One of the most exciting innovations in lighting in recent years has been the light emitting diode (LED) bulb, which promises to usher in a new era of energy efficiency. These bulbs use considerably less power than a traditional incandescent light and even a compact fluorescent (CFL) bulb while providing the same amount of illumination. They can also last many years longer.

But one of the most important features of LED lights is that they can be connected to a network, and with the power of the internet, your lighting can become "smart," anticipating when the house is occupied and when it is vacant, as well as adjusting brightness to better accommodate your lifestyle.

Your home is supposed to be your safe place, your sanctuary, but if you have an older home, it can quickly become a nightmare. Old home wiring, especially if the wiring is 50 years or older , can put your home and everyone it it at risk for an electrical fire. While wiring doesn’t quickly age, it does age, it does break down, and it does carry risks. Keeping an eye on your home’s wiring and the way that it behaves is one of the best ways to avoid an electrical fire and protect your home. Your home is trying to tell you exactly what it needs more often than not, so keep an eye out for some of the following signs that your home’s wiring is too old and needs to be replaced by a professional electrician.

While there could be a variety of reasons you might have dimming or flickering lights in your house, if it becomes a regular occurrence, it’s time to get an electrician out to your house. These kinds of symptoms are your house telling you that there is something going on in your electrical system. Whether it’s that there is too much power being drawn at one time or that the wiring is failing, a licensed electrician can help to diagnose and fix the issue.

If you’ve had a rodent problem in your home at any time, it’s exceptionally important to have your electrical system evaluated. While rodents would prefer to munch on the cereal in your cabinet, there is something about home wiring that is exceptionally appealing to them. While they’re burrowing around in your walls, there is a high chance that they either chomp through wiring or knick it enough to expose the wiring to the insulation in your walls. Both scenarios can put your home at risk for an electrical fire at any time.

If you’ve never had a circuit breaker trip on a regular basis, then you probably don’t know how absolutely frustrating it can be, especially when the problem is probably hidden somewhere behind the walls. A circuit breaker that continues to trip is a big indication that something is wrong with your wiring. Instead of trying to force it on, make sure to call your electrician to help root out the cause of the problem in order to fix it.

If you’ve ever gone to plug in an appliance and been shocked, that’s probably not a good sign. However, if this happens regularly where you get shocked or your switches and outlets start to look discolored from burns, you have a big problem on your hands. These signs are indicative of a wiring problem and wiring shorting from the energy heavy appliances that are more common today. Don’t just hide the problem with a new outlet cover, have the problem checked out and repaired.

Lastly, don’t dismiss random burning smells or the sharp smell of burning ozone. Both could be indicators that something is going on behind your home’s walls that you can’t see. When you flip a light switch, this connects a live electrical wire and allows power to continue into a light fixture or appliance. If there is burning when the switch is flipped on, the odds are the problem is in the wiring that connects the switch and the light fixture. However, a licensed electrician can determine the extent of the damage and what the problem is.

Homeowners have a powerful tool at their disposal that they may not even be aware of. Lighting can make or break a room. Having new, updated light fixtures in a room can completely change the way the home looks and feels. And although the actual work is not all that labor intensive, it is crucial you have a Glendale electrician perform the work. Working with electricity is something that should be left to the professionals like those at The Electric Connection.

It is amazing to see the difference a single light fixture can make in a room. Changing lights throughout a home is like giving your house a major facelift without any serious expense. There is so much you can do to change the look and feel of a room simply by visiting your local lighting store or your favorite home improvement store. Hanging chandeliers, recesses lights, track lighting and so much more is all available for you to use to your advantage.

You can easily turn a dark kitchen into a brilliant space with plenty of lighting right where you need it. Turn your dining room into a romantic area with lights that are controlled with a dimmer switch installed by an electrician. Glendale homeowners will have the freedom to control how much light you have. That one particular picture in the living room hanging over the mantle deserves some special recognition. Use recess or track lighting to direct light onto a family picture or a prized piece of artwork to really make it pop and become a focal point in the room.

The possibilities are endless. Take a walk around your home and look at your current lighting scheme. Could you do something different? Then head to the lighting store and pick up the fixtures that will compliment your home and décor. When you are ready, give The Electric Connection a call and schedule your appointment for your new lighting fixtures to be installed. It is that simple!

