A good number of the calls I get during an average day at work fall into two categories;   customers who call to have something installed in their electrical system, and customers who tried to install it themselves and are calling me to come and fix the mistakes they made.  There’s certainly nothing wrong with trying to perform basic electrical work yourself if you have a good grasp on proper electrical safety techniques and what you’re doing.  On the other hand, there’s nothing wrong with calling a top Dallas electrician to do the work for you either.  The best way to ensure the job is done right every time is to hire an honest, hardworking professional electrician who’ll stand behind his work.

Even tasks that can seem quite simple can be treacherous if you’re not sure what you’re doing.  This comes into play a lot when a homeowner is trying to perform a three-way switch installation.  It seems a lot easier to install than it really is; I generally recommend homeowners not attempt to install three-way switches without at least a electrician on the phone to walk you through the process.  Keep the following in mind:

There are tasks well suited for the do-it-yourself minded homeowner, though.  The easiest is wall outlet replacement, which is usually a very simple, straightforward procedure.   That doesn’t mean the haystack isn’t free of the odd needle that you can hurt yourself on, though.  Here are some of the more common problems I run into, along with some typical solutions or hints to keep them from happening to you: 

Insect Vision: Ultraviolet, Color, and LED Light, Marianne Shockley Cruz and Rebecca Lindner from the University of Georgia’s Department of Entomology write, “Experimental work supports the idea that color perception exists in insects and that they are especially responsive to the shorter wavelengths of the visible spectrum and UV light.” Wavelengths are measured in nanometers, and shorter wavelengths of light (less than 550 nanometers) can indicate ultraviolet (UV), blue, or green colors. Cruz and Lindner also cite work that confirms the correlation between UV light from the sun and moon and how certain bugs navigate Earth. Another point to remember about bugs is that certain types, such as mosquitoes, are attracted to heat and have thermal receptors to help them find it. All of this information is helpful for determining why bugs flock to certain light sources.

The color that is emitted from a light source is important because of its ability to attract bugs. As previously stated, shorter wavelengths (UV, blue, and green light) are more visible to bugs than longer wavelengths (yellow, orange, and red light) and, therefore, will draw them closer. Incandescent, compact fluorescent (CFL), halogen, and high-intensity discharge (HID) lights emit UV radiation that is attractive to bugs, and since certain types of bugs navigate by UV light from the sun and moon, a closer, brighter source of UV light can disrupt their orientation and draw them in. LEDs produce very little to no UV light, which makes them less visible to bugs. However, it is still possible for an LED bulb to produce shorter wavelengths of light (bluish-white/cool white color), which will be more attractive to bugs. Therefore, when browsing for LED lights that will attract less bugs, it’s important to choose a fixture that emits more wavelengths that are above 550 nanometers, such as warm white, ultra warm white, or yellow lights.

CCT) instead of nanometers, it’s easy to tell if the bulb will be more or less visible to bugs. CCT is measured in Kelvin (K), and different temperatures on the Kelvin scale represent different colors. An LED bulb with a CCT below 3600K will emit warm or ultra warm white light that’s not easily seen by bugs. Bulbs with CCTs of 3600K and above will emit natural or cool white light that is more likely to attract bugs.

Incandescent, halogen, CFL, and HID bulbs waste most of the energy they consume—as much as 90 percent—in the form of heat. Bugs with thermal receptors can sense the heat released by these light sources. LED bulbs produce a minuscule amount of heat, which makes them less appealing to bugs.

Bug lights are simply light bulbs with a yellow coating that decreases the color temperature of emitted light. Because of the coating, bulbs will emit a peak wavelength of light that is around 550-600 nanometers. However, you don’t need a yellow-coated bulb to reduce the presence of bugs. LED lights that emit warm-colored illumination, such as yellow malibu light bulbs for landscape applications, or From top left to bottom right: incandescent bug light, yellow LED strip lights, yellow LED malibu light bulb installed in landscape fixture, and gold-tint LED filament bulbs

Ecologist Michael Justice performed an experiment to determine the type of residential light that attracts the least amount of bugs. He used six lighting types inside of an insect trap each night during the summer. Justice also made efforts to equalize the effects of weather and the moon’s irradiance. His LED Z-Bug Bulb™ from NEBO is a bug zapper and an LED bulb in one. The bulb emits white illumination from its top and ultraviolet (UV) light from its caged center. The UV light attracts mosquitoes and other insects toward the bulb’s high-voltage electric grid and kills them on contact.

Because different types of bugs see different wavelengths, it is never guaranteed that an LED light won’t attract them. However, most bugs are attracted to short wavelengths of light and are especially drawn to UV light; they can see it better, and some use it for navigation. Bulbs that emit more short wavelengths of light (cool white/bluish color) will attract more bugs. Lights that emit a majority of longer wavelengths (yellow/orange/red colors) are less visible. Heat can also draw bugs into an area. LED lights produce little to no UV light and a minuscule amount heat, which makes them less attractive to bugs—so long as they emit longer wavelengths of light.

A Programmable Logic Controller (PLC) receives information from one or more inputs. This semiconductor control device processes the information based on a software program. Finally, it sends an output control signal. The microprocessor based control system performs functions such as timing, logic, sequencing and others. The PLC follows instructions from an operator-defined program.

These intelligent systems provide reliable, high-speed monitoring and control of processes in automated applications. In addition, they are easy to program and configure.

Once the program updates the output, the CPU starts over and the cycle repeats again. The cycle depends on the number of inputs, outputs, and size of the program, while the action will depend on the inputs coming from a variety of sensors.

The input sensors include components such as switches, proximity sensors, photoelectric sensors, pressure switches, level switches, encoders and temperature sensors, while the output devices include actuators, relays, switches, and many more.

PLCs rely on software programs that help them in making the necessary decisions. The PLCs are programmed through a variety of tools, which may differ in ease of use, appearance, and complexity. The most commonly used PLC programming language is Ladder Logic, a graphical software that uses common electrical symbols. Other languages include Function Block Diagram (FBD), Sequential Function Chart (SFC) and Structured Text (ST).

The programming is done on the device such as a computer or handheld device after which it is transferred to the PLC memory using a communication interface.

Selecting a suitable PLC that will address your current and future needs can be a challenge, especially with the large number of different PLCs on the market today. The available PLCs have varying capabilities, physical sizes, complexity, cost, power requirements, scalability and other parameters. Therefore, it is necessary to determine the correct programmable logic controller for your specific application. Special systems can be designed for use in harsh environments.

The Programmable Logic Controller has revolutionized and simplified controls in automation and industrial applications. PLCs are easy to install, wire, program and modify to suit changing application requirements. These control systems are usually available in a wide range of sizes that ensure finding exactly what you need for any application.