There’s certainly a lot to be enjoyed about a Florida winter season. The mild weather, the festivities—it’s all quite nice. But just because the season brings some advantages doesn’t mean you have nothing to be concerned about regarding your home’s electrical! There are some challenges unique to this time of the year, and at Hoffman Electrical, our team is dedicated to ensuring you’re completely prepared.

When a fire breaks-out, most people just assume that it’s been caused by some inflammable substance. While that might be the case, it’s important to keep in mind that fires can also be caused by electricity. The one thing to keep in mind is that an electrical fire can’t be doused by water. Faulty or old electrical installations can lead to a fire and cause untold damage to life and property.

There are times when the electrical equipment or appliances in an electrical system can be the cause of overheating & overload, which can end up causing a fire. So, exactly what is it that causes an electrical fire? There are three main reasons, let’s take a detailed look at what these are and what can be done to prevent this from occurring:

Some properties have wiring that is decades old and electrical wires do tend to deteriorate with age. In fact, if the wiring in your house is over 15 years old, the recommendation is that you should get the entire property rewired. Older wiring wasn’t designed to bear the electricity load that current-day appliances demand. At times the electrical contractor might have cut corners and installed wiring of poor quality and this can lead to a similar problem, both of which can result in fires.

Arcing is quite a common problem with electrical wiring. As mentioned earlier, most homes have a range of heavy-duty electrical appliances. When you run a number of these appliances simultaneously in your home, it results in overloading and overheating of the wires. If the wiring is old, it will get heated up which will cause the insulation around it to melt – this results in arcing and an electrical fire may erupt too.

There are times when electrical wires are just too close to an external heat source which causes the outer insulating sheath of the wiring to melt. If this goes unnoticed, it can result in an arcing and fire.

Regardless of what has caused the electrical fire, if you attempt to contain it by pouring water on it that will escalate the issue. Water doesn’t have any effect on electrical fires; in fact, if you try to use water to douse an electrical fire, you can get electrocuted. What you need to deal with an electrical fire is a Class C fire extinguisher.

This type of extinguisher has dry chemicals that help contain the fire. Depending on how severe the fire is, it might be possible to completely bring it under control using a Class C fire extinguisher. If you don’t have this extinguisher, baking soda might help to some extent.

In case there is a break-out of fire on your property, the first thing you should do is switch off the power-mains; this is effective in containing the fire. Ideally every home and commercial establishment should have a Class C fire extinguisher or two, based on the size of the property and that should be used in case of any fire in the electrical wiring. An electrical fire is an electrical emergency and it’s crucial that you keep the number of a local, reliable electrician handy.

Never try to fix any electrical issues on your own. That can only lead to more complications and will compromise the safety of your property. We at Allround Electrical can rectify all types of electrical faults and we provide a range of electrical services. For more information, contact our friendly team today at this number – 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263

The Seattle Mariners may have just upped their game when they retrofitted their clubhouse with an LED lighting strategy focused on intensifying the moods, energy levels and performance of their players.

In an article published in Architectural SSL, Stan Walerczyk highlights five core areas of our life where lighting effects human physiology and performance:

Circadian Rhythms — a case study by Ephesus Lighting, when the University of Phoenix replaced their metal halide fixtures with LEDs, they experienced a 75% reduction in energy consumption, a statistic that probably took the sting out of the initial investment. The long-term benefits of LED lighting (less maintenance, a reduced carbon footprint) offer less in the form of immediate gratification, but trickle their gifts throughout future generations.

There are instances where NEC and other regulators recommend dedicated circuits for certain loads. Typical loads to put on individual branch circuits include sensitive electronic equipment such as computers. In addition, water heating systems, large appliances, and other high capacity loads that zap power require a dedicated circuit.

Run cables all the way to the main service panel and avoid connecting to other existing circuits. The same conductor size should be used throughout the branch circuit.

Electric water heaters, HVAC equipment, hot tubs and other appliances should each have a nearby disconnect that is easily visible and accessible. The power disconnect can be provided by the main or sub panel breaker, a dedicated switch, or a power cord that can be unplugged.

The branch circuits should have adequate current carrying capacity, adequate and grounding.

Typical branch currents include:

If your old electrical panel is no longer functioning properly, it can be endangering your home and everything inside it. Read on for the various warning signs you should be looking out for.

Even an old electrical panel is an improvement over fuse boxes (these can no longer keep up with the energy demands of today’s households), but if it’s getting to be a bit too old, you may need to look into replacing it. The panel is responsible for taking power from the main line outside and directing it through your electrical system.

The electrical panel also disconnects circuits when there is too much current flowing through — this is what protects you from hazards like electrical fires and damaged appliances. If you’re not sure you need to replace your existing setup, we’ve put together some of the warning signs that will indicate whether or not it’s time to move on to a new panel: