We’re thrilled to offer new LED Skylights! Designed for dental office lighting, hospital lighting, classroom lighting, waiting rooms, basements, or other applications with suspended grid ceilings, the decorative LED light panels are an innovative alternative to window skylights. They feature vivid sky designs that are printed directly on panel lenses. Using Even-Glow® technology and diffused optical lenses, these panel lights deliver smooth, flawless illumination without visible bulbs or hot spots. The 2-by-2-foot and 2-by-4-foot panels are available in dimmable and non-dimmable versions. Dimmable panels offer an alternative ceiling and wall surface-mount option in addition to suspended grid ceiling mounting.

LEDs in the panel lights are designed to last three times longer than fluorescent tube light bulbs without the notorious hum or flicker they produce. Each LED panel light has a slim aluminum alloy frame. Non-dimmable panels are equipped with a UL-Recognized constant-current driver. Dimmable panels have an internal 0-10-volt dimmable constant-current driver. Dimming can be achieved with a 0-10-volt switch or by using the light’s power-cycle feature to activate set brightness levels. The energy-efficient panel lights operate within a wide 100-277V AC range.

Sun Beams

Jet Set

Summer Sky

Balloon 1

Balloon 2

Large factories, refineries, and oil facilities are all industries that require special considerations for their electrical wiring. Heavy-duty applications and hazardous environments must use products built to resist corrosion. Chemicals, rain, snow, wind and other threats damage industrial wiring. As a result, good maintenance and repairs are imperative.

With a properly installed tray system, the next step includes teck cable. This armored cable with an exterior jacket, comes in nearly any combination of conductor sizes, voltages, and cores. Fiber optic, CAT6, and shielded twisted pair cables are available. These are usually color-coded based on their type. Teck cables can be pulled through cable tray, conduits, or buried underground. For buried cable, ensure that it is placed at the appropriate depth, protected by layers of sand, spaced properly, and that buried cable warning tape is conspicuous.

Some clients request protection for buried cables; therefore bricks, concrete slabs, or planks of wood are utilized. Where cables emerge from the ground, they should be protected by a PVC conduit sleeve. Teck cables must be secured to the rungs of the tray using approved Ty-wraps or cable clamps. This not only keeps cables neatly arranged, but reduces the chances of damage.

Once a teck cable has been fed to its destination, it is connected by use of a teck connector. These connectors serve two purposes. The threaded end puts tension on the cable by means of a rubber gasket, which holds the cable securely in place. In addition, a small metal star-ring inside the connector makes contact with the metal armor of the cable, bonding it to the connector. This is why, when preparing a cable for the connector, that 3-4 rings of cable armor are left exposed.

In locations with potentially hazardous or explosive gasses, explosion proof connectors must be used. They have a small internal chamber meant to hold an epoxy sealing compound. This seal contains an explosion in the event of a failure. In addition, it prevents gasses from traveling through the small gaps between wires to potentially non-hazardous locations where arcs and sparks cause harm.

Good working knowledge of industrial wiring applications is essential to ensure safe and reliable installation. Finally, with the use of heavy-duty materials, a facility can expect many years of problem-free service.