Older homes generally have a character quality that can’t be seen in newer houses. These homes offer great value, and renovation improvements can bring new life into them. Unfortunately often enough the electrical wiring is never inspected during these updates for years at a time. To ensure that all your hard work is going to be safe, look for these common dangers that could threaten your older home.

From the 50s to 70s many homes were built with aluminum wiring. This was used because it was cheaper and more conductive than copper wiring. Unfortunately many pitfalls were found with aluminum wiring after it was used. Overheating and cracking are common problems with aluminum wiring. If your home was built in this time period, have your wires inspected. There could be a number of hazardous points behind your walls that may cause major issues. For more information and hazard signs of aluminum wiring, read our blog article.

Knob and tube wiring was used in homes in the early 1900s and even as early as 50 years ago. It is possible that these homes still contain knob and tube wiring in them. This wiring can be dangerous as it is more likely to crack and result in electrical fires.

The dangers of these two out-dated wiring systems are that they were installed without worry and the problems were not realized until years later. The electrical wiring systems in these homes were left untouched and so did the problems that came with them. Electrical fires, are especially dangerous as the fire starts and spreads quickly and out of sight. By the time the fire is visible it is too late and the damage can be done.

Over the years homes can see additions: new rooms added onto the home, new electrical lines added, hot tubs, etc. If a licenced electrician did not perform these additions there can be a mess of wire connecting the additions to the original home. This problem comes to a head at the service panel. If it is not properly maintained the breaker will trip constantly and electrical outlets will be overloaded. This is very dangerous as the electrical panel is in charge of keeping your home safe from electrical hazards. It is very important that the electrical panel is upgraded in order to provide the correct control of electricity throughout the entire house, old and new. This also means the panel is properly labelled so it is easy to maintain if further updates are being made.

While there is nothing wrong with purchasing an older home, we recommend that a licenced electrician inspect the electrical system in order to identify potential electrical hazards. One of our expert electricians can provide you with a list of items that should be handled. This will help you have peace of mind that your family is safe in their home.

If you’ve ever watched the show “Holmes on Homes” on HGTV, you’ve likely seen the problems associated with old or faulty wiring.  Mike Holmes tends to get very agitated by safety issues, and for good reason.  Each year, over 40,000 homes suffer fire damage due to home electrical problems.  These electrical fires account for hundreds of deaths and thousands of injuries.  And what’s the main culprit?  Old wiring!

If you live in a classic home built before 1940, chances are you have old wiring in the house.  You may have knob-and-tube or Romex wiring, both of which can become brittle over time.  The insulation dries out and starts to crumble, causing the inner wire to become exposed. The cloth insulation around the wire deteriorates with age and eventually becomes unsafe.

But perhaps one of the biggest threats of Romex and knob-and-tube wiring is that these types of wires aren’t grounded.  That means if one of your appliances shorts out, you could become the path to the ground for the electricity.

Even if your home is only 20 or 30 years old, you could still experience electrical problems at home due to a lack of capacity.  Most homes built more than 10 years ago are not designed to handle the amount of electronics we use today.  Think about it:  if your house was built in 1980, it was built before home PCs and laptops and HDTVs and surround sound and all of the other toys and gadgets we use today.  These appliances can draw a lot of power, and your current electrical wiring may not be up to the task.

If you own one of the one million houses in the DFW area that’s more than 20 years old, it’s a good idea to have a licensed electrician come out and take a look at the wiring.  He or she can make sure that your house will be safe and productive for many years.

ElectricMan Inc. is one of Plano’s most trusted electricians. Nick Schaeffer, Mr. ElectricMan himself, has quite the resume for a master electrician. He started the company by himself in 2004 and hasn’t looked back since! For more information about Electricman’s list of electrical repair services, please visit www.ElectricManInc.com

With all of the Read more on retrofitting vs replacing here.

Undeniably the best technology for any business is a LED retrofit. Why is this? For many reasons:

What is LED Retrofit and it’s Benefits?

LED Retrofitting is one of the biggest lighting upgrades building are doing these days. Companies want to get rid of technology like LED with retrofit kits can bring along many is an organization that tests lights and either deems them of being quality and efficient or not. If your industrial lights you are inquiring about are not on the DLC or EnergyStar, you should avoid these at all costs.

When you walk in the door of your home at night, you expect to be relatively safe. You expect the home to be constructed well and to protect you from the elements. Your home keeps you warm in the winter and cool in the summer. It is where you spend time with your family and feel the most comfortable. That is the idea at least. Unfortunately, there are often hidden dangers in the home that need to be addressed. It only takes a few changes to make your home a little safer. These are things your Los Angeles electrician can help you with. The team at The Electric Connection has a trained staff of electricians ready to help you make your home a little safer for you and your family.

Installing GFCI Outlets

These are standard features in recent construction, but older homes were not equipped with GFCI outlets explains an electrician in Los Angeles. These outlets are specially designed to be used around areas where water is at, like the bathroom and kitchen areas. The outlets will trip the breaker the second the flow of electricity is interrupted by water. This will prevent an electric shock.

Hard-Wired Smoke Detectors

These are an ideal option to the standard battery-powered smoke detectors. A hard-wired smoke detector will need to be installed by an electrician. Los Angeles homeowners will love the fact that the smoke alarms are wired directly into the home’s power and do not rely on batteries. If a fire breaks out and the smoke detector alerts, it will trigger the rest of the smoke detectors that have been hard-wired into the main power system.

These are two fairly simple, basic upgrades that can make your home a little safer for you and your family. Give The Electric Connection a call today and schedule your outlet upgrades and smoke detector installation.

To be honest, I’ve always liked the look of CFLs. Yes, there have been Image via Plumen.com

The light bulb itself does everything you’d expect it to. It’s 80% more efficient than a standard incandescent light bulb, and it’s expected to last 8 years. However, this isn’t a light bulb you want to hide behind some shade.