On average, over 350,000 home fires take place every year, claiming thousands of lives. How are your smoke detectors functioning? Don't make these mistakes with your smoke detectors:

Make sure your smoke detectors are installed correctly The U.S. Fire Administration recommends installing alarms both inside and outside sleeping areas. At a minimum, alarms should be located on all levels of your home, at least one near each sleeping area and preferably additional detectors in pathways between sleeping areas and exits out of your home. If you sleep with your bedroom door closed, smoke or use heat-producing appliances in or near your bedroom, or have noisy appliances in your bedroom that could block the sound of a smoke detector (TVs, stereos, air conditioners, and more), it is especially important to install one inside each bedroom. Always use a licensed electrician when installing hardwired smoke alarms. Alarms should be installed:

Smoke detectors save lives. Don’t fall victim to these common smoke detector problems or behind today’s recommended standards for protection. Contact Mr. Electric® today to ensure the proper installation and operation of these life-saving safety devices in your home.

By Lindsay Mirick

When lightning strikes and thunder rolls, will you be prepared for the power surges that follow? When you think about storm proofing your home, power surge protection may not be the first thing that comes to mind. However, getting caught in a power surge during a storm without protection could leave you with some very expensive, very useless electronics. Mr. Electric has reasons why...

Many homeowners have the idea that surge protection is simply a matter of plugging their devices into a low-cost, multi-outlet surge suppressor. However, we all know that the cheapest option isn’t always the best option, and making exceptions can lead to more expensive consequences in the long run.

If you think about it, adding surge protection to your home costs very little in comparison to the replacement of your electronics. A single surge can follow any wire into a house and threaten televisions, computers, appliances, satellite systems, phone and cable lines, and any other electrical devices you can think of.

The cost of replacing a single large home appliance such as a washer or dryer will likely cost you double the investment of a whole house surge protector. According to the Insurance Information Institute, insurers paid over $673 million in lightning claims in 2013 alone. In the three years prior, approximately $1 billion was paid annually to policyholders.

Most people associate power surges with lighting strikes. However, many things both outside and inside the home can cause them. Outside the home, events such as power outages and power transitions in large equipment on the same power line can introduce damaging power surges on your electric lines. Inside the home reengaging trip circuit breakers or switching of pool pumps, AC units, and other devices with large motors can also introduce power surges onto your electric wiring. To effectively protect your home from these damaging surges, you need to implement whole house surge protection .

Ask yourself if can you afford to live without surge protection. A few hundred dollars isn’t much when you compare it to the cost of replacing some of your most cherished possessions, not to mention the inconvenience of living without them until they can be replaced.

Trust us to keep your valuables safe and let us power your tomorrow. Call Mr. Electric today!

Insect Vision: Ultraviolet, Color, and LED Light, Marianne Shockley Cruz and Rebecca Lindner from the University of Georgia’s Department of Entomology write, “Experimental work supports the idea that color perception exists in insects and that they are especially responsive to the shorter wavelengths of the visible spectrum and UV light.” Wavelengths are measured in nanometers, and shorter wavelengths of light (less than 550 nanometers) can indicate ultraviolet (UV), blue, or green colors. Cruz and Lindner also cite work that confirms the correlation between UV light from the sun and moon and how certain bugs navigate Earth. Another point to remember about bugs is that certain types, such as mosquitoes, are attracted to heat and have thermal receptors to help them find it. All of this information is helpful for determining why bugs flock to certain light sources.

The color that is emitted from a light source is important because of its ability to attract bugs. As previously stated, shorter wavelengths (UV, blue, and green light) are more visible to bugs than longer wavelengths (yellow, orange, and red light) and, therefore, will draw them closer. Incandescent, compact fluorescent (CFL), halogen, and high-intensity discharge (HID) lights emit UV radiation that is attractive to bugs, and since certain types of bugs navigate by UV light from the sun and moon, a closer, brighter source of UV light can disrupt their orientation and draw them in. LEDs produce very little to no UV light, which makes them less visible to bugs. However, it is still possible for an LED bulb to produce shorter wavelengths of light (bluish-white/cool white color), which will be more attractive to bugs. Therefore, when browsing for LED lights that will attract less bugs, it’s important to choose a fixture that emits more wavelengths that are above 550 nanometers, such as warm white, ultra warm white, or yellow lights.

