Let’s face it—halogen and incandescent headlight bulbs are a thing of the past. fanless, driverless LED headlight bulbs were used in this installation.

If your vehicle allows for horizontal adjustments, mark the distance between your headlight centers with two vertical lines of tape. These lines are important for projector headlights and/or lining up beam cutoff points. Repeat these tape lines for your other headlight.

6. Remove your headlight assembly if necessary, remove the current bulbs, and install your new LED bulbs. Check your owner’s manual for specific instructions on how to replace your headlight bulbs.

7. Depending on your vehicle, you may have to adjust your headlight beam before or after the assembly has been reinstalled. Your owner’s manual will explain how to adjust the beams. Align each headlight so that the top edge of the beam is at the same height as your horizontal line(s). If your headlights can be adjusted horizontally or produce two light cutoff points, use the vertical tape lines to align them properly.

3. Shake the vehicle to ensure that your suspension system is settled. For more precise adjustments, inflate all tires to their designated psi capacity and have someone sit in the driver’s seat. Also, make sure that your vehicle’s gas tank is at least half full.

4. Measure from the ground to the center of your headlight assembly where the bulb is located. This step must be done for all vehicles. If your vehicle allows for horizontal headlight adjustments in addition to vertical adjustments, it’s important that you also measure the distance between the centers of both headlight bulbs. The vehicle featured in this video allows for vertical headlight adjustments only; therefore, center lines aren’t necessary but are shown for demonstration purposes.

5. Turn on your low-beam headlights. Using painter’s tape, mark your headlight measurements on a flat wall. Measure from the ground up, and apply a horizontal line of tape to the wall; this line represents the top of your headlight beam. You can either apply one long, continuous line or small sections where the brightest areas of the headlight beams are shown.

If your vehicle allows for horizontal adjustments, mark the distance between your headlight centers with two vertical lines of tape. These lines are important for projector headlights and/or lining up beam cutoff points.

We, of course, love lighting. Layers of light help to brighten any space, highlight certain aspects of a room, and help set the mood. Justin Krutz, a blogger for Palatin Remodeling, sent us this guest post with interior design decorating tips to help you brighten your home beyond just lighting. Thanks Justin!

It’s incredible the way lighting can change outdoor spaces. As is the case with indoor spaces, spending comparatively little on lighting can produce dramatic results. A DIY outdoor lighting project might be just the thing to make you fall in love with your home all over again. But before you begin an outdoor lighting project, it’s important to think about your options. Here are 10 tips for 10 approaches to outdoor lighting.

1. Using Outdoor String Lights

Outdoor string lights are just great. But there are so many different kinds! Some have bare bulbs; some have lanterns. Some are LED; some incandescent. Some are white; some are colored. Make sure you research your options and choose the ones that are right for YOU!

2. Taking DIY Outdoor Lighting to the Next Level

Sure, you can install a standard low voltage lighting fixture and be justified when you say you Did It Yourself, but have you ever considered making your own DIY outdoor lighting fixtures? Mason jars seem to be the ingredient of choice when constructing your own outdoor lights. The internet is full of instructions for making DIY outdoor lighting fixtures, so do your homework and find the perfect project to make your outdoor area more luminous.

3 . Making it Modern

Let’s get weird! Isn’t that what modern outdoor lighting seems to say? I guess it depends on whom you ask. Modern outdoor lighting usually consists of interesting light fixtures with unusual, playful designs, and they can really make your outdoor vibe more interesting and thought-provoking.

4. Showing Off Textures

Sometimes you start with a particular light source in mind. These days, that light source is often LED. If you’re sure you want to use outdoor LED lights, you have a wide variety of outdoor LED light fixture types, from LED rope to LED tape to LED path lights, step lights, puck lights, recessed lights, and string lights. LED outdoor lights are highly efficient and look great. And some, like the one above, run on solar power! That means free!

8. Decking Out the Deck

If you are focused specifically on outdoor deck lighting, make sure you think about caution. Outdoor deck lighting should entail step lights if there are steps and should include lights around the perimeter of the deck. LED tape or rope, colored or white, are often great for running on the underside of deck railings.

9. Using Timers

The new Live Laugh Love collection from Murray Feiss features a rustic Grecian Bronze finish with an uplifting mantra artfully imbedded in the design. Choose from 4-light chandeliers, 6-light pendant-style chandeliers and coordinating wall sconces.  Just in time for summer 2013, these new lamps impart a light-hearted message in a full-bodied design.

LIVE:

What do we mean by “lamp life?”

The “average life” of a light source is determined through controlled testing on a large sampling of light bulbs (lamps). Lamps of the same type, make and model are switched on at the same time, and when 50% of the bulbs in this large sampling burn out, this is the determined rate of lamp life.    Thus, due to slight variations in the environment, usage and make-up of each light bulb, the “rated life” listed on each bulb carton is an estimate; and, each bulb will perform slightly differently—some may outlive the “rated life” and some may die out before.

LAUGH:

It has been said that the average American child laughs out load about 400 times each day.  But, as children grow up into adults they laugh a whole lot less—maybe four times a day!

Studies show that just thinking about being happy or simply imagining yourself laughing, recalling a funny story, reading a piece of inspirational advice—all of these activities boost neural connections that can actually elevate your happiness quotient.

Although a serious lighting design is no laughing matter, new lighting compositions from Murray Feiss are made to uplift your spirit and enhance your life. So, why not install a new lamp to remind you to  “Live, Laugh and Love” every day!

LOVE:

What is a love light?

The term “love light” was made famous in 1961 when Bobby Bland recorded his R&B-style hit  “Turn on Your Love Light.”  The song has been popularized over the years, and recorded by many other bands including The Grateful Dead.  In  1999, the song was included in the Hall of Fame’s list of  “500 Songs that Shaped Rock and Roll.”

Love light may also include fine novel home lighting and accessories crafted to fill our homes with beauty and the most uplifting lighting effects.

Make a statement and select the seasons top fashions with bold new lighting and home accessories.  The Live Laugh Love collection from Feiss will give you reason to smile and get happy—quality design, accessible price points and exceptional service have kept Murray Feiss at the top of the lighting industry since 1955.

Other fun summer highlights from Feiss include island lights, mini chandeliers and ceiling pendants from the “Celebration” collection and colorful table lamps in the “Kennedy” collection.

“Smart” technology is all the rage right now. However, it’s a bit of a disservice to call the Nest a smart thermostat. A learning thermostat suits the bill better. The Nest system learns your heating and cooling habits, and is able to incorporate the information that it gathers, and the data that it compiles, in order to help you live comfortably in a far more convenient manner. With Nest Sense, the Nest thermostat is able to learn about how long it takes your house to warm up and to cool back down, as well as how it can utilize your existing HVAC equipment in a more efficient manner. You will get monthly energy reports from your Nest, but the truth is that this system is able to help you make your home a more efficient place, without you even having to think about it.

With technology as advanced as the Nest thermostat, you may be wondering what its applications are beyond simply heating and cooling your home in an incredibly convenient and efficient manner. Well, there are many different products which are actually being designed to work with the Nest, as denoted by the “works with Nest” logo. When you see this logo, you’ll know that the products it appears on, from washing machines to lights, are Nest-ready. Contact us today to learn more, or to bring your household further into line with the technology of the future.