On average, over 350,000 home fires take place every year, claiming thousands of lives. How are your smoke detectors functioning? Don't make these mistakes with your smoke detectors:

Make sure your smoke detectors are installed correctly The U.S. Fire Administration recommends installing alarms both inside and outside sleeping areas. At a minimum, alarms should be located on all levels of your home, at least one near each sleeping area and preferably additional detectors in pathways between sleeping areas and exits out of your home. If you sleep with your bedroom door closed, smoke or use heat-producing appliances in or near your bedroom, or have noisy appliances in your bedroom that could block the sound of a smoke detector (TVs, stereos, air conditioners, and more), it is especially important to install one inside each bedroom. Always use a licensed electrician when installing hardwired smoke alarms. Alarms should be installed:

Smoke detectors save lives. Don’t fall victim to these common smoke detector problems or behind today’s recommended standards for protection. Contact Mr. Electric® today to ensure the proper installation and operation of these life-saving safety devices in your home.

Other parts of the country may be warming up and getting ready to use our air conditioners, but we’re still relying on our heaters to get us through more than a few chilly nights. So if yours begins to malfunction, you may start to panic. This is understandable, but know that if you’ve had your system maintained before the heating season began, it may likely not even be an issue with the system itself.

Instead, you may be in need of Newton, MA electrical wiring services for some component of your heater. Keep reading to learn more about how your heater can be impacted by electrical issues.

This applies to both electrical furnaces as well as boilers. Both of these systems use heating elements—a set of coils that burn hot as a current passes through them—in order to raise the temperature of the air (furnaces) or water (boilers).

Both of these systems contain more than one heating element. Therefore, if you one fails you likely won’t lose your heat entirely, but your heater won’t be able to work as efficiently as it otherwise would.

If you’re utilizing a heat pump, then this is the most common electrical problem you might run into. Capacitors are cylindrical devices about the size of a soda can, responsible for sending electrical charges to the motors to start and keep them running.

Capacitors can burn out after years of use, or suffer from wiring issues, causing the heat pump to “hard start” (draining power) or quit functioning all together. You’ll need a professional to replace the damaged electrical capacitors.

Even if you have a heater that runs off of natural gas, oil, propane, or geothermal power, it’s going to have an electrical thermostat controlling it. Thermostats with failing wiring will begin to malfunction, often incorrectly registering your home’s temperature or failing to accurately set the heater. If your heater is failing to reach its target temperature with no other signs of a problem, your thermostat wiring could certainly be to blame.

Had you taken a public poll 20 years ago about the future of solar power and solar energy, the public would have likely expected the technology to have made leaps and bounds by 2013.  Perhaps many would have expected to see solar panels installed on most homes and businesses by now, or even being used to power cars (ala the 1996 James Belushi / Halle Berry movie Race The Sun.) In 2013, in a technological age where most people use smartphones as pocket sized computers, why does it seem that solar power hasn’t progressed much at all?

There are many reasons to help to understand this phenomenon, so we’ve listed some of the most popular below:

One of the most obvious issues that may be holding solar energy back is the idea that if there is no sunshine, there is no power being generated.  Because of this, solar energy doesn’t have the capability to stand alone which will surely hinder its popularity.  Modern consumers are of the instant gratification mindset and are not always willing to take the inconvenient option, even if it may have strong benefits.

It’s no question that there are huge amounts of money tied up in the corporations and investors who control the major energy companies of the world.  The electricity companies have an interest in limiting their competition and they have lobbyists in that will work to protect their interests.  There is also strong opposition coming from competing industries like coal and nuclear energy, both of which are heavily financed and politically influential.

Even with the tax breaks and incentives cited as reasons for solar energy development, the upfront  costs for equipment and installation are still excessively high.   It’s often cited that it would currently cost around $20,000 – $30,000 to install a new solar system on an average American home (before incentives.)  The investment can pay for itself over a 20-30 year period of monthly savings, but most households in the U.S. don’t have the means to spend such a large amount of cash straight away.

As many companies have rushed to be the biggest and best producers of solar panel equipment, the market has seen high competition with most of the solar products being produced cheaply in China.  Because of this, there has been wide concern that modern solar panels are expensive, untested, and of low quality.  The National Renewable Energy Laboratory even estimates that solar panels degrade at a rate of 4.5% annually or more!  At this rate, a new solar panel will lose most of its efficiency before it ever becomes financially beneficial.

We will have to wait and see where solar energy goes in the coming years.  Maybe it won’t be popular for several more decades, or perhaps it will never become popular at all.  Either way, energy is a shifting business that constantly pushes and reinvents itself, so it will be exciting to see what the future has in store for the industry.