Kauai’s electrical grid surges affect the life span of our computers, appliances, and other electronic equipment. Power surges can also completely roast the internal electronic parts during a storm or utility fault.

A whole house surge protector installed by a licensed electrician will greatly decrease the risk of power surge destruction.

Blue Sky Electric offers a quality whole panel surge protector for your home or business (parts and labor)

Guarding against surges requires a two-pronged approach: a whole-house suppressor to tame the big, dangerous power spikes and an individual circuit (or “plug-in”) surge suppressor for vulnerable appliances and electronic devices. Both types essentially act like pressure-relief valves. Normally they just sit there, allowing electric current to flow through them. But with higher-than-normal voltage, the devices instantly divert excess voltage to the ground wire. (The best ones react in less than a nanosecond.) As soon as voltage levels return to normal, the flow of electricity is restored, unless the surge was big enough to melt the fuse built into some units.

Typically, whole-house suppressors are hard-wired to the service panel, a process that takes a licensed electrician about two hours. Whole-house systems should be rated to stop a 40,000-amp surge, at minimum. Features to look for include thermal fuses, and lights or alarms that indicate when a device has taken a hit. Protection for an average house with 200-amp service will run about $500 — including a couple of hours of an electrician’s labor. Separate but smaller whole-house units are recommended for the phone and cable lines. These protect fax and answering machines, televisions, and modems.

By themselves, whole-house suppressors can’t stop surges completely; up to 15 percent of excess voltage may leak by. That’s where “plug-in” surge protectors come in. These buffers between individual appliances and wall outlets come in a bewildering array of options and prices. They range from $70 units not much bigger than a computer mouse to $350 units the size of a pizza box that guard all the components in a home theater. But most plug-in models fall into three basic categories: the familiar multi-outlet power strip; the multitasking surge station that can handle phone and cable jacks as well as power cords; and the UPS (uninterruptible power supply), which completely cleanses electric power of random fluctuations and provides a short-term battery backup in case the power dips or goes out entirely. Expect to pay between $20 and $70 for a quality power strip or surge station, and from $100 to $250 for a UPS.

If you are in the mood for a little spring cleaning or home improvement, you are likely looking around your home and thinking you could use some new lights. Lighting can make or break a room. Dark, dingy lighting can make a room look small or even outdated despite new furniture or a nice coat of paint on the walls. An electrician in Los Angeles can help give your room a facelift. You can count on The Electric Connection to provide you with a knowledgeable electrician who has the experience needed to make it happen.

Your dining room, kitchen or even your bathroom will be transformed with the installation of a new light fixture. It is amazing to see how different a room can look with just the right lighting. Your kitchen should be bright and inviting. Bright areas are ideal when you are working with sharp knives and need to see ingredients as well as read labels. There are plenty of options when it comes to enhancing your kitchen workspace. Track lighting is an ideal option.

Because electricity is involved, it is best to leave the Los Angeles electrical work to a professional. It isn’t a good idea to try and wire in a new light fixture if you are not trained for it. Not only do you risk your life, but you risk the safety of your home. A fixture that isn’t wired correctly may work initially, but overtime, it can be a serious fire hazard.

While you are thinking about upgrading your lighting, take a look at your living room as well. You can use track lighting or the more popular recessed lighting. This is an ideal option for the newest trend of mounting flat screen televisions to the wall. This insures your view will not be obstructed by a hanging lamp. If you would like to get started on your spring improvement plan, give The Electric Connection a call today.

Love is in the air! Fall officially began last week, so we are in the throes of the autumn wedding season. Although the summer months have traditionally been the most popular for weddings, autumn weddings have steadily risen in popularity and nowadays, you’re just as likely to receive an orange maple leaf save-the-date as you are a frilly invite with a flower border.

But as we all (should have) learned in elementary school, when the seasons change, the angle of sunlight touching the earth changes as well, resulting in a different quality and duration of sunlight. While many people prefer the more “golden” tones of autumn afternoons (especially photographers!), it can certainly be challenging to keep your special day well-lit when the sun begins to set. But never fear! Here is a list of four ways lighting can save the day on your big day.

