Locate handyman electrician - Home Technician Forums - For this type of installation, you’ll need a G-LUX LED landscape light. You can also wire your G-LUX LED landscape light directly to your power supply. Connect the female end of the pigtail power cable to your LED light, and connect the pigtail wires to the main line that runs to your other lights and existing power supply. Free contractor estimates - underground wiring installation, surge protection inspection, ceiling fans troubleshooting, electrical panel etc ..More
- Commercial Electric Lighting Pharr, TX
- Light Installation Surprise, AZ
Easy-to-Install LED Landscape Lighting
With the right lights and accessories, LED landscape lighting is a breeze to install. Our plug-and-play different brand of lights in a G-LUX system. There are installation options and accessories for LED pond lights/fountain lights, spotlights, path lights, hardscape lights, well lights, and more. Check out the photos below for some landscape lighting ideas and layout options. With easy-to-use G-LUX accessories, such as extension cables, splitters, power supplies, dusk-to-dawn sensors, and waterproof junction boxes, any setup is possible.
Installation Accessories:
Waterproof Junction Box
You can use extension cables to lengthen the reach of or increase the number of lights in your LED landscape lighting system. Splitters are available in 3-way and 5-way options, and extension cables come in 6.56-foot, 16.4-foot, and 32.81-foot lengths. Use any combination of these plug-and-play accessories to add LED landscape lights where you need them. Make sure that the power supply you choose can handle the combined wattage of all your LED lights.
For this type of installation, you’ll need a G-LUX LED landscape light. Connect the female end of the pigtail power cable to your LED light, and connect the pigtail wires to the main line that runs to your other lights and existing power supply. You can also wire your G-LUX LED landscape light directly to your power supply.
You can create a G-LUX landscape lighting system using G-LUX LED lights and G-LUX dusk-to-dawn sensor will turn your landscape lights on at dusk and off at dawn. A sensor with an automatic timer is also available to keep landscape lights on for two, four, or six hours after dusk. The sensor must be plugged into your G-LUX power supply, and anything that you want it to control must be plugged into it. If you want the sensor to control multiple lights, plug your splitter or extension cable that is plugged into the splitter into it.
If you’re using waterproof G-LUX LED well lights or spotlights in ponds or fountains, there are a couple waterproof accessories that you might need. Use a G-LUX waterproof wire connector to do so.
For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.