By: Jason Lee

Ever look at old family photos? You remember, the faded picture with the brown couch, wood panel walls and yellow(ish) shag carpet. Most people look at the photo and see these things and the smiling faces of the family. We look at these photos and are taken back to a time when another generation set the rules.

But looking a little more closely at the photo of years gone by, you might notice something that is still around the old house and room today. Hidden in the photo, but still prominent in the room where the photo was taken, is that old, painted over two prong outlet. You know the one. It had the gaudy horse-carved table lamp plugged into it. At one time it was white but it was painted to match the wall color when the paneling came down and the sheet rock went up. You changed the entire look and feel of the living room over the years but that outlet stayed the same. And, why not? It only served one function and how often does technology change, right?

The two prong outlets had been the norm for so long and years of remodeling and redecorating never seemed to affect the outlets. No upgrades were required. Just slap a new cover on it and it was good to go. When “new technology” came about, we were ready with the “cheater” outlet that still enabled us to use three prong electronics with the old two prong outlets.

But soon everything seemed to require three prong outlets and that left us having an abundance of those grey three-to-two prong adaptors in our junk drawer.

Old photos are great to look at and reminisce about past times. But, we are constantly changing and our technology is expanding at a rapid rate. Modern times call for modern outlets. Two prong outlets had a good run and they served a valuable purpose, but there comes a day when the grandfather, who led the head of the family for years, has to retire and give way to change and a new way of doing things.

Outlet changes should be made because today’s outlets give us piece of mind, safety and convenience. Safety has been a top priority for new outlet designs. All modern homes, those built after 2008, should have child-proof outlets installed.

Today’s modern three prong outlets come with a variety of features for convenience and safety. Although the days of the two-prong outlet are numbered, modern GFCI, child-proof and combination outlets will never forget their roots.

Electrical installation testing is a practice that has become more important over time. This is due to the increasing complexity of installations in both commercial and residential spaces. When it comes to electrical work, the top priority is always going to be safety. This focus is the reason electrical standards and wiring regulations exist in the first place. Electrical installation testing serves the purpose of identifying any possible deficiencies. These shortcomings could be areas in which an electrical system doesn’t meet regulations.

It’s important to have older electrical systems looked over to ensure they’re still in good working condition. At the same time, new installations need an inspection to make sure they conform to today’s stringent standards. You might also feel inclined to have testing done if you’ve recently purchased a building with preexisting installations. If you’re curious about what makes electrical installation testing so complex, or if you’re wondering why only a professional should be doing it, read on for more information.

There are different phases of an electrical installation to keep in mind. The first step is to perform a visual inspection, which is exactly what it sounds like — an expert will confirm the permanently wired electrical components are compliant with safety regulations. He or she will make sure there are no outward signs of damage, and that the required safety measures are present.

After the visual inspection, electrical testing begins. This is where having a qualified individual working becomes even more critical. Everything from specialized training to safety-oriented clothing is necessary for this aspect. In fact, non-authorized people might have to keep a certain distance away from the testing itself.

The testing will cover a building’s wiring, as well as its various components. This can include electrical panels, outlets, distribution boards and lighting. Essentially, the examination covers all systems that conduct electricity within a building. The electrician will use the tests to make sure every necessary precaution is in place to reduce the risks of injury or death due to electrical shock.

In some cases, the testing will call for exploratory work to complete the job as effectively and safely as possible. Parts of the system might need to be temporarily shut off for this. This means you should make sure you don’t have something important — and electricity-based — going on while the installation testing is taking place.

A school, whether its grade school or a college campus, can use up a lot of energy during the day. From heating the building to inefficient lighting fixtures in the building; a school that is running 8-10 hours a day can prove to be a huge consumer of energy and thus; a high overhead to maintain.

This post is specifically for those whom work for a school or college campus that can either make the decisions, or can recommend new ideas to those who do make these types of decisions. The overall goal of this post is to bring the most actionable energy saving ideas for schools so that you can start looking into them immediately.

We are going to be covering 15 practical tips and ways that you can start saving energy in schools and become a greener, more sustainable facility overall. Here they are…

hallways, classrooms, and really anywhere with lower ceilings that are flat.

