We all know or at least heard that converting from Metal Halide (High Intensity Discharge) to LED will save you money.

But how much? Are there any other reasons or difference you should know about?

In this article, we break down all the factors that you should be aware of before making a decision to convert from Metal Halide to LED. Here are the 9 reasons we think LED wins over Metal Halide.

Let’s take a look at the information on a typical 400 watt metal halide bulb. While specifications may vary, a visit to a popular online website that sells Metal Halide bulbs shows that a brand new bulb has the following specifications:

We have just as many customers wanting to convert to LED because of maintenance savings as they do for energy savings. Think about what we discussed, over the life of the LED retrofit kit, a customer would have to do 5-6 Metal Halide replacements. The higher the installation height, the higher the cost of replacement. And if you have a facility loaded with lights, this becomes a significant budget amount every year that you must take into consideration. Now, we know that reduced maintenance time on lights does not translate into dollars saved because it is highly unlikely that people will lose their jobs over the fact there is much less work to do. However, these people will have time to now work on things that matter, like fixing the machines that make the company money instead on replacing lights that cost the company money.

When you take a measurement of light with a light meter, it reads lumens. And this measurement of all the lights that contribute to the light at that location creates a measurement called foot candles. But let’s think about that light that is being measured. Metal Halide creates all sorts of light, in all spectrum’s, visible or otherwise. This includes UV and IR spectrum’s, visible to the measuring device but not visible to the human eye. LED, on the other hand, does not produce UV and IR. Therefore, its readings using the same light meter is only picking up visible spectrum’s.

So there is a fun little test you can do. Have 2 light sources, LED and Metal Halide. And first ask, which one is brighter? And if the right LED source was selected, they should say LED. And then use a light meter, and the light meter may say the Metal Halide area is producing more foot candles. And so now you know part of the reason, but wait, there’s 2 other pieces of information you need to know.

Click here to see our infographic on Retrofitting vs Replacing.

Conclusion

With the unseasonably cool temperatures gripping the entire country right now, you are probably considering the purchase of a space heater to help ward off the chill. There are several different kinds of heaters on the market today. As you can imagine, some are better than others. An electrician in Los Angeles is here to explain the most common types of space heaters available. You can call The Electric Connection for more information.

Oil-filled radiators are one of the safer types of space heaters. Oil is heated and rotated through the radiator releasing heat into the room. They are silent due to the lack of a fan. They can heat a small room. Fortunately, they do not get overly hot and will not cause scalding burns if you happen to touch them. However, they produce enough heat that you will want to follow the standard guidelines of keeping the heater at least 3 feet away from walls or furniture.

Ceramic-element heaters are rather small, but produce a great deal of heat. They are typically safer than their counterpart, the coil-based convection heaters. Different fan settings will help control the amount of heat produced. One of these heaters could heat a small room or used at a desk.

Infrared space heaters are new to the market and do cost more, but they are much more energy efficient. They can heat a large room and in some cases an entire home if it is relatively small and well-insulated.

As far as the cost to your Los Angeles electrical bill, space heaters are not as bad as many assume. It will depend on the type of heater you use and how many kilowatts the heater uses. If you are looking to make a long-term investment, the infrared heaters are a good option and will ultimately save you money in the long run with a lower heating bill. If you have more questions about space heaters, give The Electric Connection a call today.

If you are renovating or updating your kitchen, one common kitchen addition you might be interested is a garbage disposal unit. This little unit sits in your sink and allows you to shred food that you would not normally fit down the drain. This can be a handy appliance, however it may introduce the threat of electrocution into the environment, as water and electricity don’t mix well. If you are looking at having a garbage disposal unit installed in your sink, have one installed safely.

The garbage disposal unit is installed into your existing sink pipe. In order to power the unit, you will require a 120-volt GCFI (ground-fault circuit interrupter). This means that you will need an outlet under your sink to plugin into. If one is not available you will need to have it installed. Often, other appliances may already heavily load kitchen circuits, it is important to check the load on that circuit before installing a new electrical outlet. If you are not careful, every time you run your garbage disposal you could cause the breaker to trip and lose power to your toaster, microwave, or refrigerator.

At times disposal units may need maintenance, become clogged, or break down for some other reason. To identify the problem you may need to open up the sink or motor to get to the part that you need access to. Before you begin any work, shut down the circuit that the garbage disposal is on and unplug the unit. This will not only keep your fingers safe from the motor activating unexpectedly, but it will also help you avoid an electrical related accident. If you start to take apart the pipes and water begins leaking there is a big risk of electrical shock. If you are not familiar with the plumbing or electrical work of the garbage disposal, leave it to a professional. You may think it is a simple job, but one mistake can be costly.

Before having a new garbage disposal installed, inspect your sink and pipes for any leaks. If these leaks make contact with exposed electrical wires or outlets there is risk of electrical shock. If you are not familiar with the plumbing or electrical work involved in installing a garbage disposal unit, call an expert. Our licenced electricians can ensure that your kitchen circuit can handle the unit and install a new electrical outlet.