Although any light will help alleviate the strain on your eyes while looking at a screen, there is a right and wrong type and location for the light to have the best effect. As mentioned earlier, bias lighting is placed behind your screen to establish a brighter field of view so that your eyes aren’t constantly trying to find a balance between light and dark. Bias lighting illuminates a room without creating glare or reflections on your screen, shining directly in your eyes, or affecting how you see contrast and colors. Other sources of light, such as ceiling lights or lamps, can do all of the above.

If light is shining onto your screen, there’s going to be a noticeable difference in how the picture appears. Colors won’t be as vivid, and the screen might be hazy. In an attempt to remedy the situation, you could adjust the brightness and contrast. However, these adjustments will decrease the life span of the bulb or LEDs in your screen. The adjustments will also result in increased energy consumption along with a higher electric bill.

Adding light behind your screen instead of in front of it will eliminate any color or contrast issues. Dark scenes or colors will look richer against a white illuminated background. The picture below demonstrates how dark colors are lost against a dark background.

howtogeek.com, “. . .  you want a bulb temperature that is as close as possible (if not identical) to the reference point used in the industry that both manufactures the screens you’re looking at as well as creates content for said screens and that’s 6500K.” He goes on to say that, “The bulbs (be they CFL or LED) inside your HDTV or monitor are calibrated to 6500K, the film and digital video shot is color corrected to have a 6500K white reference point, and the editing suites where content is edited and worked on have 6500K bias light.”

So what exactly does 6500K mean? Correlated color temperature (CRI). CRI refers to how accurately a light source reveals the true colors of objects, people, and surroundings and involves a distinct testing method with comparisons to incandescent light or daylight. A light source with a CRI close to 100 shows colors very similarly to how daylight or incandescent light shows those same colors. To get the best picture, you’ll want bias lighting with a CRI as close as possible to 100.

We carry LED strip lights that are great TV backlighting options and will help you achieve the best picture on your screen.

Our variable color temperature controller and remote. The strip also has a CRI of 91, which will show screen colors accurately. This strip can be purchased in 3.28- or 16.4-foot lengths that can be cut and connected where needed with strip light connectors.

Another great option is our 6500K LED strip with LC2 connector. It has a CRI of 79 and is available in 1.64-, 3.28-, and 16.4-foot lengths. The peel-and-stick strip can be cut and connected where needed with compatible strip light connectors.

A kit in cool white is also available and is a convenient bias lighting solution. It has a 6500K color temperature, 79 CRI, and includes everything needed for installation—power supply, dimmer, remote, connectors, etc.

The strip lights listed above have peel-and-stick adhesive backings and can be cut or ordered in lengths to fit every screen size; strips are marked with designated cut lines. If you don’t order a kit, you will need a power supply and can purchase a controller with remote for dimming.

An easy installation method is to use a continuous length of strip around the back of your screen. For a cleaner look, you can cut the strips at all four corners of your screen. If you plan on cutting your LED strip lights, you will need 4 connectors (already included with the kit). All compatible installation supplies will be listed under the accessories tab on each product page. The following instructions explain how to install LED strip lights by cutting them into sections. Note that installation methods will differ depending on the strip you choose.

1. Cut your LED strip lights into lengths that fit the back of your screen. Because we offer different lengths, you might be able to order separate strips that will fit all four sides of your screen.

RGB LED strip lights are a great way to add a pop of color to your above-ground pool. These low-voltage LED lights can be applied to the inside rim of your pool or around your pool deck. With RGB LED strip lights, you can choose from a ton of dynamic color-changing and single-color modes with adjustable brightness and speed control. They’re great for parties or late-night swims and can be easily installed. We’ve included installation instructions for our waterproof LED strip lights. Some cities require above-ground pool lighting to meet National Electrical Code (NEC) Article 680 standards, which would limit possible pool lighting installation locations. Before you purchase LED pool lights, check your city’s code requirements. We also recommend that you have a certified electrician install your lights.

1) Before ordering your LED strip lights, measure the diameter of your pool and multiply by 3.14 to find its circumference; this number indicates the total length of strip that you will need. The 21-foot pool used for these installation instructions has a circumference of 65.94 feet and requires 4 runs of 16-foot LED strips.

You will also need to measure the distance between where your power supply will be and both sides of your pool where the amplifiers will be installed (see the setup and wiring illustration below). These distances will tell you how much 18-gauge wire you’ll need for connecting the amplifiers to power. Make sure to account for the distance of any dips or turns that the wires may take along their paths.

Lastly, measure the approximate distance that will be between your controller and where your strip lights begin. This distance will tell you how much 22-gauge wire you’ll need for connecting the controller to your strips. You will also need two small sections of this wire for connecting your first and second strip lights to the amplifiers.

