The Seattle Mariners may have just upped their game when they retrofitted their clubhouse with an LED lighting strategy focused on intensifying the moods, energy levels and performance of their players.

In an article published in Architectural SSL, Stan Walerczyk highlights five core areas of our life where lighting effects human physiology and performance:

Circadian Rhythms — a case study by Ephesus Lighting, when the University of Phoenix replaced their metal halide fixtures with LEDs, they experienced a 75% reduction in energy consumption, a statistic that probably took the sting out of the initial investment. The long-term benefits of LED lighting (less maintenance, a reduced carbon footprint) offer less in the form of immediate gratification, but trickle their gifts throughout future generations.

Did you get what you really wanted during the holidays this year? Maybe that new smartphone you've been eyeing, or that extra-big HDTV? Perhaps you even got a new laptop or tablet. Whatever your favorite gift was, if it plugs into the wall, it could be at risk of electrical surge damage.

Power surges happen all the time, and homeowners usually aren't even aware when they occur. That's because the typical power surge won't completely fry a gadget or appliance -- but it might do a small, imperceptible amount of damage that slightly shortens the life of the device. Add up hundreds of these surges over time, and you could be talking about years of life shaved off of your favorite electronics.

Where Do Surges Come From?

If you think of surge protection as a safeguard against damage from lightning strikes, think again. Surges caused by direct lighting strikes to a home are rare and usually so destructive that a surge protection system can't mitigate all the damage.

Most surges begin and end in your own home, and are generated by a major appliance starting up. Have you ever noticed the lights briefly dimming when the air conditioner kicks on? That's a sign of a power surge. These are the types of surges that damage your electronics one tiny bit at a time.

Other surges may originate at the electrical utility and travel along the power lines into your home. And during bad weather, it's much more likely that you'll get a surge because a fallen branch took down a power line than to experience a direct surge from a lightning strike.

Get Yourself Protected

Surge protection strips or adapters can offer critical protection for select devices, but this isn't the ideal solution. First of all, these adapters are often clunky and bulky, and they can only be used to protect a few things at a time.

They're also delicate, and can be rendered ineffective with just a single major surge. If there's no indicator light that shows whether surge protection is active, you may think you're protected when really you're not.

Whole-home surge protection is the best solution for the protection of all the devices and appliances in your home. Wired into your main electrical panel, a whole-home surge protector extends that protection to every outlet in your home, as well as to major appliances like your air conditioner and refrigerator. These devices can also withstand numerous surges and last for years.

If you're interested in getting this level of protection for the appliances and devices in your home, reach out to a licensed local electrician today for a no-obligation consultation.

If you have an electric car, you may have been excited with the idea of saving money on gas while doing something great for the environment. Unfortunately, your car may not be meeting your expectations. What many people don’t know about electric cars is the fact they can only go about 60 miles or so before they need recharged. If the car is out of juice, it will have to rely on gas and still cost you money. An electrician in Santa Monica, like those at The Electric Connection, can help you make your electric car work for you.

The electric cars are often sold with a standard, slow charger that runs on 120-volts. It can take about 24 hours for a car to be fully charged. It isn’t often you can sit at home for a full 24 hours to allow your car to become fully charged. Because of this, your electric car is not saving you as much money on your gas bill that it could be. You can opt to have a fast electric car charger, technically referred to as a Level II charger. You will need a Santa Monica electrician to install the proper outlet for the charger. This faster charger will charge your electric car in about 6 to 8 hours.

The Level II charger will require a 240-volt outlet to be plugged into. This isn’t a standard fixture in a garage. In fact, most homes only have one or two of these outlets and they are dedicated to the dryer and air conditioner. You invested in an electric car in order to decrease your dependency on gas. Make it work for you with the help of an electrician. Give The Electric Connection a call today and schedule your appointment to have a 240-volt outlet installed.

Keeping your home and family safe is a high priority for every homeowner. One of the best, yet often neglected ways to ensure their safety is to make sure that all of your home’s electrical components are in safe and good working order. When it comes to electricity, being safe is always far better than being sorry. Rather than worrying about loose wires, short circuits and other potentially dangerous situations, work with an electrician in Los Angeles to make sure that your home is as safe as it possibly can be.

Attempting to solve electrical problems on your own can not only put you in immediate danger, but can also make the problems worse than they were to start with. While it is perfectly fine to replace light bulbs, flip breakers back on and perform other similar simple tasks by yourself, tackling anything that has to do with wiring or the other electrical components in your home should be left to the professionals.

If you have a breaker or breakers that trip frequently, then it is time to call a Los Angeles electrician. This can be a sign that you may have malfunctioning appliances, or an overloaded circuit. This might mean that you need to address a problem with a particular appliance, or your electrical service in general. In some case, a small panel upgrade can add additional circuits to your home, allowing you to more evenly spread the load.

Regardless of whether you are faced with an electrical issue or if you need to have electrical components such as a whole house surge protector installed, your safety and the integrity of your home depend on the skills and experience that only a licensed, professional electrician has. For any questions, or to talk about your electrical jobs and problems, give us a call today at The Electric Connection. We’ll look forward to hearing from you.

Visit our company profile.

The living room seems a little dim, you think. Here’s the DIY solution you cook up: you head over to the hardware store, buy a brighter bulb, screw it into the nearest lamp and bask in the incandescent glow. Easy, right?Not exactly. Using a lightbulb with higher-than-recommended wattage for a specific fixture is known as overlamping. This seemingly innocent practice is actually surprisingly dangerous, and is one of the leading causes of house fires in the United States — right up there with candles, smoking and cooking mishaps.

Overlamping is one of the most commonly overlooked mistakes a homeowner can make, and it can be deadly. A 2011 electrical fire that killed 11 people in Brisbane — the according to home improvement blogger Taryn Williford. When you place an incandescent bulb with wattage that’s too high in the socket of a lamp that cannot provide the required electrical output, the ensuing heat and intensity of the bulb can scorch or melt the socket and the insulation of the lamp's wiring.  

Now you have prime conditions for arc fault. An arc fault occurs when a spark jumps through the air between exposed wires. This sounds dangerous, yes? It is — in fact, the National Fire Protection Agency and the National Association of State Fire Marshals electrical power. A CFL often has a tubular shape atop the familiar screw-bottom.

An LED (light-emitting diode) light is directional, rather than radiant. This allows the LED to use much less energy than an incandescent light or even a CFL. LEDs can also directly replace incandescent bulbs in some cases.

CFLs use a much lower wattage than incandescent bulbs and create far less heat, making overlamping situations far less likely. LEDs also use much less electricity and even remain cool to the touch. The risks of overlamping are negligible.

There are drawbacks to any lighting solution. Incandescent (even halogen) lights are energy inefficient. CFLs are made from materials that are terrible for the environment. LEDs burn out at a quicker rate. The right light for you is the light that makes you most comfortable in your home — and that’s a decision you need to make.

If you live in Maryland, Northern Virginia or Washington, D.C. and need schedule electrical repair service online now.