This technology is, more often than not, fluorescent. Believe it or not, this actually isn’t the most energy efficient lighting technology out there. So what is you ask?

Well, LED technology is by far the most efficient luminaire on the market today. By switching from fluorescent to LED, you will be able to realize a 30% reduction in energy usage associated with your tube lights.

As for you parking lot and sports fields, you can make the switch away from technologies like metal halide or HPS over to LED and realize every greater energy savings by up to 75%! Talk about a lot of energy being reduced.

And no, screen savers don’t save energy. But, what does save energy more-so than a screen saver is the “sleep” function that every computer has. On top of that, next time you plan on upgrading your computers, make sure you buy Energy Star qualified ones. This means they’ve passed some energy efficiency tests and are much more energy efficient than non-qualified computers are (same with your lighting system, make sure it is Energy Star or building commissioning, you get every single last area of your school inspected to ensure it is running exactly how it was designed to run. A lot of times we overlook things that are unique issues to your school, and no matter how long of a list we read on ways to conserve energy at school; we will never see everything. So our tip for you is to bring in a professional to do a full building commissioning audit, and let them tell you what is up.

Face it, a lot of classes happen during broad daylight and by not using up that free light from outside is a pure waste. By opening blinds to there fullest (when appropriate) you can reduce the amount of lights you need on by nearly half, depending on the day and time of year.

Just make sure to remind everyone to do this otherwise, you’ll never will with this tactic. Remember: you need to get the school on board or else you can only do so much.

Alternatively to just opening the blinds and windows, installing skylights into virtually any area of the building can be an even more effective way of getting the most natural light into your building. This is probably most beneficial for areas that would otherwise have no natural light whatsoever, such as hallways or interior rooms.

We’ve already brought up some points about your heating system, but here is yet another. Think about how often students are in the hallways, not nearly as much as they are in classrooms, right? So, why not make an initiative to heat the classrooms and stop heating those huge hallways that waste tons of heat to the outside from all those doors being opened.

Just make sure that everyone is closing their doors if you do decide to go this route. Likewise, you could install doors that automatically close which will prevent random doors from being forgotten about.

Although this won’t directly save your school energy, it sure does help reduce both waste and energy associated with creating new materials. The most simple way to start the promotion of recycling at school is simple; make it readily available. If you aren’t putting recycle bins next to every trash bin, most people won’t go out of there way to recycle so they will just throw it away and let it go to the landfill.

A step further would even to start investment in solar technology can be hefty, but rebates and grants are out there to make it a more affordable option that ever. On top of that, you are becoming a role model to the community by showcasing what conserving energy can do when used with solar energy technology. Let solar generate your building a positive ROI all while conversing the planets resources.

We think the list could endless of all the possible ways to save energy in school, so we must of forgot some. Be sure to comment down below your energy conservation tips that will help out school facilities become greener!

Conclusion

All of these tips are exactly how energy efficient schools are becoming more sustainable, reducing ongoing costs, and generating a positive atmosphere and educational system for students and generations to come.

Don’t let the upfront costs scare you, instead look at the bigger picture. If you have to invest money now to save 10x later, isn’t it worth it? All of these things will do just that, improve the bottom line. And not only are we doing that, but we help the environment out just a little bit too. Sounds like a win-win to us! Just remember that saving energy at school doesn’t have to be hard, just take it step by step and you will slowly see the results of your efforts build up!

Anyways, to wrap it up we’d like to invite you to share any of your own energy conservation tips for schools that you may have done or even just thought of that may benefit other schools across the globe. Share your tips in the comments below, you never know who it may help. And remember, an energy saving school is a happy school!

As a top Dallas Electrician we know that your family’s safety is one of the most important things on your mind throughout the day, so we decided that now would be a good time to re-visit the subject of Smoke Detector Replacement and maintenance. As the weather is cooling off, and we are coming into the holiday season, when heaters, cooking, and decorations can bring more potential safety hazards into your home, it is very important that you are certain your family is protected in the unfortunate event that you experience a house fire. According to the U.S. Fire Administration, “Each year fires occurring during the holiday season claim the lives of over 400 people, injure 1,650 more, and cause over $990 million in damage.” Remember these lucky 7 tips to keep your family safe this holiday season by ensuring that smoke detectors are installed correctly in your home, and that they are all in working order.

