A common concern for those involved in home renovations or purchasing a new home is, “What is the state of the electrical system in the walls”. Some homes may not have had construction or renovations done since the original – this means the original wiring is still in place. Having original wiring in place can be concerning, especially if it is aluminum wiring. This type of wiring is commonly found in older homes and can be very dangerous. Read on to find out what you need to know about aluminum wiring and the dangers associated with it.

In the 1950’s to 1970’s, many homes were being outfitted with aluminum wiring. The reason for this was because the prices of copper (material normally used for electrical wires) had increased and the use of aluminum would undercut the high costs. Aluminum is also much more conductive than copper and was used in larger industrial/commercial electrical lines like power grids and airplanes.

Despite the reduced cost and increased conductivity, aluminum wiring has many potential issues. Aluminum wiring is much softer than standard copper wiring. This means that it is vulnerable to being broken, cut, and damaged which can leave live electrical wires exposed. Another issue is that when aluminum rusts, it is not as conductive as copper. Copper that rusts can remain conductive and continue its flow of power. However with aluminum wiring, rust in wiring will impede the flow of electricity and can cause a number of other issues. Aluminum also expands and contracts when it becomes hot. This constant flux in size will result in the wires loosening themselves and connections become loose. For all of the above listed reasons, aluminum is prone to overheating and electrical fires.

If you are unsure if there is aluminum wiring in your home, we have listed a number of warning signs that can indicate a hidden problem

With all of the information circulating around about renewable energy sources, it can be hard to keep everything straight. One of the most common sources of renewable energy actually comes from the sun, and is harvested with solar panels. The most common solar panel converts raw sunlight into electricity through the use of photovoltaic cells. These solar panels can be found in fields dedicated to their use. One of the most attractive things about solar panels, however, is that they can be installed directly onto your home by an electrician in Pasadena CA. This is becoming more and more common, as people are looking for ways to be more environmentally friendly, self-sustainable and reduce their monthly electric bills.

Installing and Using Solar Panels

There are two different ways to connect solar panels to your home. You can either connect them to a battery array that will store the power for you, or hook them directly into the existing electrical grid. Both methods have their pros and cons, which you can discuss with an electrician Pasadena, such as The Electric Connection.

One of the great things about having your own energy storage array is that you have reserve power if there is an outage. An electrician Pasadena CA who specializes in solar panel upgrades will place a panel in the optimal position on their home. They will then connect the panel to a voltage controller, which helps to control the flow of electricity into the batteries. The battery array is then plugged into a power inverter that converts the electricity from DC current to AC current, so that it can be used in your home. This type of installation is typically used to power just a handful of essential appliances, lights etc. In the case of a power outage, you will have a few hours of electricity by smartly using the battery array to power your home lighting, and essential electrical circuits.

The method of installation that is the easiest for the end user to understand and use is by hooking the solar panel directly into the main power grid. The Electric Connection, or the electrician in Pasadena that you have assisting you with your installation can actually connect your solar panel up so that it will feed the electricity back to the utilities company, rather than just to your home. This can work in one of two ways. Either you send everything you generate back to the electrical company, or you send anything in excess of what your battery array can handle back to the electric company. In either case, you receive credit for the energy you send, which can in turn lower your electric bills dramatically. This installation is slightly more involved, but only requires a minimal amount of home rewiring and/or electrical panel upgrade.

Regardless of the type of installation that you choose, adding a solar panel to your home is a great investment. Not only will you benefit from the peace of mind that you are using fewer fossil fuels to power your home, but you can even receive credit back for any excess energy that you create. To sweeten the deal, there are many state and national grants and tax credits that have been designed to assist people investing in renewable energy sources. Because of these tax credits, much of the cost of installation will come back to you on your tax returns. In just a few years, the majority of all solar panel installations will pay for themselves. If you are truly looking to increase your energy independence, and are interested in renewable energy sources, contact your Pasadena electrician today to talk about solar power.

Click here to read more.

More than 47,000 house fires in the U.S. are caused by faulty electrical work and wiring each year. Modern living has placed many more demands on the average home’s electrical system than were ever imagined just a few short decades ago. Computer systems, gaming systems, large appliances, and smart systems all draw a lot of electricity and can easily overload a circuit that wasn’t designed for that kind of demand. However, increased electrical demand is just one of several reasons to update your home’s electrical system.

1. Your home is more than 30 years old. Your home doesn’t have to be a century home to have outdated wiring. If it was built before 1985, it’s a good idea to have your old electrical wiring evaluated by a licensed electrical contractor.

2. You frequently trip the breaker or blow the fuse. If you frequently have to reset the circuit breakers in your main electrical control box or replace the fuses, it’s likely a sign that at least one of your electrical circuits cannot handle the demand for power.

3. You need extension cords. If you need extension cords to plug in a desk lamp or (worse) your electronics, you probably don’t have enough wall outlets in your rooms. Older homes often only have one or two outlets per room, less than is needed by most households.

4. Your lights dim or flicker when an appliance turns on. If the lights in your room dim when the furnace kicks in or the refrigerator cycles, this can also be a sign that your old electrical wiring may not be able to safely power your home.

5. Your outlets are discolored. Discolored outlets can also be an indication of unsafe surges in power.

Leaving old electrical wiring in place can be dangerous for you and your family. If you have encountered any of the above situations, it’s a good idea to have an experienced electrical contractor evaluate your home’s wiring.

Kolb Electric has been helping Maryland, Virginia, and Washington, DC homeowners with all their electrical needs for 90+ years. We have a full staff of licensed electricians with experience on major projects like home rewiring.

Call us at 877 287-1179 to schedule an appointment today.