When you are getting any electrical work done in your home, you want to make sure that the job gets done in the best possible way and that the best materials and workmanship are used in the work too. This is exactly why you conduct a certain amount of research online and try to zero-in on a credible and well-established company. However, this can sometimes be easier said than done and you may scour several sites and still not be sure which company you should contact for the work you need done.

We understand exactly how difficult this decision can be and so we have put together this list of things you should consider while choosing a residential electrician:

This isn’t very difficult to decipher. In Australia, when it comes to electrical jobs, the only things you are legally permitted to do are to change your light bulbs & operate the electrical appliances in your home, for what they were designed for. If you need any other electrical work done, beyond that; you would have to hire the services of a licensed and certified electrical contractor. This includes even the small things such as:

Even when you feel that certain jobs are very basic and that you will be able to tackle them yourself, keep in mind that electrical jobs are very risky and dangerous; and a single wrong step can cause an electrical fire and pose a risk to life and property. This is exactly why it’s important to hire the services of a credible electrical company.

They will work safely, use the latest and most advanced testing and work tools and ensure the work is done safely and in line with the applicable legislation in the state. In addition, the work has to be done as per the Australian Standard Wiring Rules. The electrician is also required to provide a certificate of compliance for the work they have handled for you.

In the current day, every state and territory requires that electricians should hold a valid electrical license to carry out any work. Most of the states also require that the electricians be R.E.C’s (Registered Electrical Contractors), before they are permitted to handle any electrical work or run an electrical contracting business.

For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of CBUS installations. The number to call is – 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263

Many people enjoy doing their own work on their homes.  If they have the skills and tools, the DIY project can be very rewarding.  It’s a great way to save money and feels good to have done it yourself.  Some may think electrical work can be done just as easy as other home improvement projects. However, you should think twice when working on items electrical related.  The hazards can be lethal and catastrophic.

Some risks include:

Many people desire to save money and have the satisfaction of  “doing it yourself”, but doing DYI electrical can cost you more in the long run.   Even what may look simple can be done incorrectly if you don’t know exactly what you are doing.  What looks to be an easy do it yourself project can turn into a nightmare due to inexperience.

Have questions about your next project?  Need advice about the electrical problem you are thinking of doing  yourself?  Give us a call:

Aluminum LED profile housings allow you to create customized light fixtures with LED strip lights. Our Klus brand LED channels are available in many different styles, including recessed-, or flexible, O-shaped, and more. Available in 1- and 2-meter lengths, the channels can be easily cut for any application from under-cabinet lighting and bookshelf lighting to showcase lighting and transition strip lighting. They’re available with a variety of lens options, such as clear, frosted, and etched that complete the profiles. We’ve put together a step-by-step guide for using these channels to create your own light fixtures. Please note that your specific channel might vary from the one used in this tutorial.

Materials needed:

1. With a pair of clippers, carefully clip through the clear plastic heat shrink as shown in figures A-C. You will want to take your time and be careful not to cut the strip’s wires while removing it.

2. Lay the LED strip into the channel, and position it along the bottom so that the ends of the strip and the channel are lined up (fig. A). Now, remove the paper from the strip’s adhesive backing (fig. B), and adhere the strip to the LED channel—starting at the lined end and working your way to the other end of the strip. Be sure to leave roughly 1/4-inch free at the end of the channel so that you can install the end cap as shown in figure C.

3. If one of your end caps doesn’t come with a pre-drilled hole, you will need to drill your own to allow the wires of the LED strip light to come through. In this case, we used a Dremel tool, but other options are viable as well. Regardless of the tool you choose, it is helpful to mark the end cap where you would like the wires to come through. Start the hole small, and increase the size as necessary.

4. Place the end cap on the wired side of the strip by threading the wires through the end cap as shown in figure A. Insert the end cap into the end of the light bar, and push firmly until it is fully in place (fig. B).

5. On the open end of the bar, slightly peel up the end of the LED strip (fig. A); this is necessary to install the end cap. Now measure your channel lens, and trim off the excess with clippers (fig. B). Be careful when trimming to avoid cracking the plastic. Excess material can be lightly sanded off. Once the lens has been cut to the proper length, slide it into the channel, and install the end cap as shown in figures C and D.

6. That’s it! Your customized LED light fixture is complete and ready for installation, which we will cover in the next step.

7. Mounting this LED profile is as easy as applying double-sided tape to the back of it and sticking it to your intended surface. Be sure to cut the tape to fit the back of the LED profile and to leave the tape backing on the side not attached to the channel until you are ready to mount it.

For most LED profiles, mounting clips are available for a more permanent installation.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.