You may not think about it often, but the power coming into your home travels a long way before it gets to your refrigerator, air conditioner, or any of the other appliances in your home. On the way, electrical current encounters fluxuations and interference from things like other appliances, machinery, and low quality wiring. That “Dirty” power can cause inefficiency and disturbance in your appliances, making things like the motors in your refrigerator and air conditioner, the circuits in your television, and all of your other electrical gadgets work harder than they need to, and wear out faster than they should.

A Power Conditioner will take the electrical current coming into your home and “clean” it, using filters to isolate power outlets and remove interference. This provides the correct voltage level to sensitive electrical equipment, allowing it to work safely and efficiently at the correct voltage.

Because power conditioners help your appliances run more efficiently, they can also lower the overall cost of running these appliances, and extend their lifespan. For more information about home power conditioners or for help on any electrical project in your home, please reach out to www.electricmaninc.com

Creating that relaxing and efficient bathroom you’ve been dreaming of is a great project. Finally getting to pick out that perfect whirlpool tub or that delicate sconce lighting that you’ve always wanted can be fun and exciting, and it can also be the beginning of the end of years worth of wishful thinking and making do. But, don’t get too carried away with all that planning before the practical matters have been considered, such whether your electrical system is equipped to handle the changes you have in mind. Consulting an electrician to evaluate your system and your remodeling plans is an important first step.

Replacing older bathroom lighting fixtures with new, modern ones is a job that can be a bit more complicated than it may seem at first glance. Newer fixtures, like whirlpool tubs or modern lighting options are designed for new homes with modern electrical systems. Installing them in an older home can present some challenges as far as your wiring system is concerned, making it necessary for your to do some wiring or electrical panel upgrades. Or, you may need additional switches or outlets installed to make everything work. Knowing these details ahead of time can make your project a lot less complicated, so it makes sense to have your electrician Burbank specialist look over the situation before you begin.

No electrician will be more skillful and professional in evaluating the electrical needs of your remodeling project than The Electric Connection. Our well trained and dedicated staff places a high priority on exceptional customer service, which combined with their reputation for high quality work, has made them the highest rated electrician in the area. The Electric Connection can help you determine whether you’ll need electrical upgrades to make your remodeling plans practical.

Click here to visit our website.

Cleaning a crystal chandelier isn’t as daunting as it may appear. These precious fixtures require a little more love and care than a desk lamp, but you can restore and maintain your crystal’s shine with common household products and a little know-how.

Everyday Care

If your chandelier is still sparkling clean, simply dust the fixture with a lambswool or feather duster every few weeks. Keep your strokes light, since leaded crystal is softer than glass—even dust can scratch it. Be sure to walk around the fixture as you dust, rather than spinning it towards you. Twisting the fixture can strain the wiring or loosen its support.

Spring Cleaning

Eventually, the fixture will need a more thorough cleaning, especially if it’s in a high-traffic area or kitchen. Mid-size chandeliers are still manageable at this stage, provided you have some clean, lint-free rags, isopropyl alcohol, and a little elbow grease.

Before touching the chandelier, follow rule number one: turn off the power to the room when dealing with a ceiling fixture. At least flip the light switch off and tape it so no one will accidentally turn the light on while you’re working. Set up an alternative light source to aid the cleaning. Once the chandelier bulbs have cooled, cover them with plastic snack bags and secure with a rubber band.

Fill a spray bottle with one part isopropyl alcohol and three parts distilled water. Spray on one section of the chandelier at a time, then wipe off with a white cotton glove or lint-free cloth, making sure you dry the frame as well as the crystal. This solution will clarify the crystal and help remove the haze, but is gentler than ammonia on crystal with a design or edge finish. Even so, gently wipe away after spraying and don’t allow the fixture to drip dry. This will help preserve the frame.

Try cleaning your chandelier every two to six months with the alcohol solution, depending on whether the fixture is in a high-traffic area or not.

Heavy Restoration

If your fixture hasn’t been cleaned in a long time (or just needs extra attention), you can go an extra step before calling a professional. This is where a digital camera comes in handy, as you’ll need to remove individual pendants for a more thorough washing. Take pictures of the connections for reference later, then carefully remove the pendants. You may need a pair of needle-nose pliers to help disengage the pendants from the fixture.

Fill a sink with warm water and some gentle dish soap. Carefully wash each crystal piece and rinse in warm water to avoid any drastic temperature shifts. Set the pendants on a clean cloth to dry. Then simply rehang the pendants and enjoy your sparkling fixture!

Most people are familiar with smoke alarms or detectors as they are requirements in all commercial and residential buildings. But how do they work? And how do you ensure that they are functioning at their top performance?  If properly maintained, smoke alarms can and have been proven to save millions of lives in the case of a fire.

In general, there are two different types of smoke alarms.

Ionization means that the device is equipped with two plates that create a charge. When smoke passes between these plates, the charge is interrupted and forces the alarm to sound. In contrast, a photoelectric smoke detection system works similarly but is equipped with a light beam. When smoke passes in front of the light, the alarm sounds. Each function is beneficial in different instances and because of this, one is not necessarily better than the other. It is, however, recommended to have one of each of these functions on each floor of your home and in high-risk areas such as the kitchen or near fireplaces or heating appliances.

To ensure your family’s safety, it is recommended to check your smoke alarm once a month. In order to do so, you can simply push the test button on the smoke alarm. If it does not sound the alarm, you should check the battery and replace it immediately. You could also light a match near the smoke alarm to ensure that it is functioning at top performance.

For more tips and assistance with your smoke alarm maintenance, contact one of our electricians at Expert Electric – 604.681.8338.

Installing a backup generator can be a great benefit to many situations, but there are still people who think generators are more hassle than they are worth. The truth is there are a lot of myths and untruths out there about how backup generators work and run. Let’s take a few moments to debunk the three most common myths:

Truth: Installing a backup generator is a good idea if you want to ensure you have power during storm season and the cold winter months—times when the power has been known to go out due to high winds, lightening, or icy power lines. These generators can provide power for any family that needs to keep the electricity flowing; whether it’s to keep the food in the freezer from thawing, to keep the family comfortable during extreme temps, or just for convenience.

Truth: While you may remember the loud, noisy, and sometimes even smelly generators from years ago, the modern versions are not nearly as disruptive. If you use a diesel generator, you may still get some of that odor, but when it comes to noise it’s really not that loud. It’s more of a soft whirring sound than it is a loud motor sound. Your neighbors will likely not even know it’s running…that’s how quiet generators are these days.

Truth: If your only frame of reference for a backup generator was from 30 years ago, you may think the power you get will be unreliable. This can still be true for certain generator models, but you can turn to professional electricians to help you find the right generator to meet your needs. If you need the generator to be consistently reliable, you are sure to find a model that will fit the bill. You can also purchase surge protectors to help with this issue and protect more sensitive electronics like computers and important medical equipment.

Don’t let these common myths keep you from experiencing the peace of mind and protection a backup generator can bring to your home. Even when the power goes out, you can continue to use essential electronics in your home and keep your family comfortable when you have the right generator installed.