The electrical field is one that has seen a number of remarkable discoveries over the decades. One very important lesson has been the aspect of grounding of electrical currents. It’s true that we need electricity for almost everything in our daily lives and can’t even imagine a world without it. However, it continues to be one of the most dangerous elements on earth. If you haven’t already properly grounded your home’s electrical systems, you are taking a significant risk by not doing so.

Every electrical circuit has an active wire which supplies power; there is also a neutral wire which is responsible for carrying the power back. There is a third wire (grounding wire) that can be attached to the power outlets & the electrical appliances and devices; this wire is connected securely to the ground in your breaker box.

This third wire is the additional path that the electrical current can pass through to be safely returned to the ground, in case there is a short circuit; this prevents any harm being caused to anyone. In the event that a short circuit occurs, the current flows through into this grounding wire and it’s when you notice a tripped circuit breaker or a blown fuse in the electrical main board on your property. If this wire hadn’t been grounded, it would have resulted in a fatal shock.

This is one of the most important reasons to ground electrical currents. It’s the best way to protect your family members from electrical surges when they are operating any electrical appliances in the house. In case a lightning strike causes an electrical surge on your property it can result in extremely high electrical voltages in your system. When the wiring has the proper grounding, all the excess electricity gets diverted into the earth, rather than burning everything that’s connected to your electrical system.

When your installation is grounded, it becomes very easy for the power to get directed exactly to where you need it; this allows the electrical currents to efficiently & safely travel across your home’s electrical system.

A properly grounded system makes it much easier for the power to be distributed in the right amount to the right places. This plays a significant role in ensuring that there is no overload in the circuits. The earth becomes the common reference point for all the different sources of voltage in an electrical system.

One of the primary reasons why grounding is extremely effective in keeping you safe is because the earth is an excellent conductor, and electricity always takes the path that has the least resistance. When you ground your electrical system, you are giving it a path that it can easily take, rather than into you; this can potentially save your life.

If your home’s electrical system isn’t properly grounded, you are just risking the appliances and equipment that are connected to your system, being burnt beyond repair. If the situation gets out of control that can also result in a fire risking your property and causing physical injury, sometimes even death.

If you aren’t sure about whether your electrical system has the right grounding, its best to call in a reliable local electrician to get it checked thoroughly. We at AllRound Electrical will check the system carefully and check it for any other potential faults as well. For more information, contact our friendly team at this number – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

I have a great deal of interest in digital photography, but my life is as crazy as anyone else’s. My son, family, and work keep me busy from dawn to midnight every day. I’ve never had time to cultivate any photography skills, even though I’ve always been very interested, sitting on the edge of my seat, if you will, for a chance to take some digital photos in order to learn a little about how capturing light can create astonishing works of art.

My interview with Matthew Danser had given me my long sought “excuse” to try out some photography techniques. But it also required that I put in an honest effort. The thought in the back of my head: These photos are going to suck. Probably a lot. And they will most likely be seen by the thousands of people who visit this blog monthly. Second gulp.

But I’m the kind of person so riddled with ADHD that even my paranoia about being judged on a mass scale can only last about three minutes before the audacity to try anything resurfaces and action is taken. So here’s what happens when a total amateur who has no idea what he is doing tries to “Paint with Light.”

A one-dollar flashlight from – you guessed it – the Dollar General. One dollar. Even. Gotta love it. Especially since it’s all I could afford, seeing as how I’m still paying off the aforementioned Nikon that I bought to take photos of our baby son. (True, a million pictures have been taken of him during his first year-and-a-half on Earth. However, 999,999 of those photos were taken with an iPhone. Go figya.)

THE PLAN, STAN:

The plan was to wait until it was dark in the apartment and do some light painting. I knew that I could use the Shutter mode on my camera to set it to take exposures of up to thirty seconds. I saw that my camera also had an option for bulb release, so, invoking Danser, who recalls how his girlfriend had to hold down the button on his camera for a full thirteen minutes, I determined that if I asked really nicely, I might be able to persuade my wife to hold down the trigger to get exposures longer than thirty seconds. Otherwise, thirty seconds was my window of time to do all the light painting I could.

