Since 1989 approximately 1 billion feet of CSST gas line or yellow gas line has been installed.  Nearby lighting strikes can cause an electrical surge and puncture the CSST line.  Bonding is considered electrical work and should only be performed by a qualified electrician.

In new construction we bond all gas lines.  Currently about 500,000 new homes per year have CSST gas line installed in them.  However, CSST gas line is considered safe when properly installed in your home.  Part of the installed properly guidelines refers to bonding your CSST gas line, your local electrician can do this for you.  If your home is more than two years old we recommended you have a licensed electrician check for proper gas line bonding.  Many real estate transactions and inspections require the CSST line to be bonded prior to the sale.   A good source of information on CSST lines can be found at CSSTSafety.com.

“CSST should NOT be confused with flexible gas appliance connectors – the product that joins a moveable appliance to your home or building’s gas supply line. The difference is flexible connectors attach directly to the moveable appliance from the wall or floor. CSST is usually routed beneath, through and alongside floor joists in your basement, inside interior wall cavities and on top of ceiling joists in attic spaces.” CSST Safety.com

If you would like more information or to check to see if your CSST line is properly bonded please feel free to Contact us anytime!  We bond CSST gas lines in the Des Moines area and surrounding communities.

LED cove lighting is a great way to add accent lighting or color to any room, and LED strip lights are the perfect product for the job. LED strip lights can be used for any type of RGB LED strip lights, you can choose from a ton of dynamic color-changing and single-color modes with adjustable brightness and speed control. variable color temperature strips are also available and can be used with a compatible controller and remote. Installing LED cove lighting is easy, and we’ve provided basic instructions for a standard L cove, recessed ceiling/tray ceiling cove, or crown molding cove in a 16-by-16-foot room. We recommend that you have a certified electrician wire your strip lights to power.

Tools and Optional Materials:

The way you install the strips or even the number of strips used might vary depending on the room size or the style, shape, and size of your cove. The steps and materials needed for this particular installation could be used in a room with a standard L cove, crown molding cove, or recessed ceiling/tray ceiling cove. The photos below show several different cove types.

DIY “L” Cove

Valence Cove

Crown Molding Cove

8) If desired, use a double-sided 3M foam pad to mount the amplifier in the middle of strips 1 and 3. Cut the foam pad, and use it for both amplifiers.

9) Repeat steps 6-8 for strips 2 and 4.

10) If you are experienced, connect your power supply to power. Otherwise, hire a certified electrician to set up power for your new LED cove lighting.

In general, you don’t want anything in your home’s electrical system to create sparks. It’s usually a major warning sign that the system requires repairs. You should immediately stop using the sparking appliance and call for professional electricians.

However, sparks from outlets are something that homeowners often ignore. Its commonplace for a slight blue spark to appear when you plug an electrical appliance, like a vacuum cleaner or a toaster into a wall outlet: this is a visible effect from the start of the flow of electrons. However, larger sparks might begin to occur. When this happens, you need to call for professional electrical repairs as soon as possible. Under no circumstances should you attempt to open up the outlet cover and investigate the sparking on your own—this is potentially very hazardous.

There are a number of possible causes for an outlet to develop the dangerous sparking that might lead to electrical fires. One of the common reasons is that the outlet has overheated and melted the insulation around the wires. (This is why you should never use an octopus plug to connect too many appliances into a single outlet at the same time; it’s easy for the outlet to overheat.) When the wires are exposed because of melted insulation, it can cause electrons to leap from the wire to the metal case or even the opposite wire. This is known as a short circuit. Short circuits are potentially very dangerous as sources of electrical fires. Most of the time, a short will cause the circuit breaker panel to trip and cut off the circuit to prevent further damage. Frequently tripped breakers are a major warning sign that your have trouble with an outlet.

However, if there are other problems with the wiring your home, a short circuit in an outlet could start a fire behind the walls. If you ignore major sparking from an outlet, this is one of the risks that you’ll take.

Fortunately, professional electricians are experienced with fixing and replacing faulty outlets to prevent the dangers of short circuits. You should watch out not only for sparking from outlets, but also outlets that feel hot to the touch or show signs of discoloration and charring on their surface. An outlet that continually trips circuit breakers also needs an electrician to investigate it.

/foot)

Strips with more LEDs per foot will consume more power.

In short, if maximum energy efficiency is what’s most important to you, choose a light strip with smaller LEDs and fewer LEDs.

In order to ensure your LED power supply doesn’t overheat and fail prematurely, we use this general rule of thumb:

Make sure the total wattage of your LED strip lighting is at least 20 percent less than the power supply’s rated wattage.

For example, if you have an LED strip light that requires 80 watts of power to run, you’ll need a power supply that’s rated for at least 96 watts.

The vast majority of our strips include wattage per foot right on their product pages.

power supplies range from six watts to 1,500 watts for compatibility with a wide variety of LED strip lights.

Let’s take a look at an example:

It’s important to verify that the voltage of the power supply you choose is compatible with the voltage of your LED strip lighting. Also, be sure that the power supply’s input voltage matches that of the location it will be installed in. If you have an LED strip with 12-volt DC operation that you wish to use in a 120-volt AC home wiring system, you’ll need a power supply that includes 120 volts in its input range and has 12-volt DC output.

Another factor to take into account for longer runs is voltage drop. A significant voltage drop is present after a certain distance of LED strip. After this distance, there will not be enough voltage present to light the next length of strip. This varies depending on the type of strip and length being used. Usually, a single-density strip (nine or less LEDs per foot) will need to run back to a power source every 32 13/16 feet (10 meters). A high-density strip (18 or more LEDs per foot) will need to run back to a power source every 16 3/8 feet (5 meters). Please refer to “Max Run” in the specifications table of the strip light to determine how many can be run continuously without a parallel run back to power.

3) the 4) if you want your strip to be dimmable

power supply calculator on the product pages of all of our LED strip lights!

There are a few steps involved:

Step 1: Select your strip and the length you need.

Step 3: Click the green “Power Supply Calculator” tab, and select your product by choosing it from the list OR by pasting the exact part number in the search bar.

Step 4: Enter the number of strips at the desired length you’ve selected and voila! You’ll see a list of all compatible power supplies with the best match at the top of the list!

When dealing with electronics, safety is paramount, and you want everything to work like it’s supposed to. So if you’re still not sure which power supply to use for your LED strip lighting project, just reach out to our technical support team or customer service department at 866-590-3533. Our teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.