Most people have dealt with a power cut at some time or the other. There could be a very bad storm or lightning could strike and the power could get cut; but it also returns quite quickly. However, you might switch on the computer and notice it has stopped working.

This is caused when lightning hits a power line which results in a sudden surge on the electrical pressure that overloads the electronic circuitry. It’s true that lightning strikes cause power surges; even everyday appliances in our homes can cause power surges every time they are switched.

Over time, these seemingly small surges can cause a lot of damage to your property; and they slowly reduce the lifespan of your refrigerator, computer or air-conditioner or any other appliance that’s plugged into a power outlet or any that’s been hardwired into the electrical system in your home. The one way to protect your property from damage is to learn more about what power surges are.

Across Australia, the basic electrical voltage for residences is 230V + 10% up to – 6%. The load vibrations are taken into account in this particular range, as the appliances quickly cut in & out. In case the voltage increases above the working range of the appliance, it can result in arcing in the appliance.

These arcs generate heat, and these results in damage to the electrical components within the appliance. This type of damage is cumulative and the appliances are still able to function normally, till the point the damage becomes so excessive that your PC or TV just stops working for no apparent reason.

For all plug-and-play appliances like your TV and PC, you can connect them to a point-of-surge protector, and that becomes a very easy solution. This particular system is very much like a standard power board. You simply have to plug in the appliances that have to be protected, into the device. This device doesn’t suppress/arrest the surge; it redirects that surge straight into the ground. If you have to protect only a single appliance and a point-of-use protector doesn’t fit, then it’s possible to get a special outlet with the built-in protection installed.

Even as the point-of-use devices protect various appliances which are typically plugged into any power outlet, you would have to get another device to protect those items which are hardwired into the electrical system of your home, including the lights and air-conditioners. These devices can be easily complemented by an electrical panel surge protector.

If it’s installed inside the mains, it will level out the fluctuations and power spikes; or it might also stop them well before they reach the devices. When a mix of electrical panel surge protection and point of use protection are used, it helps provide your equipment and devices from very powerful voltage spikes.

If you have consistently experienced any power surge issues in the past or if you want to just protect your property against the probability of surges, you only have to call us and speak with our experts. They will provide you with all the information and guidance you need and will ensure that you get the kind of solutions that work perfectly for you.

For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of CBUS installations. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

Electricians have been using copper for electrical wiring since the 1820s. It may surprise you to know that since then, we’ve never found, or needed, a replacement! Copper has numerous properties that make it ideal for electrical wiring. In fact, we can likely expect copper to continue to be used far into the future.

Ductile and Malleable—ductility and malleability are two very useful properties of metals. Something that is ductile can be hammered into a thin wire easily, and something malleable can be manipulated and bent into shapes easily. These properties make copper wires inexpensive to produce and easy to install.

Excellent conductivity—copper’s electrical conductivity is far superior to other types of non-precious metals, which allows it to carry greater amounts of current with a smaller diameter wire.

Non-corrosive—one of the biggest benefits of copper wiring is that it is non-corrosive, able to survive in harsh environments with almost no risk of wear and tear. It’s not uncommon to see copper wires last for 40 years or more!

All of these properties make copper the gold (or should we say copper!) standard in the electrical industry. For both commercial and domestic purposes, copper is considered the go-to material for wiring. In fact, most modern buildings being constructed today are designed to accept copper wiring. The prevalence of copper wiring makes rewiring a lot easier as well.

During the 1960s and 70s, aluminum wiring was used in many homes as a cheaper alternative to copper. Unfortunately, problems were discovered with aluminum wiring. The biggest danger associated with aluminum wiring is that it can react to materials used in outlets, light fixtures, and splices, where it can oxidize, deteriorate, overheat, and catch fire. The CPSC estimates that about 2 million homes were built with aluminum wiring between 1965 and 1973—and many of these homes are located in the MD, VA, and DC area.

The other problem with aluminum wiring is its high electrical resistance, which makes it more difficult for current to flow. As a result, you experience greater losses with aluminum wiring than you would with copper.

More than any other material, copper has stood the test of time for use in residential and commercial applications. If you’ve been thinking about rewiring your home and want to use the best materials possible, call Kolb Electric today!