So many exciting things have happened this year – A new blog design, an Pegasus Lighting website, taking into consideration all the things that Pegasus holds so dear and making them even better:

And this week it happened.

At the end of the day, it all comes down to customers having a great experience on our site and wanting to come back time and time again. Our new design has a clean look with a simple color scheme and easy-to-read font. Clear navigation and integrated filters make the perfect lighting product easier than ever to find.

We’re eager to hear your opinion of the Facebook, Pinterest.

5-pin SPDT (single pole, double throw) automotive relay.

Relays are essentially two parts in one package. The first part is an inductive coil (pins 85 and 86). This coil is the “trigger” function of the relay. By applying both a positive (+) and ground (-) to the contacts, current passes through the coil. When current passes through the coil, a magnetic field is generated and moves the switch (the arrow in the diagram). This is where the second part of the relay comes into play.

The second part of the relay is the “switch.” The switch has three interface contacts—common, normally closed, and normally open. “Normally” refers to the state of the relay not being energized.

While relays can be used for virtually any task, there are some very useful, simple applications for adding LED lighting to a vehicle. Please note that this wiring only pertains to the relay—not the wires in the vehicle. Before interfacing with a wire in a vehicle, always ensure you test the wire with a digital multimeter first to confirm circuit function.

Positive Switching

Positive switching is used for applications where the “trigger” for your switch or circuit is positive. This could be an ignition, brake, or reverse light wire for example.  This could be used for applications such as off-road light bars, work lights, additional brake lights, and other exterior lighting.

Negative Switching

Negative switching is used for applications where the “trigger” for your switch or circuit is negative. Negative triggers are often found in door, hatch, and trunk triggers as well as many interior switches. This could be used for applications such as footwell lighting, truck bed lighting, under-hood lighting, and other interior lighting.

Switch Activated With Ignition Override

This is useful for applications where you want to turn your light on or off with a switch but only want the light to remain on when the car is running or key is in the “ignition” position. The main advantage to this is—even if the switch is left on—the light (or output circuit) will shut off when the key is turned off so that the battery will not be run down.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Antique architecture might be beautiful, but the electrical wiring in old houses doesn’t carry the same kind of charm. If you have an older home with an electrical system that hasn’t seen updates in a long time, you could be living in dangerous conditions without realizing it.

There are warning signs that may indicate your wiring is too old, but if you’re ever in doubt, there’s a fool-proof way to get an assessment of your system: Call in a professional! An expert will perform an in-depth inspection of your home’s wiring so you can be aware of the situation and the solutions for it.

With outdated wiring, you may notice strange signs from time to time. Some of them might occur with more regularity than others, but any instances at all can be cause for concern. In general, you’re at risk for having old wiring if your house is 40 years old or more. A few warning signs include:

Although old wiring can raise insurance premiums and keep you from using as many appliances as you’d like, the most important issue is safety. Over the course of time, the insulation surrounding the wires will break down until it eventually leaves the wiring exposed. The insulation protecting older wires doesn’t last as long as it does in newer installations. This means outdated electrical systems are much more likely to feature exposed wiring than those installed more recently.

With inner wiring exposed, the likelihood of short circuits and power failures goes up. Worse, deteriorated insulation translates to a much higher risk of suffering from electrical shocks or having fires break out in your home.

If you have any doubts about the wiring in your house, don’t take unnecessary risks. Ignoring the warning signs of an outdated electrical system can put you and your loved ones in danger. Beyond that, whatever money you might hope to save by not calling a professional would only go into repairs later on.

For any home that depends on natural gas power for heating, cooking, or other tasks, a risk exists of exposure to carbon monoxide. Most modern gas appliances and pipes are built to high safety standards and should present little danger to a household. However, it is wise for any home with a gas line to set up carbon monoxide detectors as a precaution.

With the right lights and accessories, LED landscape lighting is a breeze to install. Our plug-and-play different brand of lights in a G-LUX system. There are installation options and accessories for LED pond lights/fountain lights, spotlights, path lights, hardscape lights, well lights, and more. Check out the photos below for some landscape lighting ideas and layout options. With easy-to-use G-LUX accessories, such as extension cables, splitters, power supplies, dusk-to-dawn sensors, and waterproof junction boxes, any setup is possible.

Installation Accessories:

Waterproof Junction Box

You can use extension cables to lengthen the reach of or increase the number of lights in your LED landscape lighting system. Splitters are available in 3-way and 5-way options, and extension cables come in 6.56-foot, 16.4-foot, and 32.81-foot lengths. Use any combination of these plug-and-play accessories to add LED landscape lights where you need them. Make sure that the power supply you choose can handle the combined wattage of all your LED lights.

For this type of installation, you’ll need a G-LUX LED landscape light. Connect the female end of the pigtail power cable to your LED light, and connect the pigtail wires to the main line that runs to your other lights and existing power supply. You can also wire your G-LUX LED landscape light directly to your power supply.

You can create a G-LUX landscape lighting system using G-LUX LED lights and G-LUX dusk-to-dawn sensor will turn your landscape lights on at dusk and off at dawn. A sensor with an automatic timer is also available to keep landscape lights on for two, four, or six hours after dusk. The sensor must be plugged into your G-LUX power supply, and anything that you want it to control must be plugged into it. If you want the sensor to control multiple lights, plug your splitter or extension cable that is plugged into the splitter into it.

If you’re using waterproof G-LUX LED well lights or spotlights in ponds or fountains, there are a couple waterproof accessories that you might need. Use a G-LUX waterproof wire connector to do so.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.