If you can, hire a lighting designer for your wedding. Great lighting can be the difference between a spectacular party and a “well, they tried hard.” Acclaimed lighting designer Extreme Productions) how glamorous professional wedding lighting can be. If you can afford to go all out, you won’t be sorry.

The reason lighting at a wedding is so important is it can really make or break a venue’s ambiance. Whether you want a romantic vibe, like in the picture, or more of a warm, casual family feel, lighting can make a huge difference on how successful you are in achieving the aura you desire. You will want to look into professional lighting design, especially if your wedding takes place outside. Many venues have pre-approved lighting designers familiar with their codes, so make sure to find out when venue-hunting.

But if hiring a lighting designer is these awesome DIY wedding lighting tips from the blog at Wedding Window.

It’s incredibly easy to forget about “minor details” like lighting while planning your wedding, but you can go nuts trying to come up with last-minute lighting solutions. Since lighting has such a big impact every part of the wedding, make it a priority!

3. Make a list early on of things that need to be well-lit, and plan accordingly.

Do you want your new monogram spotlighted on the wall at your reception? Or pinhole light above your wedding cake or centerpieces? Maybe fun, moving lights for the ceiling above the dance floor?

Research some of the lighting elements that have worked well at past weddings and make a list of everything you want at yours. It’s okay if you have to scrap some of your ideas, but the process of writing it out will help you make sure you don’t miss anything you’ll regret later.

If you’re doing your own lighting, this step is crucial to planning for what kinds of lights you want where, and what crafting you need to finish beforehand. Taking the time to plan ahead will save you all kinds of trouble at game time.

4. Crappy venues can’t defeat you!

Today, most property owners look for ways and means to make their properties more energy-efficient. It’s why people insulate their homes using the latest materials, are choosing appliances with a high WELS rating and opt for green building materials when they are constructing their homes. One more effective way to improve the energy efficiency of your home or commercial establishment is to opt for LED lighting systems.

Many people avoid replacing their older CFL bulbs with energy-efficient LED bulbs because they feel the latter are too expensive. While it’s true that the up-front cost of LED bulbs is 5-6 times higher than standard bulbs, the cost factors can’t be looked at in isolation. Here are some other facts that will help you make a more well-informed choice about the type of lighting to use.

Unlike conventional bulbs, LEDs don’t have any filament that can burn out and they emit a very cool light which goes a long way in reducing residential and commercial air- conditioning bills. These bulbs get illuminated when the electrons move through a semi-conductor and release visible light.

Though the initial costs of LED lights are higher than other conventional types of lighting, you end up saving a significant amount of money in the long term. Regardless of whether you need commercial or residential LED lighting, transitioning to LED light bulbs is a smart choice. Today, a large number of homeowners and commercial establishments are switching to LED lighting.

Many people wonder whether LED bulbs are able to provide as much illumination as incandescent bulbs or CFL bulbs do. In order to understand this, it’s important to understand a little more about how the light intensity of a bulb is measured. Lumen (a measure of the light intensity) is the simplest (though not perfect) measure of lighting efficiency that any lighting sources produce for every watt.

A traditional incandescent bulb provides 13 lumens per watt to light a room. A fluorescent globe provides around 60 lumens per watt. In comparison, an LED bulb provides 80 lumens per watt. As you can see, even when it comes to illumination, LED bulbs stand a head above the rest of the lighting options.

Apart from the illumination and energy-efficiency factors, there are some other distinct advantages to using LEDs on your commercial or residential property.

The need of the hour is for energy-efficient alternatives and LED lighting is a revolution in lighting. No matter which way you look at it, you stand to benefit from switching to LED lighting. For any more information about LED lighting and for any type of commercial or residential electrical jobs, call Allround Electrical’s friendly team today at this number – 1300 169 263. You can also write to us at this email address or by filling out this contact form.

Thanks for reading,1300 169 263