Our hope is for Light Reading to be a place you can come for inspiration and guidance as you plan your next lighting project.

The thing is, we are incredibly inspired by our readers!  Your kind words, and contributions to “11 Beautiful Photos of Under Cabinet Lighting”

11 Beautiful Photos of Under Cabinet Lighting: This one definitely falls under the “inspiration” category, but it can also be helpful if you’re trying to determine what type of under cabinet lighting is your favorite for the kitchen. Puck? Linear? LED? Fluorescent? Be prepared to gaze at dreamy kitchens. “How To Have Great Lighting In a Rental”

Here’s How To Map Out Your Recessed Lights (An Infographic): Those who decide to add recessed lighting to a new or existing home are presented with a seemingly impossible task – laying them out on a blueprint. This infographic will clue you in on what every lighting designer knows about recessed lighting placement. You’ll be ready to install in no time. Read More >>

Tripped circuit breaker: many of us have experienced them at some point in our homes, yet instead of asking ourselves, “Why Do Breakers Trip?”, we reset the breaker without much thought. Before flipping the switch back over to the “ON” position, however, it’s important to understand why the breaker tripped in the first place, and what can be done to keep it from happening again.

As a Top Dallas Electrician, ElectricMan Inc. understands the danger of ignoring the warning signs of a tripped circuit breaker. But first, you need to know what a breaker does and how it works.

The Job of the Circuit Breaker

Simply put, a home or business circuit breaker is a safety device that monitors the amount of electrical current going through the electrical wires in your home and shuts off the circuit if too much electricity is being pulled through it, or if there is any disturbance in the current that could result in a fire.

Whereas a fuse performs the same task but can only be used once, a circuit breaker can perform over and over with the use of a switch that trips to indicate when it has effectively cut off current to a particular area.

What Makes a Breaker Trip?

So, Why Do Breakers Trip and what kind of things could cause a circuit breaker to trip? Some of the most common causes of a tripped breaker include:

For example, in some homes, running a microwave, a toaster oven and a refrigerator all on the same circuit may cause your wires to overheat, tripping the breaker. In this instance, making the load a little lighter, or splitting the circuit, may do the trick in keeping it from tripping the breaker.

Ignoring a Tripped Breaker is Not a Good Idea

Because of the many reasons why your circuit breaker could be tripping, and because of the purpose of the circuit breaker, you should never take a tripped breaker lightly. It’s important to understand that the circuit breaker is a safety device; simply switching the circuit back on without investigating the culprit can become costly in the long run and, in many cases, extremely dangerous.

If your breaker trips consistently, chances are there is a potentially dangerous electrical issue that needs to be looked at. ElectricMan Inc. is a Top Dallas Electrician with over 27 years of residential and commercial experience in the electrical field. Call ElectricMan Inc. at 972-792-7270 to make sure that your home is safe and free from the risk of a short or a fire.

A safety switch is essentially a device that very quickly switches-off the electricity in case any electrical fault is detected. In effect, it reduces the risk of injury & death caused by contact with electricity. Current day safety switches are very different from the ones used even up until a decade ago. Today, it’s mandatory to have these installed in buildings where any kind of electrical addition or upgrade has taken place.

Apart from this, safety switches are also needed for power outlets that that supply electricity to mobile homes like caravans etc. It’s not mandatory to have these safety switches in older homes; however, the recommendation is that you should consider getting them installed. It is one of the most effective ways to protect your family & yourself from electric shock.

ELCBs or Earth-leakage circuit breakers are safety devices used to prevent shock in electrical fixtures which have high Earth impedance. The current installations use the circuit breakers that directly detect leakage in current. Here are some features of an ELCB:

RCDs or RCCBs are essentially modern electrical wiring devices which quickly disconnect a circuit if they detect that there is an imbalance in the current between the energized conductor/s & the return conductor. They are designed to immediately switch-off the electricity supply when the electricity leaking to earth is detected to be at harmful levels. These devices offer very high levels of protection from electric shock.

Voltage Earth-leakage circuit breakers were first introduced around 60 years ago, while the current ELCBs were launched only around 40 years ago. For a very long time, voltage-operated ELCBs & differential current-operated ELCBs were both called ELCBs; this was because it was a far easier term to remember. However, as expected, this common name caused a significant amount of confusion within the electrical industry.

If someone accidently used the wrong one in a particular application, the installations may not get the kind of protection it needed. It was to eliminate this confusion that the International Electrotechnical Commission decided that the differential current-operated ELCBs will be termed as RCD (residual current devices). Any current that’s over & above the load current is referred to as the residual current.

ELCBs have a number of disadvantages such as:

Today the RCD is preferred means of providing effective shock protection. The term is also most widely used across the globe.

For more information about RCDs and the best electrical solutions, call Allround Electrical at 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263

Security lighting is a great way to protect your home from intruders at night—but only when it’s working properly! Malfunctioning security lights may stay on longer than they’re supposed to, not turn on when they should turn on, or face a number of other problems that prevent them from working effectively. The following is a guide to troubleshooting security lights for some of the most common issues people face. Here’s what to do if you have the same problems!

Motion sensor lights are designed to come on when they detect movement and shut off after a few minutes when everything stops. But sometimes, motion stops and the lights stay on—usually as a result of a spike in current.

The first step in troubleshooting security lights with motion sensors that won’t shut off is to check if the time interval has been changed. Most motion sensors allow you to set a length of time for the light to stay on, usually anywhere between 30 seconds to 10 minutes. If the interval has been changed and the lights are staying on for too long, change it back to the time you want.

If that doesn’t work, go outside during the day and see if there’s anything in range of the motion detector that might be constantly moving, like a flag or even an animal nest (you might even look outside at night and see if you can see anything). If you don’t see anything, try shutting the lights off at the breaker, then restarting them.

Lights that won’t shut off are bad enough, but what about lights that won’t turn on? One common reason this happens is that artificial light is coming in from another source and is mimicking daylight, preventing the sensor from activating properly. Try to find where the light is coming from, and cover or change the direction of the sensor to avoid the light.

The underlying issue behind constantly flickering lights may vary depending on a number of factors, including whether the problem is only occurring with a single bulb or more than one at a time. If it’s only a single bulb, carefully check it to see if it’s secure in its fitting. If it is, try replacing it with a new bulb. If that doesn’t work, call an electrician for a security light repair.

This one isn’t as common as the others on our list, but in the past we’ve had customers whose security lights have been faulty when the weather was damp, rainy, or snowy. This is usually the result of low quality motion sensors, which can be temperamental in very hot or very cold weather. The certified, DC-area electricians at Kolb Electric recommend spending a little more upfront to get a quality product that you’ll be able to rely on for years with little need for security light repair.

Oil and natural gas resources are highly in-demand for the fuel and energy sectors, and this demand will continue to grow. Companies working in these sectors are often hard-pressed to put effective electrical systems in place that can handle the energy requirements without compromising on safety and reliability.

The good news is that modern electrical solutions are designed to handle the pressures and demands of processes in every aspect of the oil and gas industry. Today’s electrical infrastructure combines safe and reliable power supply with state-of-the-art information management systems customized to suit various requirements.

Let’s take a look at some of the electrical equipment available for oil and gas industry applications:

These can easily be considered some of the most essential products for the oil and gas sector, since they offer improved safety and security for employees as well as production units. Efficient warning systems can reduce the risk of casualties and save lives in case of untoward incidents.