I started off pretty timidly. I had seen photos online in which people used long exposures to create squiggly lines. The most popular examples are pictures of traffic at night, headlights and tail lights streaming, giving you a sense of the fluid motion of busy intersections. You’ve also seen those nature pics in which streams and rivers and clouds and stars become gauzy with movement because of long exposures.

But what I really like about Danser’s work is the use of color. The effect of running inside the hut and popping off red-gelled flashes shown at the beginning of this blog post (Matthew Danser! And happy lightpainting, everyone!

The year of 2017 brings along more advancements in the commercial lighting space. And in a world in which things are changing so rapidly with lighting technology in virtually every way, it can be difficult to get everything you need to know in one place. For this reason, we’ve created this post in hopes of helping you get a rough guideline of the actual stadium lighting costs for the current year, 2017. Along with that, giving you the outlets to research more on the topic and get you one step closer to getting the most efficient and ROI focused technology illuminating your fields.

This post will be broken into two parts; the typical costs associated with the physical light itself and everything related to buying stadium lights. Secondly, the typical costs to powering your lights and how certain technologies may save you more money than others and how you can go about getting the highest return on investment when choosing a lighting technology and brand to go with.

To start off, we are going to cover the technical terminology of stadium lighting.

Firstly, stadium lighting is the simple term for high mast lighting. other technical terms, there are far too many to cover here. But, we think you should know the definition of lumens as we will be using it quite often. To explain, a Click here to view more about the pros and cons of both and which one is better for you.

All in all, it is too variable to give a definitive price to all situations. Keep in mind though, that a comparable LED fixture could cost double but, cut energy consumption by nearly 75% in some cases.

Since we seriously believe LED is the best option for stadiums and sports fields to illuminate their place, we are going to use that as our example (and recommendation).

Let’s keep it simple so you can use our example to get a rough idea what it will cost to run your lights.

Let’s say you have 10 lights. Currently, your high masts are metal halide and use 1,500 watts per fixture. Now, let’s say you are looking for a more efficient technology and you come across LED. You find a comparable light which will output the same amount of light (or lumens), and only consumes 400 watts per fixture.

In total, the metal halide lights are consuming 15,000 watts in total (when in use) and the LEDs would (if chosen) be using only 5,000 watts. That is 3 times less energy, which can lead to some great savings. This reduction from 1,500 watts to 500 watts per fixture is the exact reason fields both small and large fields are converting to LED over other technologies like metal halide and HPS.

For example, we often find that fields that convert to LED with us from metal halide or HPS high mast pole lights realize a payback of their investment in as little as 1 year. Additionally, since LEDs last much longer they get to realize these cost savings for much longer and thus; a much higher ROI over the lifespan of the light.

Additionally, since LEDs last longer they enjoy an additional benefit of less maintenance requirements. This allows more cost savings as an indirect benefit of LED high mast lighting.

Tips for Reducing Costs

We hope this post has answered your questions regarding most sports field lighting costs, if not, either use our contact information above or leave a comment below and a commercial lighting professional will personally reply to your questions and input.

Custom Electrical Services works hard to provide the best service possible to all of their customers.  We take pride in our work and the service we provide, always trying to build as much value into every project we help on.  We work with home owners and professional contractors alike.  Below is a recent review from one of our professional contractor customers.

“Custom Electrical is the Best electrical contractor in the Des Moines Area. We have used their services for the past 12 years and they are 100% customer focused, always show up on time, and perform their work in a friendly and professional matter. Doesn’t matter if it is the owner or anyone else in the organization, their service is top notch. We trust them with all our electrical needs” Kirk Mickelsen  KRM Development

Thank you Kirk Mickelsen and KRM Development for your continued support!

Categories: Electrician Review« Thank You Sharon D.!  |  Electrician In Ames & Surrounding Communities – Top Electrical Contractors »