We’re partnering with the Red Cross to collect donations and help save lives, reduce injuries, and cut down on needless losses caused by home fires.

Each year, 12,600 people are injured and 2,500 die as a result of home fires in the United States. Property loss as a result of this is estimated to be at $7.3 billion, making a devastating impact on the wellbeing of families around the US.

By donating you are providing the Red Cross with the resources it needs to provide critical services for people who have been impacted by home fires. They will also provide lifesaving tools, such as smoke detectors, and information to help support efforts for prevention of home fires, allowing families to stay safe and ensure that they are doing everything in their hands to avoid this catastrophe.

Help support us as we help provide families with the help that they need to rebuild their lives.

Large factories, refineries, and oil facilities are all industries that require special considerations for their electrical wiring. Heavy-duty applications and hazardous environments must use products built to resist corrosion. Chemicals, rain, snow, wind and other threats damage industrial wiring. As a result, good maintenance and repairs are imperative.

With a properly installed tray system, the next step includes teck cable. This armored cable with an exterior jacket, comes in nearly any combination of conductor sizes, voltages, and cores. Fiber optic, CAT6, and shielded twisted pair cables are available. These are usually color-coded based on their type. Teck cables can be pulled through cable tray, conduits, or buried underground. For buried cable, ensure that it is placed at the appropriate depth, protected by layers of sand, spaced properly, and that buried cable warning tape is conspicuous.

Some clients request protection for buried cables; therefore bricks, concrete slabs, or planks of wood are utilized. Where cables emerge from the ground, they should be protected by a PVC conduit sleeve. Teck cables must be secured to the rungs of the tray using approved Ty-wraps or cable clamps. This not only keeps cables neatly arranged, but reduces the chances of damage.

Once a teck cable has been fed to its destination, it is connected by use of a teck connector. These connectors serve two purposes. The threaded end puts tension on the cable by means of a rubber gasket, which holds the cable securely in place. In addition, a small metal star-ring inside the connector makes contact with the metal armor of the cable, bonding it to the connector. This is why, when preparing a cable for the connector, that 3-4 rings of cable armor are left exposed.

In locations with potentially hazardous or explosive gasses, explosion proof connectors must be used. They have a small internal chamber meant to hold an epoxy sealing compound. This seal contains an explosion in the event of a failure. In addition, it prevents gasses from traveling through the small gaps between wires to potentially non-hazardous locations where arcs and sparks cause harm.

Good working knowledge of industrial wiring applications is essential to ensure safe and reliable installation. Finally, with the use of heavy-duty materials, a facility can expect many years of problem-free service.

If you are deciding whether you want to install solar panels or not, there are a few interesting and enlightening facts to consider. Not only should you think about the cost of solar panels, which can be way more affordable than you realize, especially when you take in to count your electricity expenses going down considerably, there are a few other things to think about, as well:

If you are looking for solar panel installers, The Electric Connection, is here to be of assistance. Check out more of our solar energy blogs for more information about solar panel installation, installation costs and the benefits it can add to your own home and life in the long run.