If you are thinking about beating the heat this summer with a new pool in your backyard, you will need to hire an electrician in Pasadena to complete the wiring. A new pool is an exciting toy that will lead to hours of fun for the whole family and of course, family friends. There are plenty of tools needed to keep your pool clean and safe to use. Tools like filters, pumps and heaters if desired, all require electricity. Water and electricity do not mix so it is important an experienced electrician, like those at The Electric Connection, complete the wiring for the pool to ensure it is safe. Even if you are choosing to go with an above ground pool, there is still some electrical that will be needed to operate the filter and pump.

The following are some of the things that will need to be addressed when bringing your pool up to Pasadena electrical codes.

*Depth of the wiring must be buried at least 18 inches for PVC conduit or 6 inches deep for EMT conduit. Your electrician can discuss this in more detail with you.

*Your pool will need a dedicated breaker and outlets to run on. The outlet needs to be no closer than 6 foot from the pool’s edge and no farther than 20 feet from the pool. This is the receptacle that will be used to power your filtration system, pump, heater and an automatic pool cover if you choose.

*Lighting inside the pool and around the pool area will also need to be installed by an electrician.

If you home’s electric panel is already maxed out, you may need to have a sub-panel installed to run the various equipment needed to keep your pool in tip-top condition. Give The Electric Connection a call and schedule an appointment to discuss your pool installation needs.

A 9-year, $3.8 billion study conducted at The Medical College of Wisconsin in Milwaukee in collaboration with the Institute for Natural Medicine and Prevention at Maharishi University found “a 47 percent reduction in the combination of death, heart attacks, and strokes” in those who practiced transcendental meditation daily. Does pretending to breath in light still sound weird?

I also encountered a study found that “Meditation provides a good starting point for learning and creativity.” The researchers assert that “There are strong pedagogical reasons for including meditation as part of the daily experience of pupils of all ages and abilities.” The study concludes that “Meditation is a proven means for stilling the mind, encouraging mindfulness, and providing optimum conditions for generative thinking and reflection.”

I’m sold. But, you know what? I’m also “sold” that drinking kale juice every morning would be great for me. That doesn’t mean I do it. Meditation, I’m convinced, is GREAT for you and for everyone. I really believe that. But how does one meditate? And when? And what will people think of me if I stare into the dark center of a candle’s flame daily?

For me, the benefits of meditation outweigh any concerns, and using the candle light solved the problem of how to meditate. I think it would be cool to stare at the dark center of a flame for a few minutes per day. Better mood? Increased focus? Better thinking and reflection? Less risk of heart disease? Yes, I think I’ll sign up.

You know, it goes without saying, but light is truly amazing.

In these modern times, where a lot of stress is put on the importance of recycling and saving resources, one may wonder if it’s wise to use reconditioned electrical equipment. After all, it is a great way to save money and use materials that would otherwise be thrown out. But one also must consider safety which is key when you are thinking about any kind of electrical materials. Well, that truth is, there are some times when it is safe to use reconditioned electrical equipment, and other instances when it is not. Read on to find out the best ways to determine whether the reconditioned electrical equipment you are using is safe.

Many people believe that reconditioned electrical equipment is not safe. The truth is, sometimes it can be even safer than its original state. This can be the case when old parts are replaced with newer components that are safer and more efficient. However, that doesn’t mean that all reconditioning is done safely. Determining whether or not your replaced parts are in accordance with safety standards. A few prerequisites must be met by the company that is updating the equipment.