Smoke Detector Battery Replacement: At least once a year

One of the most important things to remember, if you already have smoke detectors installed in your home, is to replace the batteries at least once a year. An easy way to remember this is to change the batteries in your smoke detectors when you change your clocks for daylight savings time every year. Picking up this helpful habit makes it much easier to remember.

Smoke Detector Replacement: Every 5 to 7 years

Many smoke detector manufacturers recommend replacing the smoke detector unit itself every ten years, but a smoke detector’s reliability will actually decrease after 5 to 7 years. While this may seem like an extra cost, it is certainly a small price to pay for making sure that your family will have the most reliable method of early warning in the event of a fire, providing vital time for everyone to get out safely.

Smoke Detector Cleaning: At least twice a year

Dust, cobwebs, insects, and other airborne particles that make their way into our homes can collect on sensors and contaminate the circuitry inside your smoke detector, causing it to be less effective at sensing smoke. This is one of the most forgotten factors simply because many homeowners aren’t aware of the effects that dirt and dust can have on a smoke detector. Think about how dirty the blades of your ceiling fan would get if you never cleaned them. The same dust that accumulates on your fan blades will accumulate inside your smoke detector. At least twice a year, use your vacuum cleaner wand attachment to carefully remove dust and other contaminants from the inside and outside of your smoke detector.

Smoke Detector Types: Ionization, Photoelectric, or Both

There are two commonly used types of smoke detectors, each with their own advantages and disadvantages. Ionization style smoke detectors are more responsive to quick moving, high flaming fires, while photoelectric smoke detectors are more responsive to smoldering fires that produce more smoke. You can never know what type of fire will happen in your home, so a great option to ensure the best protection is to choose smoke detector units that provide both ionization and photoelectric detection of smoke and fire.

Smoke Detector Location: Key guidelines for safe placement

Smoke detector placement is highly important in order for them to work properly. When installing smoke detectors in your home, it is ideal to have a smoke detector in each room, but at the very least, you should install smoke detectors on every level of your home, and in hallways near each bedroom to increase the likelihood that your family will be able to hear them even while sleeping. Smoke detectors should be placed 6 to 12 inches from the ceiling, and you should avoid installing them near vents, fireplaces, or kitchen appliances to reduce the accumulation of dust, soot, and oily residues from cooking.

Interlinked Smoke Detectors: Whole house warning

Modern smoke detector systems are more than simply individual detectors. It is recommended to install a system that allows all of the smoke detectors in your home to communicate with each other causing all of the detectors to alert of the fire if any single detector senses one. These systems can be wired directly into your homes electrical system, or allow wireless communication between each smoke detector. This has been a major advancement in smoke detector technology, allowing more time for residents to escape if a fire begins in any area of the home. These systems are especially valuable in late-model homes where the master bedroom is often on the opposite side of the house from children’s rooms.

Smoke Detector Testing: At least twice a year

We often take for granted that a smoke detector will simply work as designed once it is installed, but as you can see from this list, there are a lot of factors that go into a reliable smoke detection system. At the very least, make sure that you test your smoke detectors twice a year using the test button that is located on the smoke detector unit itself. When testing interlinked smoke detector systems, be sure to verify that all of the other detectors in your home alert when you test each unit individually. Even if a unit alerts when you test it, if it does not cause the other units in the home to alert, that means that there is an issue with communication between the units, and it should be inspected by a licensed Dallas Electrician.

If you have any concerns about your smoke detector system, or any other electrical projects in your home, the top Dallas Electricians at ElectricMan Inc. will be happy to help. Reach out to us by phone at 972-792-7270 or through the “Contact Us” page on our website at www.ElectricManInc.com, and let our professional electrical technicians ensure your family’s safety by guaranteeing that the job is done right!