If you’re in the midst of a renovation or simply rearranging your floor plan, then you’ve likely come across the need to add or relocate a light fixture. Maybe your new dining room table is a little wider than the old one, you’re adding a kitchen island with pendant lights, or you’ve finally convinced your significant other to let you get that pool table you’ve always wanted. In any case, you need to move or add a light fixture – but how and when?

First, it should be noted that, contrary to how it may seem, most light fixtures are not connected to a joist or even drilled into wood. Instead, hanging light fixtures and ceiling lights alike are located between joists and supported by electrical boxes that grip a wide surface area of the sheetrock that makes up your ceiling to support the weight of the fixture below; for heavier fixtures, like large chandeliers or ceiling fans, there are larger, even joist-secured boxes that will need to be used.

If you’re moving a light fixture, it is important to note that there are certain limitations as to where the fixture itself can go. If you wish to relocate the fixture to a place where a joist exists just above, then you’re likely going to have to use a swag hook and chain to anchor the fixture in place, as a box under a joist is not an option. That said, if you’re moving the housing for the fixture itself, you’ll need to know which direction the joists above run, then choose to move it either through the same joist cavity or drill through a joist to run the current wiring to the new housing. Other things to consider include which switch controls the light and where it is located, as it is a safe bet that a wire will have already crossed all joists above (at some point). This can prevent your electrician from drilling needlessly by allowing them to fish the wire back to the earlier point. If your switch is further away than the destination, you can bet they’ll have to do some drilling. Jumping through, between, and around the joists in the ceiling represents the largest obstacle your electrician (and light fixture) will face.

Once your location is set, all that is left is to get your electrician out to assess and perform the work for moving your box. If you’re planning on doing one large fixture over a pool table, island, or entire room, then you’ll want to take into account the power output of the fixture compared to what that circuit can safely allow for as well as the weight of the fixture. A typical rule of thumb is that anything under about 35 pounds can be handled by a standard drywall box, but something more (or with a fan) will need extra stabilization. Surprisingly, if you’re running numerous small pendant lights, the electrician may have an even easier time running the circuit and ensuring that your lights are up and running in no time. Just be sure to discuss the fixtures you have in mind with your electrician before you purchase them to know what they believe your limitations are!

Whenever you need electrical work done around your Des Moines home, contact the experienced professionals at Electrical Gurus. We are proud to offer the finest licensed local electricians in the area and are always more than happy to help out on your household projects.

While you’re gathering information to find the right electrician in Burbank CA, pay attention to how the electrician acts and makes you feel. If you meet with the electrician, keep your eyes open, too.

Do you like the Burbank electrician?

Do you feel comfortable and not under pressure?

Does the electrician inspire your trust?

Do the electrician and company employees seem to know what they’re doing?

Do they seem to operate legally and behave ethically? Are they acting the way that you would want them to act towards you?

Do they return phone calls promptly?

Are they timely when meeting you for appointments?

Do they listen to your questions and concerns and answer them in a way that is forthcoming and that you can understand?

Does the electrician dress neatly and have a vehicle and tools that look well-maintained?

Electricians who are bidding jobs are on their best behavior. If you already notice that an electrician treats you or others in ways that concern you, better to find another with whom you feel more comfortable.

Check It Out

If you haven’t already, check customer reviews. The first section of this article gives details.

Enter the Contractor’s License Number into the Contractor’s License Board website for your state. See if there are any “black marks.”

Check the company’s rating at the Better Business Bureau. Ratings run from A+ to F based on customer complaints made to the Bureau. As a note, an “A” reflects the same level of customer satisfaction as an “A+.” The “A+” is earned by an “A” contractor becoming a paying member of the Better Business Bureau, which supports the Bureau in its work.

Call References

Don’t hesitate to call references. Customers are usually happy to give a good recommendation to help a deserving electrical contractor. You can return the favor later should a homeowner call you. Ask:

How did your job go?

Was your job done right the first time?

If a return visit was needed, was the electrician easy to work with and prompt?

Was company pricing competitive?

Was the electrician within budget and schedule?

Would you be happy to continue to use this electrical company?

Speak with at least three references. Listen carefully for enthusiasm or lack of enthusiasm about the electrician. Clients, past or present, may not feel comfortable saying anything negative. If they express little enthusiasm or say something negative, take this into consideration when making your decision.

A Final Tip: Don’t Automatically Choose the Low Bid

A bid may be too low. How can that be? An electrician may intentionally omit items that the job requires, only to come back later saying that additional work needs to be done. On the other hand, some electricians may unintentionally bid low through inexperience. Either way, the electrician may ask for more money to finish the job or may leave you with an incomplete project.

Price is important, but judge the entire picture an electrician is showing you — character, expertise, the ease of working with him or her, and overall value. A large part of an electrician’s value is that he/she gets the job done right and safely without taking too much of your time and inconveniencing you. A very competent electrician can save you money by suggesting more efficient ways to do a job or to save on electricity. When you enjoy a good relationship with your Burbank electrician, it can save you both time and money.