As a homeowner, you have to make certain that the various parts of your home are not only in good working order, but also safe. Electrical problems tend to occur from time to time, and the flickering light is one of the most common. But why does this happen? What should do about it? How can you prevent it from happening? Our electricians offer outstanding electrical repair for such problems, and we can make sure that your entire network of indoor and outdoor lights operates just as it should.

There are plenty of reasons why your light may be flickering, but the most important factor to consider is that there is a gap in the electrical current somewhere. For any wall or ceiling-mounted fixture, there is both a set of wires that link that light into the circuit as well as to the wiring within the wall switch box. There could be a loose connection in either of these two place. It could also be related to a faulty socket, wall switch, wiring or even the light bulb itself. It should go without saying that flickering lights are not something to be taken lightly (if you’ll excuse the pun). Even relatively small issues such as this can result in fire hazards.

You’ll want to stay far away from any live wiring, and we don’t ever recommend you attempting to fix the issue yourself. Not only might you put yourself in harm’s way, but you could also damage nearby wiring and your home itself. What you can do is to check the light bulb. It could be something as simple as that, but you won’t know if you don’t check. If that’s not the issue, then it’s always best to reach out to a professional electrician so that the problem can be addressed quickly and correctly.

Hopefully, you have surge protectors set up in your house to protect your electronics from power surges, or voltage spikes, that can fry your devices. Unfortunately, surge protectors won't save you from the evil cousin of a power surge -- a low voltage event, or brownout. Dimming lights in your house are a sign that you're experiencing a brownout, which over time can cause major damage to your appliances. 

Since your air conditioner is one of your most powerful appliances, any brief outage means it takes a lot of electricity to power the unit back up. To combat the problem, Direct Energy and One Hour Air Conditioning & Heating® offer the Comfort Sentry Contactor, a switching device with totally sealed contacts that goes in your AC unit. If voltage goes below a safe point or "flickers," the Contactor will automatically and safely turn the unit off — and then back on once the right amount of power is back. "In multiple dwellings, it will stagger turning power back on, one in 30 seconds, another in 5 minutes, and so on — to avoid using too much electricity all at once. It's protection built right into your home," explains Dave Borowski, spokesperson for Direct Energy. A smart homeowner will recognize this as an "ounce of prevention."

When facility managers or building owners first start the search for new replacement lighting fixtures in their facility, it can seem like a long road ahead.

From all of the read this post where we talk all about what it is. From there, you can come back to this post and continue, it will really help you keep up! Now, let’s get into when high bay lighting is practical in both broad terms and specific applications it is best used in.

In broader terms, the most appropriate time to use a high bay lighting fixture is for ceiling heights that are between 20 to 40 feet high. For heights between 15 to 20, you typically are going to go with a low bay fixture, but that’s for an entirely different post. For anything lower, you will typically be dealing with tubes and panels lights, most often found in offices, hallways, and other similar type environments.

So for commercial and industrial type environments in which the ceiling height is 20 to 40 feet tall, a high bay lighting fixture is commonly the most chosen lighting fixture to install. That is the broad definition of when high bay fixtures are going to be used at the most optimal rates.

So, what types of high bays are often used and fit the purpose perfectly. Although these applications are highly relevant, there are some we have not listed and may have missed, but these are just a few of many very practical applications that high bays work perfectly in:

Gymnasiums

Think about your school gym, or even your warehouses often have tall ceilings due to storage space requirements, this need for space vertically makes their ceilings the perfect height for high bay fixtures.

Factories

Similarly to a warehouse, factories and production facilities need proper lighting to keep things safe and consistent. With proper lighting through installation of high quality high bays (such as with LED technology), you opt-in for better safety standards and higher consistency in your production efforts.

Airplane Hangars

Large airplanes call for large ceilings in the hangars and a proper lighting system is a must for this environment. When maintenance is required, you need clear and proper light to contact one of our professionals.

Did you know that your outdoor lighting installation needs maintenance every once in a while? It’s true! To keep your outdoor lights shining bright, there are a few things you should master.

Whether you’ve already got a bunch of outdoor lighting or if you’re a first-timer, there is plenty to learn in this checklist. And it’s really quick and easy, too!

Check Exterior Bulbs

The biggest headache for a homeowner is a bunch of burnt out bulbs. If you’re not prepared, it can really eat up time to get the right bulbs. But the solution here is to be prepared! When you first get your outdoor lighting installation, be sure to write down the bulb type for the fixture, and go grab some spares for later use.

After that, it’s all about anticipating need. But how can you tell if a bulb is about to blow out? There are some easy tells! Your bulb is close to bringing out if:

Keeping an eye out for these issues can be a huge time saver, and ensures your bulbs burn beautifully all year long. Just do a quick walk around once a week to check for these common signs!

Check Your Outdoor Lighting Wiring

During your light bulb check, do a quick look over for your wiring. If there are cuts, cracks, or missing bits of wiring, get them replaced with the help of a professional! Faulty wiring can be pretty dangerous when left alone, particularly if it gets damp or if the wiring is coming into contact with flammable materials. Damage is easy to spot, so as long as you’re looking for it, you’re gonna find it.

And that’s pretty much it! Any other issues should be handled by a professional for safety reasons, but these two things are the most common causes for exterior lighting failure. Feeling more confident about an outdoor lighting installation now? Contact the certified electricians at Kolb Electric to learn more about how outdoor lighting can benefit your home!