A home power outage can happen without warning and at the most inconvenient time. Really, there isn’t a convenient time to lose electricity. We often forget just how much we rely on power throughout the day until we lose it.

The loss of lights, refrigerators, washers and dryers, computers and electronic devices, and more make residential power outages both irritating and disruptive– there are a number of steps you can take to fix the situation.

Diagnose the Problem

There are many reasons you may have lost power.

First, something may have caused an interruption of power from your provider.  In addition, Colorado thunderstorms can cause a disruption , or it could be a problem with a circuit or other electrical system in your home. Loose connectors, device failures, ground movement, underground root growth, or improper wire installation can all cause shorts or overloads as well.

If you have lost power, check with your neighbors to see if the power outage is widespread. If they don’t have power either, the problem is with your power provider, not the electrical systems in your home. Your power company should be informed, and you will have to wait for them to address the issue.

If the power outage is limited to your home, check your main breaker to see if it’s tripped. Flip the switch back on if it is tripped, which may restore your power. If you are only experiencing a partial power outage, you can try to turn on your electric dryer or range as a test. If it doesn’t turn on, or if the main switch trips again at any point, you will need a professional electrician to come and diagnose the specific problem you are having.

A Trusted Emergency Electrician in Arvada

Make sure that the voltage of your LED light is compatible with the truck’s operating voltage. For example, you wouldn’t want to use a 6-volt light with a 12-volt system. That bulb will burn out very quickly. Or say you use a 24-volt light on a 12-volt truck—if you get any light output at all, it wouldn’t be near what is possible from that light.

When you’re installing new LED truck lighting, lubricate sockets, terminals, or any associated electrical connections with dialectic grease to seal out moisture and prevent corrosion. Because the grease can dry up, you should check connections periodically. It’s important to keep connections lubricated to maintain the functionality of your light. However, too much grease can interfere with the terminal/socket connection and prevent a light from functioning.

Be sure to know and understand the rules set in place in the light’s warranty. Doing unauthorized repairs or disassembling the light will most likely void its warranty. A driver should also know the correct person to contact about their LED truck lighting in case of light malfunctioning. The point of contact could be the fleet’s parts department, the purchaser, or the company from which the light was purchased.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

This summer is already heating up and it is time to make the best of the warm weather. It is an excellent time to enjoy the outdoors while relaxing alone and with friends. Sitting on your patio is nice, but imagine sitting on your patio in a tub of hot, bubbling water. A hot tub is a luxurious way to unwind after a long, hot day at work. Sitting on your patio in a hot tub and watching the sun go downs is a little slice of heaven, right here on earth. If you are ready have your own hot tub installed, you will need to contact your local Burbank electrician. You can count on the team at The Electric Connection to help you get your new hot tub up and running.

You will want to visit your local hot tub dealership to pick out the perfect one for you. There are various sizes and styles out there. Once you have decided on the hot tub, it is time to call an electrician. Burbank residents will need to determine where the hot tub will be placed. There are a few things you will need to consider before you schedule your installation. Because your new hot tub will need electricity to operate, you will want it somewhat close to your home to avoid the electrician having to dig a long trench through your yard.

Once you have determined where to place the hot tub, it is time to schedule delivery. An electrician will hardwire the hot tub to your home. You will need a new breaker installed to support the 240-volt outlet required to run the hot tub. Depending on the status of your current electric panel, you may need an electric panel upgrade. Your electrician will do a quick inspection and let you know what is needed. Give The Electric Connection a call today and schedule your hot tub installation.