You should never “lend” your contractors license to anyone, for any reason, ever. There are many good reasons for a contractor to have this “never lend” policy.

However, sometimes it can be advantageous for a contractor to pull a permit for someone else’s work. Like a homeowner installed his own main electrical panel and then he finds out that his city does not allow homeowners to obtain a “Homeowner’s Permit” for that job.

Without going into a lot of explanation, here is a form I made up a few years ago that has minimized my risk and maximized my profit in these situations. WARNING! Is this legal in your state? I’m not the guy who knows or is going to find out; that’s up to you. But, anyway, here’s the form:

I _____________________ am requesting that The Electric Connection

Print Name

obtain an electrical permit for electrical work located at

__________________________________________________________

Address City State Zip

I am aware that The Electric Connection did not perform this electrical work and is not responsible for any corrections or repairs required as a result of either the electrical work or the inspection of this work.

I am aware and agree that The Electric Connection is obtaining a permit for work that was done by others and that The Electric Connection is not responsible for the quality and/or safety of this work now or at any future time, and that The Electric Connection is not responsible for any present or future liabilities arising out any of the work covered under this permit.

For the sum of __________ plus the exact cost of the electrical permit, The Electric Connection will obtain an electrical permit for this electrical work. If the electrical work does not pass inspection, I may or may not choose to hire The Electric Connection to make any corrections necessary to bring the electrical work up to city/national electrical code standards as required by the electrical inspector.

If I choose to hire The Electric Connection to do this electrical work, I am aware that there will an additional charge for this work, and that this additional cost will be mutually agreed by myself and The Electric Connection before any work is started.

________________             ___________________ Signature                                    Date

———————————————————————————————-

Visit our company profile.

Restriction of Hazardous Substances (RoHS): RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Warranties

Super Bright LEDs, Inc. offers a minimum 2-year warranty to protect against manufacturer defects and malfunctions. Longer warranties are available depending on the product. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair, or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.

Read more

Lifetime Warranty

Super Bright LEDs, Inc. offers a Lifetime Warranty on a variety of products to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.

Read more

CE: Meets European health, safety, and environmental standards

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

UL Recognized: Product component safety and environmental certification from Underwriters Laboratories (UL) LLC

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.

DLC: Listed as a quality, energy-efficient product by the DesignLights® Consortium (DLC®)

The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC’s Qualified Products List. For more information, click

DOT Approved: Approved by the Department of Transportation (DOT)

The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.

SAE International Class 1: Classified for use as emergency vehicle lighting by the Society of Automotive Engineers (SAE)

Vehicle warning lights are ranked by the Society of Automotive Engineers (SAE) according to class. A Class 1 LED light delivers the most amount of light (in comparison to class 2 and class 3 lights) and is ideal for emergency lighting on ambulances and fire trucks as well as police and rescue vehicles.

ETL Listed: An ETL-Listed product meets national safety standards

A product that bears an ETL-Listed label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.

FCC: Complies with Federal Communications Commission (FCC) rules. Won’t cause harmful interference.

Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won’t cause interference with other electronic devices. According to FCC’s website, “The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories.” Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC’s guidelines and limits and do not cause harmful interference.

SAA: Standards Australia (SA) compliance

Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.

IP65

The weatherproof product allows zero entry of dust. It is protected against jets of water and may allow limited liquid entry.

IP66

The weatherproof product allows zero entry of dust. It is protected against strong jets of water and may allow limited liquid entry.

IP67

The waterproof product allows zero entry of dust. It is protected against the effects of immersion between 15 centimeters and 1 meter.

IP68

The waterproof product allows zero entry of dust. It is protected against long periods of immersion under pressure.

IP69K

The waterproof product allows zero entry of dust. It is protected against high-temperature, high-pressure water and steam.

UL 844: Meets requirements from Underwriters Laboratories (UL) LLC for use in hazardous (classified) locations

UL 844 requirements cover fixed and portable luminaires for installation and use in the following hazardous (classified) locations in accordance with the National Electrical Code, NFPA 70:

These requirements cover luminaires for use only under the following atmospheric conditions:

Summer months are notorious for power surges and outages due to the high demand for power air conditioning units place on the grid. Outages are definitely inconvenient, but they can also be very costly to you. If you are not home during an outage and cannot unplug sensitive electrical equipment like your computer before the power comes back on, a surge could destroy the computer. Surges are common when the power is restored. Surges can also occur during a thunder storm. Again, storms happen anytime and you know to unplug items during a storm, but what if you are not there?

Your electrician in Beverly Hills can help you protect your appliances and sensitive equipment by installing a whole-home surge protector. The staff at The Electric Connection These devices are installed on the outside of the home at the breaker panel and help regulate the electricity that comes into the home. When a surge hits, the devices deflect it away from your expensive appliances. As a second line of defense, it is strongly recommended computers and video equipment be plugged into a surge protector inside the home. These are the long strips with several outlets, which you can install yourself.

Another option to consider is the equipment on the outside of your home. Things like your air conditioner unit, hot tub or pool pump are all at risk of electrical surge Your Beverly Hills electrician can talk with you more about how you can protect the costly equipment with exterior surge protectors.

Surge protectors are an investment that can ultimately save you hundreds or even thousands of dollars in replacement costs. You never know when a power surge will hit. It just makes sense to be protected all the time. Call The Electric Connection to schedule your appointment for whole-home surge protection today.