We can always find ways to save a few extra dollars, but sometimes it can be little difficult to pinpoint exactly where those savings are to be had. You may look at the budget over and over and still keep coming up with the same bottom line. An electrician in Santa Monica can help you discover a few ways you could cut your electric bill without dramatically changing your lifestyle. If you ever have any questions or concerns about these tips, you can call The Electric Connection to ask more questions.

1-Get rid of any of those remaining incandescent light bulbs. They are costing you money. You can shave 20 percent off your electric bill simply by relying on CFL and LED bulbs that are much more energy efficient. They tend to be a bit brighter as well.

2-Have a ceiling fan installed in a central room of your house. This will help circulate hot and cold air produced by your furnace or air conditioner. Ceiling fans run on a fraction of the electricity of a heating or air conditioning unit. It is a good idea to have the fan installed by someone familiar with Santa Monica electrical codes.

3-Ask every member of the household to shave off 2 minutes from their average shower time. This can save a lot of money on your electric bill by reducing the demand put on the hot water heater. You could also turn down the thermostat of the water heater by about 5 to 10 degrees and save even more money.

4-Unplug any appliances, computers and electronics when they are not in use. When you leave for the day or go to bed at night, unplugging your electronics can save you money on wasted phantom power.

Give The Electric Connection a call today to have your ceiling fan installed or to learn more about energy savings.

As a homeowner, you’re going to occasionally need professional repairs made at your house. For many jobs a cousin, a friend’s brother, or a great handyman recommended by a neighbor may be able to do a great job for a low price and it would be foolish not to accept those people to make light repairs or upgrades. However, when it comes to electrical work such a solution just doesn’t fly. First, it’s not legal for anyone who is not licensed to conduct electric work to your house. Second, there are safety issues involved if electric work isn’t conducted properly and third, if those safety issues come into play your insurance coverage is going to be void when their inspector determines unlicensed repairs have been made.

Typical Electric Repairs

A significant number of homes in Baltimore and Bethesda, MD, Alexandria, VA, and Washington, DC built between the mid-1960s and the first half of the 1970s have hazardous aluminum wiring rather than copper. During that time, aluminum wiring was considered safe to use and viewed as a cost-saving measure. The U.S. Consumer Product Safety Commission (CPSC) now believes aluminum wiring poses a safety hazard in homes that still have this type of wiring.

The biggest danger associated with aluminum wiring is that unanticipated fire hazards arise from the oxidation and deterioration caused at the points where aluminum wiring is connected at outlets, light fixtures, and splices. While this can cause overheating and arching that won’t trip a circuit breaker, it can cause a fire. Aluminum wiring was used in an estimated 2 million homes between 1965 and 1973—and many of these homes are located in the MD, VA, and DC area.

If you’re concerned about dangerous aluminum wiring, pay attention to the following warning signs:

All of these signs indicate a potential fire hazard for standard aluminum wiring.

Aluminum wiring should be thoroughly evaluated by a qualified electrician who is experienced in inspecting and correcting wiring problems. The CPSC recommends a few methods for correction. The first is to rewire the home with copper wire, an expensive option that really only makes sense if the homeowner is already in the process of completely remodeling or doing deep renovations. The second option is to use the Copalum crimp method to correct the problem. This involves attaching a piece of copper wire to the existing aluminum wire with a specially designed metal sleeve and powered crimping tool. It is a permanent repair option that will eliminate the dangers posed by aluminum wiring. A third option is to use a UL listed copper to aluminum connector to attach a copper wire to the existing aluminum wire.

Only an experienced electrician can accurately determine the level of danger a home with aluminum wiring faces, and then fix the problem in an efficient, timely manner.

If your home has aluminum wiring, we recommend that you call Kolb Electric or contact us online. We will send one of our expert electricians out to evaluate the aluminum wiring in your home to determine the best option to make your home as safe as possible. We’ve been serving Baltimore and Bethesda, MD as well as Alexandria, VA and Washington, DC since 1925. You can count on our experienced electricians to get the job done right the first time.

If you’ve ever watched the show “Holmes on Homes” on HGTV, you’ve likely seen the problems associated with old or faulty wiring.  Mike Holmes tends to get very agitated by safety issues, and for good reason.  Each year, over 40,000 homes suffer fire damage due to home electrical problems.  These electrical fires account for hundreds of deaths and thousands of injuries.  And what’s the main culprit?  Old wiring!

If you live in a classic home built before 1940, chances are you have old wiring in the house.  You may have knob-and-tube or Romex wiring, both of which can become brittle over time.  The insulation dries out and starts to crumble, causing the inner wire to become exposed. The cloth insulation around the wire deteriorates with age and eventually becomes unsafe.

But perhaps one of the biggest threats of Romex and knob-and-tube wiring is that these types of wires aren’t grounded.  That means if one of your appliances shorts out, you could become the path to the ground for the electricity.

Even if your home is only 20 or 30 years old, you could still experience electrical problems at home due to a lack of capacity.  Most homes built more than 10 years ago are not designed to handle the amount of electronics we use today.  Think about it:  if your house was built in 1980, it was built before home PCs and laptops and HDTVs and surround sound and all of the other toys and gadgets we use today.  These appliances can draw a lot of power, and your current electrical wiring may not be up to the task.

If you own one of the one million houses in the DFW area that’s more than 20 years old, it’s a good idea to have a licensed electrician come out and take a look at the wiring.  He or she can make sure that your house will be safe and productive for many years.

ElectricMan Inc. is one of Plano’s most trusted electricians. Nick Schaeffer, Mr. ElectricMan himself, has quite the resume for a master electrician. He started the company by himself in 2004 and hasn’t looked back since! For more information about Electricman’s list of electrical repair services, please visit www.ElectricManInc.com