CCT) instead of nanometers, it’s easy to tell if the bulb will be more or less visible to bugs. CCT is measured in Kelvin (K), and different temperatures on the Kelvin scale represent different colors. An LED bulb with a CCT below 3600K will emit warm or ultra warm white light that’s not easily seen by bugs. Bulbs with CCTs of 3600K and above will emit natural or cool white light that is more likely to attract bugs.

Incandescent, halogen, CFL, and HID bulbs waste most of the energy they consume—as much as 90 percent—in the form of heat. Bugs with thermal receptors can sense the heat released by these light sources. LED bulbs produce a minuscule amount of heat, which makes them less appealing to bugs.

Bug lights are simply light bulbs with a yellow coating that decreases the color temperature of emitted light. Because of the coating, bulbs will emit a peak wavelength of light that is around 550-600 nanometers. However, you don’t need a yellow-coated bulb to reduce the presence of bugs. LED lights that emit warm-colored illumination, such as yellow malibu light bulbs for landscape applications, or From top left to bottom right: incandescent bug light, yellow LED strip lights, yellow LED malibu light bulb installed in landscape fixture, and gold-tint LED filament bulbs

Ecologist Michael Justice performed an experiment to determine the type of residential light that attracts the least amount of bugs. He used six lighting types inside of an insect trap each night during the summer. Justice also made efforts to equalize the effects of weather and the moon’s irradiance. His LED Z-Bug Bulb™ from NEBO is a bug zapper and an LED bulb in one. The bulb emits white illumination from its top and ultraviolet (UV) light from its caged center. The UV light attracts mosquitoes and other insects toward the bulb’s high-voltage electric grid and kills them on contact.

Because different types of bugs see different wavelengths, it is never guaranteed that an LED light won’t attract them. However, most bugs are attracted to short wavelengths of light and are especially drawn to UV light; they can see it better, and some use it for navigation. Bulbs that emit more short wavelengths of light (cool white/bluish color) will attract more bugs. Lights that emit a majority of longer wavelengths (yellow/orange/red colors) are less visible. Heat can also draw bugs into an area. LED lights produce little to no UV light and a minuscule amount heat, which makes them less attractive to bugs—so long as they emit longer wavelengths of light.

It is that time again—electric bills are on the rise. You can chalk this up to a number of different causes, but the fact is, electricity is getting more expensive. You can’t do much about controlling the rates, but you can do your part to reduce how much electricity you use and ultimately reduce your monthly electric bill. A Pasadena electrician wants to help you do just that and has some tips for you to implement in your home so you can save a few extra dollars. The team at The Electric Connection can answer any questions you may have about electric savings.

1-It is important you make a real effort to turn off lights and electronics whenever they are not in use. Turning off the appliances is not always enough. You need to unplug your electronics as well to reduce phantom power.

2-Take the time to replace any of your old incandescent light bulbs with the newer, much more energy-efficient CFLs. This can ultimately save you a quick $20 or thereabouts on your monthly electric bill. Don’t put off replacing those old bulbs.

3-Switch your dishwasher setting to air dry. Only wash full loads to conserve energy.

4-Air dry your clothes whenever possible to cut down on your electric bill. Only wash full loads of clothes and if you must use your dryer, only dry full loads.

5-Consider having a ceiling fan installed by an electrician. Pasadena homeowners can take advantage of the cost savings ceiling fans provide on both the heating and cooling bills of a home. Fans can be placed throughout the home to circulate air while keeping the home at a comfortable temperature.

This is just a very small sampling of the energy savings tips you can put to use for you. Give The Electric Connection a call today and schedule your ceiling fan installation.