Outlets are wired into your home to make it convenient to plug in anything from an appliance to a lamp. However, an electrical fault can occur endangering your home. It’s not a good idea to have 19 different appliances plugged into a single outlet. This can cause a short; not to mention the maze of cords running through the room aren’t safe for family and pets.

Sometimes electrical faults in your system can cause a ceiling light or fan to stop working. After identifying that a bad bulb is not the culprit, you should turn off the power and inspect the light fixture itself. Check the cable and flex connections and make sure the terminal screws are tight. Use a continuity tester to make sure the flex hasn’t gone bad requiring a replacement.

Lights, fans, and other fixtures can also stop working because a residual current device has tripped. You can reset the device but if it trips again it’s best to call in a certified electrician.

If you are still experiencing problems after doing these simple troubleshooting tasks, it’s always best to call in a trained electrician. Outlets or lights that are malfunctioning could be caused by exposed wires somewhere in your electrical system. If your circuit breaker continually trips, it means the current in your home is not cycling as it’s intended. Either way, it’s much safer to have these issues repaired by a good electrician.

Out with the old and in with the new should never end with your used electronics in a landfill. A growing concern across the globe, electronic waste, or e-waste, is rapidly creating a crisis. Only 11-14 percent of electronic waste in the United States ready for disposal is actually recycled or reused, while the remainder is creating environmental and health issues worldwide.

Don’t have time to deal with your e-waste? Don’t dump it. Contact Mr. Electric today. Proper disposal and recycling is essential to preserving our environment and the health of future generations. With the help of HirePatriots and Mr. Electric, we can quickly and responsibly handle all of your electronic waste needs.

Mortgage lenders try to look at the big picture, considering things like taxes and insurance when deciding how much they can loan out to homeowners and buyers. However, there's a major ongoing expense that appraisers currently don't take into account – monthly utility bills. You don't need to be an electrician to understand that the money you pay for power each month makes an impact on your budget and even affects the value of your home. A bill currently in front of Congress – the SAVE Act – would acknowledge that reality and let federal mortgage lenders make energy efficiency part of their formula.

Increasing the Value of Your Home

Essentially, the SAVE Act would make it easier to get financing for efficiency upgrades, even folding funding for it into traditional mortgages.

“This bill would require federal mortgage agencies to recognize the energy efficiency upgrades in a home during the mortgage underwriting process, thereby increasing the value of the home,” President of the Alliance to Save Energy Kateri Callahan said in a statement. 

The SAVE Act claims it would bring a number of benefits in addition to loosening the drawstrings on bank financing for efficiency. Among them:

A Diverse Group of Supporters

The SAVE Act was first introduced in 2013. Although Congress has yet to vote on the measure, it has lined up a diverse group of supporters who aren't typically on the same side of major issues, from the U.S. Chamber of Commerce and the National Association of Manufacturers to the Alliance to Save Energy, the National Resources Defense Council, the U.S. Green Building Council and others.

In the meantime, there are a number of steps you can take around your home today to cut down on your utility bills. If you need any help installing efficient appliances or upgrading your home electric system, contact an expert electrician today.

Two costs are associated with any electrical appliance: the buying price, and the running cost in terms of energy and maintenance. Of the running costs, energy is one of the major items. Typically, the equipment can last several years before requiring a major repair.

Consumers should therefore not just look at the price tag on the item.  Rather, pay attention to its energy rating and available energy saving modes.

Energy star certified refrigerators and freezers are at least 9 and 10 percent more efficient respectively. Other considerations that help in saving energy include selecting the adequate capacity. In addition, the refrigerator or freezer should be kept in a cool place away from heat sources such as direct sunlight or ovens.

More energy savings can be realized by using the proper settings. In addition, ensure the door is closed all the time and that seals are in place. Place the refrigerator or freezer in a spot that allows free air circulation around the fridge; especially at the back where there are cooling pipes.

Manual defrost freezer models use less energy and are therefore more efficient than the automatic defrost models. Another important factor is the design of the freezer. An upright freezer with shelves is easier to organize. However, the chest freezer may be more energy efficient since there is less cold air escaping from the door which opens from the top.

These are usually 40 percent more efficient than the standard purifiers. Other factors to consider include the room size and placement. Select a model adequate for the room; otherwise, an oversized air purifier or cleaner will end up consuming more power unnecessarily.

Energy star certified dishwashers use at least 12 percent less energy and 15 percent less water than the conventional models. However, this may vary depending on the model and other factors.

These dishwashers utilize more efficient technologies that reduce both the energy consumption and water usage. For example, the design uses soil sensors that check the amount of dirt on the dishes.  An optimized cleaning cycle reduces the minimum amount of energy and water. In addition, there are more efficient water jets and a dish rack design that ensures efficient use of water and energy.

Energy Star dehumidifiers

Certified dehumidifiers use 15 percent less energy. They utilize more efficient compressors, refrigeration coils, and fans.

Washing machines

Energy star certified washing machines are usually 25 percent more energy efficient than their equivalent standard models. In addition, they use 40 percent less water. This results in the consumer saving water, as well as energy for both the washing machine and the water pump.

Clothes dryers

Certified dryers use at least 20 percent less energy than the standard models. The equipment utilizes more efficient technologies such as heat pumps. Moisture sensors automatically stop the drying cycle once the clothes are dry. This sensor-based drying machine is more efficient compared to thermostat or timed drying, which continues to consume energy even after clothes are dry.

Televisions qualify for energy star certification when they become at least 20 percent more efficient. Some models can reach up to 40% better efficiency than traditional models, while the set-top boxes can achieve up to 45 %. However, the amount of power used depends on the size of the TV screen, display technology, and resolution.

The home theater systems that are energy star certified are 60 percent more efficient. Certified battery chargers for small household appliances such as power tools, electric shavers, and cordless gadgets use 30 percent less energy.