2) Before you’re ready to install your LED strip lights, be sure to drain your pool. Begin by creating or locating a dry area away from your pool for the power supply. The power supply should be contained in a weatherproof box. Power supplies should be installed between a ground fault circuit interrupter (GFCI) protected circuit and the pool’s junction box. It’s crucial to use a GFCI protected circuit as it shuts off if current flows where it’s not supposed to.

Wire the included plug to the power supply, but do not connect to power until the installation is complete.

3) Connect your RGB LED controller to the power supply. Cut the barrel off of the controller wiring. Strip back the remaining wires, and connect its wires to the power supply.

4) Cut the LC2 connector off of the remaining end of the controller, and strip back the wires. Run 22-gauge four-conductor wire to connect the controller to your low-voltage pool lights; use dolphin connectors to join like-colored wires. Connect your first two LED strip lights to the controller by joining each set of like-colored wire with a dolphin connector. You should be connecting four wires of each color (red, blue, green, and black) together. For added protection, cover all wire connections in this installation with electrical tape.

5) You will apply strip 1 clockwise around your pool rim and strip 2 counterclockwise. If you have a flat surface, use mounting clips to secure the strips in place as you go. If you want to mount the strips under your pool rim, drill small holes in the trusses approximately every 2 feet. Use cable ties to anchor the strip to the truss. You can also use speed nuts or cotter pins for strip anchoring to avoid drilling holes.

Solder a small section of 22-gauge four-conductor wire onto the strip’s end terminals. To reseal the LED pool light strip, slide wires through the holes of a 10-mm end cap, fill the cap with silicone, and slide it into place on the end of the strip. Be sure to cover all of the exposed conductive traces to ensure water resistance. Allow a minimum of two to three hours for the sealant to cure.

7) Once the new end wires are attached to the strip, you will mount the amplifier. Use the double-sided 3M foam pad to mount the amplifier in the middle of strip 1 and strip 3. For best results and added security, apply 3M adhesion promoter to the amplifier and its installation location on the pool wall.

8) Using a dolphin connector, join each like-colored wire on strip 1 to the same color on one end of the amplifier. Do the same when connecting strip 3 to the other side of the amplifier. You should be connecting three wires in each color (red, blue, and green) together on each side of the amplifier. The black strip wire will be joined with white amplifier wire. Note that the separate group of just black and red wires are meant to be connected to the power supply. Follow the same instructions for connecting strips 2 and 4 to the amplifier on the other side of the pool.

9) Use 18-gauge wire and dolphin connectors to connect the amplifiers to your power supply.

10) Plug the power supply’s attached cord into an outlet, and enjoy your LED pool lighting system! Refill your pool with water, but make sure to leave space between the water line and the lights.

For more LED pool lighting options, see our entire selection of waterproof color-changing LED strip lights.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

When you think about your personal pool or hot tub, what comes to mind? Probably parties, relaxing evenings, or family fun, right? Electrical shock, property loss, and other dangers are probably the furthest from your mind, and that’s how it should be! That is, if you’re sure the wiring for your pool and or hot tub are in perfect working order.

The holiday season is a magical time, when everyone’s spirits lift and goodwill is shown to all. This buoyant mood is magnified by the sparkling Christmas lights we use to decorate our homes and with it comes the rise in energy use as a result.

Don’t let rising energy costs prevent you from decking your home in the finest lighting fashions of the season. Instead, follow these tips to reduce energy use during the holidays.

LED lights are highly energy efficient. Compared to a string of traditional holiday lights, a string with Energy Star LED bulbs uses up to 90 percent less electricity, and the light LEDs produce is just as bright.

Another advantage is that LEDs won’t burn out. Due to their high durability, you won’t spend the first hour of stringing lights hunting down and replacing burned-out bulbs. Using these lights indoors, you won’t have to worry as much about fire hazards because they run much cooler than incandescent bulbs.

LEDs not only save energy, they come in a marvelous array of twinkling, fading light effects to make your holiday display sparkle. Traditional light strings have given way to LED ropes, spotlights, and even laser light shows.

There’s no need to light your display when no one can appreciate it. Instead of burning the lights all day and night, just turn them on when it’s dark and the neighborhood is busy. This way, everyone enjoys the display and you save energy.

By automatically controlling your lights, your energy savings can be even higher. Instead of relying on your memory to turn the lights on and off, use an automation system, such as HomeWorks from Lutron, to do it for you. Such a system offers benefits beyond turning lights on and off; it can improve lighting use throughout your home and provide added exterior security.

Even a modest display of holiday lights can consume a lot of energy. You may choose to only light your Christmas tree, but you can do it economically. However, because of the latest advances in energy-saving lights, you don’t have to limit yourself to a few lights on a tree.

Hang strings of LED sparklers from the eaves, trim the evergreen in the front yard, and install a few lighted reindeer or a Santa Claus on the lawn. Get into the holiday spirit without breaking the bank and contact Bryant Electric Service today for your lighting needs.