By Clarissa Allison | December 2nd, 2016

When it comes to choosing which manufacturers to represent, several things are taken into consideration. Longevity, reputation, variety of selection, and response time are all paramount. This week LouieLighting.com would like to introduce a manufacturing partner we are proud to showcase: RAB Lighting.

RAB Lighting has been a leading manufacturer of sustainable indoor and outdoor lighting fixtures since 1946. Their reputation is grounded in the finest manufacturing, supported by a growing infrastructure complete with sophisticated facilities and engineering capabilities. Known for its cutting edge product design, quality, and customer support, the company operates the 6 acre corporate headquarters and manufacturing facilities in Northvale, New Jersey as well as locations in China, Taiwan and Malaysia, from where RAB is serving a constantly growing lighting market.

In 2002, RAB Lighting provided the Vaporproof fixtures which formed the Olympic Rings – this project resulted in the largest sign in history. What a feat! Accomplishments such as these demonstrate the pride and craftsmanship central to the brand.

Are you having power go out intermittently? Are some lights and receptacles working in some rooms while others are not? Are some outlets going out randomly, then coming back on again?

You may have a problem with corrosion at the meter main distribution panel outside.

Our salty air combined with humidity causes the aluminum wire connections at the panels to collect salt crystals and break down the conductive wires and termination points, causing weak conductivity or a break altogether. This could be a fire hazard. There could be a hot spot from an electrical arc or exposed live wires, not just the lights going out.

Solution? After determining that indeed the problem is the above with a diagnostic check; first, we need to call the utility company and have an on-call service man to come out and turn off the power coming in from the pole. Next, one of our licensed electricians will be there to clean off the metal parts inside the meter panel box. He will scrub the corroded aluminum electrical metal parts with a wire brush, cover the metal with a special spray to inhibit future corrosion, and then apply an antioxidant material to the jaws of the meter clips and wire screw down points. Finally, tighten everything up and have the utility man plug the meter back in.

Now that should do it.

Tube lights are found in many applications and environments such as office buildings, hallways, garages, and really anywhere that has a low and flat ceiling. Although fluorescent tubes contain small amounts of mercury and isn’t a whole lot, you still want to avoid the breaking of a fluorescent tube and any exposure to mercury if possible.

Whether you are simply replacing a burnt out fluorescent tube with a new one or are switching over to a new technology (such as LED), there is a proper way to do it. By following these steps along with others that you may find, you will allow yourself to reduce risk of harm for yourself, staff, or whoever is the one physically replacing the tube lights.

Let’s answer some common questions and issues that people seem to face when tasked with this issue of replacing mercury filled fluorescent tubes…

By recycling rather than simply throwing away your tube lights, you opt-in for the environmentally friendly route of switching out old tubes. If you choose not to recycle, you are allowing toxic mercury to freely enter the environment, which of course is not good.

Not only do you prevent mercury from freely entering the environment by recycling, but you also reduce waste. How exactly? Part of the tube is reused for new tubes that will be resold and used. This allows for less waste and this goes back to the saying “Reduce, Reused, Recycle.” So by taking part of fluorescent tube recycling, you allow the process of recycling to continue and prevent waste from entering the landfill!

When taking your tubes out to bring for recycling, this is probably the most difficult step you need to be most cautious with. The best option you have is to be prepared and know what to do if things go “south” as they like to say.

Here is what you can do to prepare for the removal of fluorescent fixtures:

And for one thing that you should always remember for dealing with a broken tube is this: NEVER VACUUM. By vacuuming, you make glass particles go airborne and that is a highly dangerous situation to be in.

For more tips on how to clean up a broken fluorescent or CFL lights, using this tool from Earth911. It allows you to search what you need to recycle and where you are located. So you go to that tool, type in ‘fluorescent’ or ‘CFL’ along with your location and you will surely come across the closest place to recycle fluorescent tubes (along with really anything else you may want to recycle).

If you are in the process of disposing and recycling your fluorescent tubes, what is going in there to replace the ones you are removing? If the answer is “more fluorescent tubes,” may we ask why?

The traditional lighting style–while tasteful and low-key–provides just the right touch when you want to draw the eye to a design focal point without overpowering it. Few lighting styles work as unobtrusively as transitional chandeliers while managing to showcase an advanced stylishness for discerning design aficionados. You can choose from Capitol’s vast selection of lighting features that include:

• Multiple glass shade shapes

• Brass, crystal and metal finishes to complement existing or planned furnishings

• Finishes that include bronze tones, gold accents, brushed nickel, polished nickel, clear and crystal

• Fixture styles that include pendant lights, chandeliers, mini chandeliers, island lights, flush-mounted lights, recessed lighting and track and rail lighting

• Bulb types that include incandescent, fluorescent, halogen and LED technologies

• Energy Star lighting efficiency

• Title 24 compliant

• Dimmable fixtures