Most people have experienced a circuit breaker trip at some time or the other; and the first couple of times it happens, it can be quite alarming. However, this is a very important safety component in any electrical circuit. A circuit breaker is essentially an automatic device used to stop the flow of current within a circuit, as a safety measure. It is specifically designed to protect your property, equipment in your home/commercial space and you from overloading the electrical circuit.

The sole reason a circuit breaker trips is to prevent the overheating and overloading of an electrical circuit, beyond the capacity of that circuit. If there is no breaker in place, the electrical units in that circuit can get damaged and potentially lead to a fire.

In case a circuit breaker trips, the very first thing to do is to locate it in your panel box. The switch you are looking for is the one that isn’t completely in an On/Off position. Once you turn the switch into the ‘on’ position, the power will be restored. In case the power doesn’t come on, simply switch it off and then on again.

If the circuit breaker trips even after you have reset it, don’t just try resetting it again. It’s doing what it’s designed to do and telling you that there is something wrong that has to be investigated. There are three different things that can cause a circuit breaker to trip:

This is the commonest cause of a circuit breaker trip. It occurs when the electrical energy that’s flowing through the circuit is much more than what it can handle. The simplest way to solve this problem is to redistribute the power to some other circuits. Very simply put, in case too many heavy appliances are connected to a single circuit, move a couple of them to one that isn’t as loaded.

It’s important that you check whether the circuits aren’t loose. First, switch off the power and look for any loose wires; you can do this by closely inspecting the hot wires and outlets that lead from the service panel to the circuit breaker, and then tighten the connection that’s loose.

If after checking the circuit overload, you find there aren’t any issues in that areas, the problem could be a short circuit. This is caused when any live wire touches another neutral/live wire. At times a short circuit may be caused by a broken wire within the breaker. It’s far more difficult to identify this as it could be just about any part of the wiring system which is connected to that circuit. At times, the culprit could be an appliance that’s plugged into an outlet.

This issue is quite a dangerous and severe one and it’s important that it be diagnosed quickly. It can be quite tedious to look for a short circuit and the outlets, plugs and wiring that are connected to that circuit, but these checks are important. Look for cracks or signs of burning in the insulation and call an electrician without delay.

If it’s neither a short circuit nor a circuit overload that’s caused the circuit breaker to trip, it could be a ground fault issue. This happens when any hot wire touches the metal outlet box or the ground wire.

If a circuit breaker trips in your home or commercial property, keep in mind that it’s a very serious issue and not something that should be ignored. For the best electrical solutions, call Allround Electrical at 1300 169 263. You can also drop us a line via email or contact us through this online form.

Thanks for reading,1300 169 263

This winter, Mr. Electric® wants to help you power your tomorrow by choosing the best holiday lighting gadgets. We searched all around to find you the top four lights and tools for your home displays!

This is a great way to light your outdoors without using energy and without using an outlet. The sun will charge the lights during the day and will turn on automatically when the sun sets. Each package contains 50 lights over 23 feet, making this an affordable alternative to outdoor lighting.

Source: Solar Powered Light Strings

This is a durable and heavy duty timer that helps you control your holiday lights.  It has one grounded outlet and a manual ON/OFF switch. This comes with an 18-inch cord and grounded plug to make it a durable timer that’s a safe choice to use on Christmas lights, landscape lighting or fountains.

Source: Outdoor Timer

These LED light strips are designed to be versatile. You can cut or bend them to fit your custom displays. The hue app allows you to change your light colors and turn ON/OFF all from your mobile device or tablet. We also love the efficiency of these lights and have a good feeling more and more people will began using these, instead of the traditional lights, in the future.

Source: LED Light Strips

The Light Keeper Pro is a small hand-held tool capable of fixing mini light sets, icicle and net light sets, yard decorations, pre-lit trees and wreaths. Simply plug in your light set and press the trigger to repair most of your lighting problems.

Source: Light Keeper Pro

Show off your holiday light displays by tagging us in them on our Facebook page. Don’t forget – if you need some holiday lighting help, you can give us a call and we will set up and take down for you!

Are you looking for a way to dodge the cold this winter but still enjoy the outdoors? Then why not consider a hot tub! The experts at Kolb Electric can wire a hot tub for your home easily. But there are some things you need to know before beginning installation. There are specific limitations and home wiring necessities before you can relax in your new hot tub.

Got more questions? Contact the experts at Kolb Electric today!

If you’re looking to complete a hot tub installation in MD, VA. or DC, you should first understand the electrical requirements. Most hot tubs need a dedicated 240V, GFCI circuit to safely provide them with the power they need to run. To meet your hot tub’s electrical needs, you need to make sure your home is running on at least a 100 amp electrical service. Most homes built in the past 50 years or so meet this requirement, and many homes built more recently even exceed this, with 150 – 200 amp service. However, if you live in a historic home in the area, you may need to upgrade your electrical service before any hot tub wiring can be done. A licensed electrician from Kolb Electric can perform what’s known as a “heavy up” to get your home’s electrical service standards up to par for a hot tub installation in MD, VA, or DC.

If your home is ready for hot tub wiring, it helps to understand some of the guidelines that are outlined in the National Electrical Code (NEC), specifically ones dealing with hot tub installations. For instance, it is a violation of the NEC to install a hot tub under power lines. Additionally, you should avoid installing low-voltage lighting within 10 feet of your hot tub.

For all your hot tub wiring needs in Maryland, Virginia, and Washington, DC, contact the electricians at Kolb Electric today—877-287-1179877-287-1179 or click here!