Mechatronics, or mechatronic engineering combines mechanical and electrical engineering to design innovative products and systems. These systems must rely on mechanical and electrical components working together in harmony.

The list includes DVD disc drives, anti-lock braking systems, manufacturing, electric motors and clothes dryers, among others. These devices require electronic controls and feedback systems to interact seamlessly with their mechanical design.

Motor control systems operate by using a programmable logic controller or PLC. This system allows advanced programming and algorithms to dictate a motor’s behavior. Therefore, they can be programmed to control multiple motors or VFDs. A robotic arm or a large factory machine is a good example of this.

In addition, PLCs can accept inputs from a wide range of sensors and switches. This allows precise feedback from the machine it controls. Furthermore, it executes built-in software.

The smallest high-precision motors, DC motors, found in computer hard drives and DVD readers. Due to their miniaturization, they can be easily controlled by computer software to perform nearly any imaginable task. A battery powered quad-rotor drone offers us a prime example of DC motor control. Accelerometers and gyroscopes feeding data into a computer controller adjust the speed of each motor independently to keep the drone flying level.

A simple technology that combines electric motors with feedback control, known as servomechanisms, provides valuable information. They utilize a small electric motor, gearboxes, and a potentiometer to produce accurate position feedback to the motor itself. This ensures that the motor has moved to the correct position. Thus, precise movement control of a motor is possible. Applications of servos include RC car steering, fly-by-wire systems in aircraft, robotics, and industrial control valves.

Servos communicate with computer systems, allowing them to be part of larger mechatronic systems, so they can be controlled by PLCs and computer algorithms.

The field of mechatronics constantly evolves. Therefore, as it does, it incorporates cutting edge computer software and mechanical design, bringing to life new inventions. These breakthroughs make modern-day living much easier and more fun.

LED foyer fixture from Artcraft

Saving on energy costs and outfitting your home or office environment with new lamps and light fixtures should be at the top of your home improvement project list.  Not only do new light sources deliver a superb quality of light, they are the key components in decorative and energy-efficient lighting design.

It is an exciting time in the lighting industry.  New products are being developed every day, and LED (light emitting diode) and SSL (solid-state lighting)*  lamps and light fixtures are at the core of future illumination.

What’s more, the integration of LEDs into building and electronic communication systems is bringing everything together and enabling total control with the ease of a smart phone!

Here are some guidelines to help you answer those questions and invest wisely toward one of the greatest home improvement projects of the decade:

WHAT YOUR LIGHTING DESIGN CAN AND SHOULD DO FOR YOU…

In addition to providing optimum levels of brightness, good lighting design must also…

•Eliminate glare

•Increase comfort

•Provide continuity

•Deliver good color rendering

•Allow for adjustability

•Instantaneously make you ”feel good” with an inviting luminous appeal

Because LED lamps require so little energy to provide a great deal of illumination, the energy consumed by the bulb will not be your main concern; your main concern will be getting the desired level of brightness and light appearance.

*NOTE:  LEDs, also referred to as SSL, provide the most energy-efficient and durable illumination because they are composed of “solid state” semiconductor light emitting diodes.

1.    Familiarize yourself with labels on new bulb cartons.

Brightness (in lumens)

Estimated Yearly Cost (depends on rates and use, $)

Lamp Life (based on 3 hrs/day use, rated in years)

Light Appearance (CCT)  (warm-cool, rated in degrees Kelvin (K))

Energy Used (in watts)

Color Rendering (CRI) (measured on a scale of 0-100)

BRIGHTNESS

Brightness levels are measured in lumens to give the amount of total light created by the light source.  Beyond the lumen count, “useable” light and brightness levels are also affected by fixture housings, lenses, filters and shades.  There are clear standards set to measure the lumen output of each LED chip.  ↓

LIGHT APPEARANCE  

Light appearance or correlated color temperature (CCT) helps determine the quality of illumination.  Designated on the Kelvin (K) scale, CCT for decorative interior spaces should be in the warm white (2700-3000K) range.  Sometimes lighting in the neutral white (3500-4000K) is preferred for certain areas, such as bathrooms and kitchens.

LAMP LIFE AND THE LED

Lamp life refers to how long a light source will last once it is installed and used on a daily basis in a typical application. Lamp life ratings, based on estimates from testing,  convey the time that half the bulbs in a sampling have burnt out or dimmed below fifty percent.

COLOR RENDERING AND THE LED

The color rendering index (CRI) measures the ability of a light source to bring out the true colors in décor, objects and surfaces.  Based on a scale of zero (no color rendering) to 100 (perfect color rendering),  a minimum of 80 CRI is acceptable for interior lighting applications.  A CRI of 90+ is even better.

However, because the standard CRI measurement does not always yield true results for some LED light sources, a new standard measure of color quality is in the works:  The Color Quality Scale (CQS) may soon replace CRI for a truer account of color rendering provided by the LED light source.-www.ledlightingexplained.com, Philips Solid-State Lighting, 2010

2.    Match light fixture to light source to ensure peak performance.

LEDs small size, low-temperature emissions, and focused uni-directional beam patterns make them perfect light sources for undercabinet lighting, track lighting and pendant fixtures.

