Museums have a hard line to walk, exhibiting items for public education and enjoyment while protecting those same collections from damage. Today’s museum also carry the additional weight of safeguarding the future of the environment – as well as their financial future – against the dangers of unnecessary energy consumption. What advancements have been made in preservation lighting technology to help accomplish these goals?

Light, including all three types: ultraviolet (UV), infrared, and visible light, causes permanent and irreversible damage to museum pieces. Cumulative and dependent on the intensity and duration of exposure, light affects chemical composition, physical structure, and, the appearance of a collection. There is no conservation treatment that can repair it. Light damage is forever.

Only complete darkness ensures conservation, since exposure to light in any form naturally breaks down items. However, keeping pieces locked away in the dark defeats the mission of the museum – sharing those works with the public. It is thus a museum’s dilemma to find a suitable solution that balances the best of both worlds, in addition to considering energy costs and the environmental impact of its lighting selection.  

In your search for preservation lighting, you will find that a great deal of lighting solutions involve UV (ultraviolet light), the most energetic and destructive form of light. These include natural light, fluorescents, HID, and tungsten halogen lighting. Fortunately, the effects of UV can be controlled with simple filters, offering a greater variety of lighting options. UV filters are hard plastic tubes or soft sleeves wrapped around bulbs/light sources, which filter and block up to 98 percent of UV light, preventing its damaging effects. NOTE: UV filters lose efficiency over time and must be replaced every eight-10 years.

Specific, detailed recommendations for preservation lighting levels based on your collection type can be found from various sources, including the Library of Congress, National Park Service, UNESCO, and more.

Spirited lighting designs are trending toward the dark side, and that’s not just because it is Halloween.  Style spotters and top designers are embracing bold fashions and dramatic hues.  Take a look at the top three themes in the world of illumination…

1.  Deep, Dark Hues:  It is said to be a sign of the times that we are embracing rich, dark colors.  From politics to cultural rebirths, a positive vibe is in the air and we are changing it up with dramatic designs and darker hues.

“Momento De Mori” from Shannon Koszyk’s dramatic collection for Currey and Company features an Antique Nickel skull, black base and Inky Black parchment shade.

2.  A Cleaner Contemporary:   The ease of clean contemporary goes hand-in-hand with energy-efficiency and LED illumination.  From intricate geometric cutouts to textured Mercury glass compositions, the call for contemporary design has never been greater.

“Sovereign” table lamps from Dimond Lighting showcase Antique Mercury glass combined with energy-efficient LED illumination.

3.  Fearless Fashions and Surprise Twists:  Engaging new mediums run the gamut from natural palm leaf panels to a fusion of slate and metal.  Experimenting with hundreds of different textures, organic and synthetic materials, designers are coming up with new lamp shades, lamp bases and chandeliers that offer a magnificent blend of elements.  Novel lamp styles are making the A-list from designers who are not afraid to take a risk!

“Free Fall” from Kenroy Home introduces natural slate within a rugged iron lamp base for a statuesque presentation.

Lighting showrooms are abuzz with new lamps and chandeliers for the holiday season.  From High Point to Hong Kong, top lighting vendors are giving us plenty to celebrate.  Visit a Capitol Lighting showroom or 1800lighting.com to see the latest fixture fashions.

Then, once you install the fixture, simply run it while you’re taking a bath or shower, and for about 30 minutes afterwards. It may also help to put the fan on a timer switch so you never forget. You should have separate switches for the light and the fan so you can operate them independently.

For The Bright Bathroom

We’ve all been there. A quick midnight trip to the bathroom. You need to be able to see, but it sure would be nice if you didn’t have to jolt yourself awake with every lumen of your bathroom lighting on at full power. You can solve this problem if you nab a lighted bathroom exhaust fan with a night light setting.

2. The Orleans Bathroom Exhaust Fan

4. The Ventura Bathroom Exhaust Fan

By: Jason Lee

Halloween is over which means the holidays are officially here. That means the relatives are on their way and you’ll be using your large appliances more often causing your electric bill to look scary long after Halloween has ended. Don’t let the increase in relative visits and vampire electric devices drive up the electric bill.

To keep the electric bill down, remember to only use the dishwasher when it is full. Running the dishwasher when it is only half full will amount to a lot more energy consumption.

Items like washers and dryers are guilty of consuming more energy during the holidays too. Washing clothes in cold water and setting the dryer on low heat will help in reducing the electric bill.

Knowing when to say goodbye to your old system is another way to save on energy. Older appliances run up the electric bill. If you have an appliance that is over 10 years old, consider replacing it with a newer, energy efficient model.      

It is also a good idea to have all large household appliances connected to their own dedicated circuit. To many of these large appliances operating at the same time on the same circuit can cause a blown fuse or a tripped breaker. A dedicated circuit for each large electrical household appliance will keep this from happening.

Lastly, don’t let your everyday electrical devices like laptops, cell phones or tablets get greedy and hog the power outlets. Only charge these items when they need it.                                                     

You’ll have enough to worry about as the holidays set in. Take the electric bill off the list by doing these simple energy savings tips from Mr. Electric.

Home repairs and electrical work can seem difficult to understand, which can make reading the billing for this work after it is completed even harder. If you are working with an electrician you can trust, the entire process will be transparent and you can feel free to ask questions along the way. Starting with an estimate, and open lines of communication, the bill for an electrician’s work should not be hard to decipher when the work is done.

Your Original Estimate

When you first speak with an electrician, explain what work you would like done and show the space that requires the work. This will give the electrician the opportunity to ask you questions about the current systems, the age of your property, or your precise expectations before work is done. Complications that may arise later can be planned for with this first visit and estimate. Old wiring, tight spaces, and incompatibilities can all be discovered before work even starts.

Parts and Labor

You can discuss parts and labor in the first estimate. If your electrician cannot give you an estimate on the time it might take to complete the job, or will not show you a price list for parts, you might not want to do business with that electrician.

Honest electricians will show you the price for parts, in person or on their website, so you can be sure of the costs before you begin. The estimate on how long it will take to complete the job is a the electrician’s best guess, but you can troubleshoot with him or her to see what might make the work take longer than planned. A quality electrician will be able to name issues that may arise, and estimate what those complications require in advance of taking the job.