What does CAN Bus mean?

CAN Bus means Controller Area Network Bus. This system monitors your vehicle and reports operating conditions. CAN Bus systems are commonly found in European vehicles such as BMW, Audi, Mercedes, Volkswagen, Porsche, and in many American vehicles. While most late model American vehicles have CAN Bus systems, it is always good to check with your vehicle dealer to see which system your vehicle has before purchasing electrical products.

Will CAN Bus LED Bulbs Prevent “Bulb-Out” Indication?

Each vehicle has different requirements that the CAN Bus system is looking for, but in most cases CAN Bus LED bulbs should prevent a “bulb out” indication in areas such as tail, brake, and running lights. If you use a standard LED bulb that is not a CAN Bus application, you would consistently get a “bulb out” dashboard indicator because your system can’t communicate with a standard LED bulb.

Will CAN Bus LED Bulbs Prevent Hyper-Flashing?

CAN Bus bulbs will not prevent hyper-flashing of turn signals. These bulbs are communicating with the CAN Bus system, but the relay still needs an appropriate amount of load to operate correctly. Your electrical system could require load resistors or an electronic flashing relay to stop hyper-flashing. The factory relay causes the hyper-flash when it thinks there is not a bulb working. For more information, see our blog post here.

The commercial electricity for HVAC systems accounts for about 50 percent of a building’s total energy consumption. Being one of the major energy costs in a manufacturing facility, it dominates the building’s peak electricity demand. As such, improving the system’s efficiency, in order to cut energy costs, should be every facility manager’s priority.

The energy consumption depends on the climate, comfort preferences, building design, insulation, the timing of use, the size of the HVAC system, heat generated by electrical equipment, and other site-specific factors.

Building owners and businesses can reduce their energy costs by combining several measures that increase an HVAC system’s efficiency while reducing the demand for heating and cooling.

When selecting HVAC systems, pay attention to its design and controls. Components such as motors can impact heavily on the running costs of equipment because some are usually oversized to meet peak demands. An ideal system should have more variable speed control, inverter controls, economizers, demand controlled ventilation, advanced sensors and monitoring, as well as superior diagnostics. In addition, the system should be the appropriate size; not too small or oversized.

By controlling and running the HVAC motors at speeds based on the heating or cooling needs, consumers are able to realize energy savings of between 30 and 50 percent compared to the conventional constant speed operations. Most manufacturers prefer newer algorithm-driven smart microprocessors.

These provide a refined speed control that responds to the changing load in the building. Instead of using on and off cycling, these controls adjust the system according to the actual cooling or heating needs of the facility. More functions can be added through software add-ons as opposed to costly hardware upgrades.

Some of the ways to optimize HVAC systems include the use of thermostats and control systems, locating the HVAC unit in the best place possible, and modifying the ventilation and distribution. These are discussed more fully below:

A HVAC energy audit helps in identifying the operational deficiencies, hence allowing the building manager to take the necessary measures to enhance performance. The audit is often necessary because it helps in determining the amount of energy use, maintenance and upgrade requirements.

Consumers can then reduce their energy costs by optimizing, replacing or retrofitting the HVAC system to become more energy efficient. This not only increases efficiency and reduces the amount of commercial electricity for the HVAC system, but also improves the air quality.

The lighting industry has been busy as ever this month, from the slow-climbing successes of LED adoption to the discovery of new galaxies. Have you kept up? Allow us to offer a taste…

It’s only a matter of time before LEDs make serious headway into the retrofit market. Forbes predicts that by 2021, LEDs will make up approximately half of all retrofits in a market where they currently only make up about 5%. Read more…

Cree and Home Depot recently partnered to offer more affordable LED light bulbs to consumers. Nasdaq predicts that Wal-Mart will soon follow, based on a recent announcement from GE about lowering the price of their Great Value LEDs (sold at Wal-Mart). Image via houzz.com

There is an art to proper bathroom lighting, and it involves a lot more strategy than you’d think! For one, this author adamantly believes you should not light a mirror from above because it casts unsightly shadows on your face. Read more…