mechanisms in your house or building should anticipate future modifications. For example, motion detectors and other electronic lighting devices require a small standby current to remain in their optimal state.

Therefore, install the following solutions for safety switches and lighting appliances right from building construction.

These applications are necessary if you want to reduce the load on the circuits in your house. If you have not implemented them yet, call a reputable electrician today to overhaul the electrical conduits. While this protects the electrical wiring from possible hazards, it also safeguards the assets in your house or building.

One of the easiest ways to increase your home’s security and beauty is to install outdoor lighting. By combining beautiful outdoor lights with your home’s landscaping, you can increase the value of your home while creating a gorgeous outdoor area that you can enjoy at any time of the day. But what outdoor lights are the best? Let the electrical experts at Kolb Electric help.

Like everything, it depends on what you’re looking for with your outdoor lighting. Do you want security for your home, or landscaping? These questions will point you toward not only what style lights you need, but how bright your lights should be.

When you choose to use outdoor lighting for security, you can go in two different directions. You can either:

If you’re choosing to install outdoor lighting for landscaping purposes, it’s important to keep these few things in mind:

Kolb Electric offers outdoor lighting that will increase your home’s:

Beauty – landscape lighting can be used to showcase interesting features in your home’s architecture or your yard! At Kolb Electric, we can design and install outdoor lighting that will illuminate and call attention to your landscape at night. Landscape lighting is a fully customizable way to improve the look of your house after the sun goes down, particularly if you enjoy entertaining or you want to improve your home’s curb appeal.

Security – dark spots in and around your yard can be dangerous, particularly if they are around entry points into your home. With low-voltage landscape lighting, you can shine a light on potential problem areas in your home and deter intruders late at night!

Safety – in addition to keeping your home safe from intruders, low-voltage outdoor lighting can make walking around your yard safer. It can be used to light up stairways, paths, etc. to prevent tripping and injuries.