Electrical ballast replacements are a common project in both residential homes and commercial buildings. An electrical ballast is a device used to regulate electrical currents so that they do not reach uncontrollable levels. A common application of electrical ballasts is those found in any type of light structure such as fluorescent or neon lighting systems. Depending on the size of the replacement project, a licensed electrician isn’t always necessary; however, if you don’t have the proper tools or experience, it is a good idea to consult with a licensed electrician before attempting the replacement. To simplify the procedure, here are the answers to three common questions about electrical ballast replacement.

Similar to replacing a light bulb, if you have any type of neon or fluorescent light, you will eventually need to replace the electrical ballast in the lighting structure. Replacing the electrical ballast is a more reasonable solution than replacing the entire neon or fluorescent light structure. You will know when it’s time to replace the electrical ballast because the light will begin flickering or will stop working entirely.

Yes, you can perform a ballast replacement yourself. While ballast replacement can be a simple procedure, if not done properly you can cause damage to your replacement bulb but also the fixture. Before performing the replacement yourself, make sure you are confident and understand all the steps involved or you could end up with expensive bills you were trying to avoid. If you require assistance or have any questions about electrical ballast replacement, contact our team of licensed electricians at Expert Electric. We would be happy to help.

Thankfully, an electrical ballast replacement does not require a fully stocked tool shed in order to be completed. For most electrical ballast replacements, a few simple tools will do the trick. Depending on the type and size of your replacement, your replacement may require a simple screwdriver, nut driver, drill, pliers and wire stripper. This is in addition to the new electrical ballast which you will be replacing.

For more information on electrical ballast replacement, please contact the licensed electricians at Expert Electric. You can reach us at 604-681-8338 or you can book an appointment online through our website. For 24/7 immediate response emergency service, please fill out a form on our website so that we can get in touch with you as soon as possible. We offer various types of electrician services including electric water heaters, surge protectors, ceiling fan installation and we service all throughout the Greater Vancouver area and Lower Mainland.

Electrical jobs should never be turned into a DIY project, unless you have formal training and experience in the field. While electricity is extremely useful and necessary, if it isn’t handled correctly, it can be pretty dangerous too. If you get a novice to handle the job for you that can result in overloaded circuits, poor wiring connections or even faulty grounding, which can be extremely dangerous to you and your family and result in a fire outbreak as well. Here are some common services for which you would need to call in an electrician:

The main electrical panels provide electricity to your entire house. If you have older panels with fuses and older wiring, those may not be able to bear the load of any new appliances you decide to install on your property. The latest electrical appliances tend to add heavy loads on the system and your older wiring installations won’t be able to support those loads. If you are getting new appliances, call in a licensed electrician to test and inspect the wiring and circuit breakers on your property.

If you need any new outlets installed or need existing ones converted to USB ports, you would have to call in an electrician for the job. Oftentimes, electrical codes necessitate that a minimum of 1 outlet in your kitchen and bathroom be a GFCI outlet. These are specifically designed to shut off the power in case there is an imbalance in electricity or if water comes in contact with any of the electrical equipment or fittings; this helps in preventing shock in these areas.

It’s important that there be proper grounding as lack of it can result in power loss or a fire. Aside from this, if you require any additional outlets, your electrician will be able to install those for you as well. Installing additional outlets requires replacing a segment of the wiring and cutting into the walls, and this is something you should never do on your own. Many new electrical gadgets come with USB charging systems and you can get the local electrician to replace some of the standard ones with the USB ports, if required.

There are times when homeowners feel that the outdoor spaces on their property can do with better illumination. If you want new security or ambient lighting installations, you should just call in the electrician. He will extend the wiring to the outdoor spaces and ensure that it has the proper grounding as well. They will provide advice on which electrical fixtures would work best in an outdoor setting.

This may seem like an easy job, but it’s best to get a professional electrician to handle this for you as well. The electrician will check whether the amperage is sufficiently high to support the wattage of the new light fitting. If it is lower than that, the electrician will have to extend an additional wire from the main circuit breaker.

Aside from this, even things like fitting powerpoint covers and replacing light switches is something that only a certified and licensed electrician should handle. They will take all the necessary precautions while doing any kind of electrical work on your property.

We at Allround Electrical can provide excellent electrical upgrade and maintenance solutions. For more information, contact our friendly team at this number – 1300 169 263. Alternatively, you can also write to us at this email address.

Thanks for reading,1300 169 263

If you’re longing for a bulb that’s going to save energy and that lasts, this LED bulb replacement guide is a great place to get a feel for the type you might need. Other than finding a bulb that fits the socket, has the correct voltage, and meets wattage requirements, there’s no list of rules as to what bulb you should use in a certain fixture. This guide shows that even the same type of fixtures can require or accept different bulb types. LED replacement bulbs are available in a variety of wattages, intensities, voltages, and with different base types; they can even emit different colors of light. You have the freedom to choose a bulb that fits your needs, and there are plenty of available options.

Clicking each picture below will direct you to a page of similar bulbs. Keep in mind, this post just touches the surface of available LED bulbs. If you don’t see what you need, use our site to see hundreds of lighting options.

Track light fixtures are found in many homes and allow for aimable illumination exactly where it’s needed. These fixtures almost always contain MR11 spotlight bulbs. In addition to track lights, these bulbs are often used in recessed, pendant, display case, and desk light fixtures. MR16 and MR11 LED replacement bulbs have GU10 or GX5.3 bi-pin bases and are available in a wide variety of styles with many LED configurations.