LED general and flood lighting replacement bulbs are composed of clusters of diodes to provide broader beams of light.  General service LED bulbs that are multi-directional with 360-degree angle capacity are doing an excellent job of replicating the desired illumination of old incandescent bulbs. These LED  lamps include A19, PAR, BR and candelabra light sources that are providing more light with the added benefit of tremendous energy-saving, maintenance-free illumination.

Due to their long life and durability, LEDs are excellent in hard to reach places like foyer, attic and cathedral ceiling fixtures.

*Check for compatibility with all new light sources to make sure lamps, light fixtures, dimmers and automated controls are a suitable match.

3.    Compare “apples to apples”; diodes to diodes to ensure top quality.

 Many factors contribute to the quality of the LED light bulb.   Advancements in diode technology and mass production of LED light sources are bringing costs down to make these bulbs more affordable.  However, be wary of “cheaper” LED light sources.

•COB (chip on board), the diode itself is composed of a chip that largely determines  the quality of the bulb.

Prior to being marketed in appliances, fixtures or light bulbs, LEDs are sorted into bins according to their light output (lumen output) and color temperature.  Due to the process of “binning,” LED chips vary in their quality—especially in relation to their lumen output and color, so it is important to purchase LED light bulbs and LED light fixtures from a reputable dealer.

LEDs chosen from bins with higher lumen output are of better quality.  Color temperature is determined by matching up each LED according to a chromatic line grid for a specific color temperature.   LEDs chosen from larger bins contain more color variation , so they deliver an inferior quality of light.

•LPW (lumen per watt), this measurement helps to determine energy-efficiency and efficacy

•IC (integrated circuit) drivers, the quality of the LED lamp is also dependent on the type of driver installed.  LED bulbs contain “drivers” that can fail just like the ballast of a CFL (compact fluorescent). Better driver components make for a higher quality LED light source.

ENERGY STAR-ratings ensure that the LED has met stringent testing procedures.  ENERGY STAR-rated lamps clearly identify characteristics on LED light sources to guarantee that they consistently and reliably meet the desired brightness (lumens), energy-efficiency (lumens per watt), color temperature (CCT), color rendering (CRI), and dimmability requirements.

New ENERGY STAR Regulations include:

•Consistency Control:  More standardized testing methods to improve consistency.

•Dimmability Ratings:  A lamp is either dimmable or not dimmable.  If a lamp claims to be dimmable, testing is required and it must dim down to at least 20 percent.  If it is not dimmable, it must say so on the package.

•Greater Energy Conservation:  Efficiency requirements have increased for specific lamp wattages and types.

NOTE:  The Environmental Protection Agency (EPA), along with ENERGY STAR offers rebate programs as an added incentive to help you spring into action and upgrade with LED.  Check out rebate programs in your area or contact an American Lighting Association (ALA)-affiliated showroom for more details.

LED chandelier “Niagara” from Lladro

1800lighting’s Top LED Bulb Pics:

Bulbrite’s  LED  MR16 lamp

Philips medium base LED

Philips dimmable LED

Satco’s PAR38 indoor-outdoor LED lamp

Satco’s Kolour One A19 omni-directional LED lamp delivers 820 lumens and excellent color consistency.

Satco’s Ditto PAR LED lamps are available in 25- and 40-degree beam angles and either 3000K or 4000K.

If you have a lot of appliances running at once,  you can actually increase your chance of having a surge. When high-powered electrical devices such as AC units and refrigerators are working at peak capacity, it takes a lot of energy to keep their motors and compressors going. This high demand can upset the steady voltage flow through your electrical system.

You should also unplug your important appliances during a power outage. There is often a surge when the electricity comes back on.

Additionally, consider a surge protection device which goes in the electric panel where the circuit breakers or fuses are located. The suppressor will channel the extra electricity during the power surge and prevent it from getting into your main system. If you live in an area that experiences a lot of storms, a lightning rod might be a good idea to mitigate the damage of a direct strike. Finally, make sure your homeowner's policy insures you in case a surge does knock out your devices, despite your best efforts to protect them.

Your local Mister Sparky® electrician can help protect your electronics and appliances with whole-home surge protection. Give us a call and we'll explain the options and help you make the right choice for you.

As energy costs continue to climb, and many people become more concern with their overall impact on the environment, solar power has become a serious consideration for more homeowners than ever before. When choosing to have solar installers install solar panels on your home, one of the first things that you need to do is get a good estimate of your home’s average energy usage. You can then work closely with your installer to determine the size of solar power system that works best for your home.

Gather Your InformationThe easiest way to get an estimate for your home’s average energy consumption is to gather your electric bills for the last year. You can then add all of the kilowatt-hours (kWh) that you used each month and divide this number by 12. This will give you the average number of kWh that you used each month. You can then divide this number by 30 to get a daily usage estimate. Because the average number of peak sun hours in the United States is 5 hours, you can divide this daily estimate by 5 to get an idea of how much electricity your system will need to generate each day during these peak sun hours.

Naturally, the number that you arrive to by this process is only an estimate. The cost of solar panels depends largely on the size of the system that you install. The estimate that you create will give you and your solar installers a good place to start when it comes to determining the size of your solar power system. If you are looking for more information about solar panels, the installation process, purchase and finance options, take a look at the rest of the information that we have available here at Solar Panel Info.