You may not be aware, but you can have Lower Electric Bills by changing how and when you use electricity during times that the electric company considers “peak demand” or “peak usage” hours.  Electric companies have been initiating peak usage fees for some time now, essentially charging customers more to use electricity when the demand is higher.  This is usually when more people are at home and actively operating appliances, for instance, during a hot summer month when everyone’s air conditioning is running, or around dinner time when TV’s and ovens are working along with the air conditioners. This allows the electric company to make more profit and increase revenues when most people can’t help but use more electricity as a part of their daily life. Luckily, licensed Top Dallas Electrician, ElectricMan Inc. can offer a way to avoid these charges, and Lower Electric Bills by making sure that you are using the least amount of electric company power as possible during peak times.

An Indoor Generator is a unique solution that allows you to store power, either from your power grid when it is cheaper, or utilizing other renewable energy sources, and decide when you want to use it. This highly intelligent equipment allows you to program when and where you get your electricity, providing incredible independence and capabilities for Lower Electric Bills.

Take this as an example.  One local electric company uses a general rule of enforcing peak usage fees between 4pm and 8pm, so programming your system to use power stored during off peak hours at these times will allow you to stop paying these peak usage fees, and only pay the standard rate for electricity during normal usage hours.  This is a far more effective solution, since it is impractical for most home owners to change their schedule and stop using power during these times.

Once you have an Indoor Generator system in place and programmed, the system will automatically switch to your stored power during the times that you have chosen, leaving you worry free about when you are using your electricity!

For more energy saving tips on how to Lower Electric Bills,  information on an Indoor Generator for your home, or any other services provided by Top Dallas Electrician, ElectricMan Inc. visit our website at www.electricmaninc.com, or give us a call at 972-792-7270 to talk about how we can help!

MyLEDLightingGuide.com’s

Each kit measures 6.8″ L x 4.9″ W x 1.5″ H and weighs about 1.5 lbs. These lights come in 100-277 (Standard) | 347-480 (High Voltage), and can be installed in environments ranging from -30°C to +45°C. Three color temperatures are available: 4000K | 4500K | 5000K (Standard). MyLEDLightingGuide stocks 5000K, but can order in 4000K or 4500K.

These retrofit kits are specifically designed for smaller fixtures that have bulbs up to 400W. Three models are available to match the right output with your application. These lights fit well into wall packs, highbays, parking lot lights, canopy lights, low bay lights, flood lights. In fact, the only limitation is the fixture itself.

2 models make up the Large Series of LED Retrofit Kits, the 150W and 200W. These lights are powerful enough to retrofit and replace Metal Halide and High Pressure Sodium bulbs all the way to 400W-750W. These lights are designed to provide more than the normal 400W retrofit replacement kits. There are times when more light is needed, and these kits were designed to provide more light than our normal retrofit kits designed to replace 400W Metal Halide

Conclusion

Save

Save

Save

Save

Save

Are lights on your dorm room checklist? They should be.

College dorm rooms are not known for their style and charm. They serve but one purpose for the budding student – a place to study and (occasionally) sleep. Equipped with little more than a bed and a desk, an empty dorm room requires some essential supplies. I’ve put together a list of several different types of lights — some fun and some functional — that need to make it on your back-to-school checklist.

The ever-popular rear bike light from REI that will at least make you more visible when cycling across campus at night, just not nearly as awesome as synchronized LED bike tires.

Shop for Dorm Room Lights

An automatic transfer switch consists of an electrical power control device that reroutes electricity under certain power conditions. It enables the safe switching of power from one source to another. Consequently, this ensures a safe and reliable transfer of power while minimizing the risks of fire, damage, or back feeding of power to the utility lines.

An ATS ensures continuity of power to the load. However, the time between loss of power in the utility line and the time the load is connected to the alternative power source remains critical in some applications. For example, a power loss for a few seconds is unacceptable in some hospitals or with emergency equipment. In some of these installations, an intermediate power supply is utilized. These include the battery-based inverter or UPS power to fill the gap between the loss of power and connection to the generator power.

Advanced ATS devices may have the ability to detect the voltage dips characteristic of power failures and automatically start the generator before the utility power goes off completely.

Consumers need to ensure that the ATS will have adequate capacity to handle the generator power. Things to consider include the voltage rating, continuous current rating, and type of load. In addition, consider the mode of transfer, desired transfer time delay, ATS style, and more.

The four main categories of ATS devices are defined by the following transition modes.

Open-transition: The open transaction mode of operation disconnects the primary power before connecting the power from the secondary source. This break-before-make operation means a short duration when there is no connection to either of the power sources.

Fast closed-transition: The ATS is based on the make-before-break switching operation. It parallels the two supplies for about 100 milliseconds after which it disconnects one of the sources. This operation ensures that the load is never disconnected from power.

Soft closed-transition: The soft closed-transition transfer synchronizes generator power with the utility line and then transfers the load from the utility to the generator. When transferring the load back to the utility, follow a similar process.  In this case, the generator output slowly decreases until completely off.

Sub-cycle transfer: These are based on semiconductor switches and are the fastest automatic transfer switches. Upon detecting a power failure, the ATS transfers the load to the other source within the first one-quarter of the electrical cycle. This ensures no power interruption to the load. Sub-cycle ATS devices are the most complex and expensive compared to those using mechanical switches.

Since consumers may not have all the necessary technical knowledge to choose the correct application, it can be a good idea to hire a qualified electrical contractor to select the correct sizing and installation.

Jewelry doesn’t sparkle and shine on its own – the reason a gem looks radiant is because of the way it reflects light! That being said, lighting is integral to retail design in a jewelry store. You want your displays to entice customers and show off your products in all their brilliance! Hopefully, we can help. This post will lay out options for various jewelry lighting displays.

puck lights to call attention to individual pieces, as seen in the photo to the right. Puck lighting above jewelry creates beautiful silhouettes and puts a spotlight on each piece.

If you love the look of evenly illuminated in-wall shelving displays, there is a way to avoid the spotlight effect. For a more subtle glow, install light fixtures on the inside edges of your shelves. See Xenon Low Voltage Light Strip or any of our

You’re showing off your most valuable items in the counter-style showcase, so it’s important to get the lighting right. However, make sure the actual light fixtures do not become focal points.

With a glass showcase, you need to integrate the lighting so that your display will shine, and so that it’s not blocked in any way by wires or lamp heads. The best way to do this is to install thin lighting strips inside the showcase, just below where the edge of the counter is. You can see an example in the photo to the right.

Our Your window display can be the number one determinant of store traffic. Like the counter showcase, it’s ideal if the light fixtures aren’t visible at all here so that your most alluring items take center stage.

You will likely have wall space to work with on all four sides of the window display, so it wouldn’t be too difficult to align microfluorescent fixtures against the edges for even illumination.

Depending on what types of items you are featuring, you might want to incorporate some spot lighting as well. You could use an adjustable adjustable recessed lights in the ceiling above the window display.