Your electrical panel serves as the entry point for the electricity being provided to your home from your electrical utility. It also functions as an electrical safety device that will turn off an electrical circuit if there is too much current. Excess levels of electricity can lead to fire or electrical shock. Although you can often tell which circuit is malfunctioning by looking at your breaker box, it can make things much easier if you take the time to label all of your circuits or fuses. This way, you know which switch goes to which area of your home, regardless of whether or not that particular breaker has visibly tripped.

Most newer homes use circuit breakers in order to protect the different areas of the house. Some older homes, however, may still have fuses. If your home still has a fusebox, consider calling a local Pasadena electrician to inspect your electrical system. This is often the sign of an undersized electrical service. If you have a breaker panel, just follow the below steps to restore power to the area of your home that has been affected.

Excess electrical current passing through a circuit will cause your circuit breaker to trip, effectively stopping the current from flowing anymore. When this happens, the switch will move to a neutral position, which is between the ON and the OFF position. To return power to this circuit, all that you have to do is flip the switch all the way to the OFF position and then back to the ON position. Before doing this, it is good practice to turn off or unplug all appliances in the circuit.

Now that the power is back on, you can continue to use your circuit as usual. If you have continuous issues, however, you should call our technicians at The Electric Connection for assistance. We are always more than happy to lend a helping hand. You can also get more information through our website at www.theelectricconnection.com.

Investing in a home is no easy feat; it requires extensive planning and saving, not to mention patience. But at the end of the day, you will be happy that you made the decision. Because you’ve invested substantial time, money, and energy into make your home a place of solace, it’s important to ensure it’s safe and up to code. This is where we come in.

Every electrical company is going to be different, from the service electricians who come to your home to the quality of service they provide, and of course, to the types of services they provide. Make sure you choose a company who will always have your safety and best interest in mind at all times.

Should you elect to join our home protection membership for $9.95 per month, here are the VIP benefits you will reap:

Remember that peace of mind we mentioned earlier? Well, here it is! We understand the value of being able to rest easy knowing that no matter what, someone is always there to pull through for you and your family. Joining our home protection membership means having constant peace of mind.  Need first-rate service fast? We’ve got you covered with same-day service. Want competitive pricing? With our discount repair and replacement services, you’re guaranteed a cheaper price. We’ve always got your back – that’s a promise.

Crystal chandeliers have come a long way from the days as traditional, stately pieces only enjoyed in the most formal of spaces and positioned to impress guests in the dining room or the foyer. Crystal’s are found in various lighting applications of all shapes and sizes and their sparkling, elegant affect is energizing areas of the home from powder room and office to kitchen and bath.

More crystal means more cleaning, but it does not have to be too taxing. A few simple guidelines will help to keep your crystal chandeliers looking their best.

How to clean it

If you do not wish to remove the crystal components from the piece, you can use a spray. After the piece is sprayed, wipe off the solution with white cotton gloves. Crystal chandelier manufacturer Schonbek recommends a solution of one part isopropyl alcohol to three parts distilled water, while Waterford’’s chief lighting designer Billy Canning says hot soapy water will do the trick. Both agree that special cleaning formulas aren’’t needed.

“A real no-no in the area of cleaning chandeliers: …If the chandelier is adorned with a traditional polished gold finish or polished silver finish but it i’s not stainless steel, people will use these sprays that you can buy,” says Eileen Schonbek Beer, Creative Director for Schonbek Worldwide Lighting. “Basically, what the manufacturers say is you spray the chandelier and let the stuff drip off, that cleans the crystal. But in fact what it does is ruin the frames of the chandelier.”

If more aggressive cleaning is needed, the crystal parts will need to be removed from the frame. The crystals can then be hand-washed in soapy water, rinsed clean and dried with a cloth. Schonbek provides trim diagrams that detail reassembly of the chandelier.

For dusting between cleanings, Schonbek recommends using a feather duster, lambswool duster or a make-up brush.

How often to clean it

In general, crystal should be cleaned every two to six months. The frequency of cleaning required depends on where it is used and how easy it is to get to the piece.  According to Canning, extremely large pieces like 20-foot chandeliers can get away with being cleaned only once a year.

Since crystal lighting is being featured in virtually every room of the house these days, some pieces may need more frequent cleanings based on their location. Chandeliers used in kitchens will need more detailed cleaning due to oil and grease buildup, as well as dust sticking to the components due to moisture from sinks and stoves.

“The beauty of crystal, of course, is the prismatic refraction of the light passing through the crystal ornament,” says Beer. “So the minute it’s got any kind of residue of dust or even moisture — like in moist climates in Florida — the humidity will cause dust to adhere to the crystal and the salt in the air will kind of make it cloudy. So you actually have to clean crystal pretty regularly.”

Maintaining a regular cleaning schedule for crystal will always keep it sparkling. Yet if a piece is neglected, all it takes is a little extra effort with the methods listed above to make it shine like new.

“In my personal experience, I have been asked by many auction houses to identify Waterford products many times,” says Canning. “In most cases the difficulty with identification would have been that the chandelier was allowed to get dirty and the crystal would appear dull. But in all cases, when properly cleaned, they can look as good as the day they were bought.”

For the Chore-Challenged

For customers who aren’t ready to get into the nitty gritty of cleaning their crystal by hand, suggest the Da Vinci chandelier from the Geometrix collection by Schonbek. The crystals stay attached to a stainless steel frame that can be placed directly in the dishwasher. The Da Vinci is available in a 10-inch or 36-inch diameter. The only Da Vinci that will not make it to the dishwasher is the dramatic 5-foot model.

Diverse and impressive changes have been taking place in the lighting world this month. Read on to discover the fun and innovation!

In Lighting News…

Across the web, there was a consensus that LED holiday lights were the thing to have for the holidays. Not only are they energy-efficient, long lasting, and durable, they can also be interactive. We’ve seen families across the country creating Image via USA.Lighting.Philips.com

Other Cool Stuff…

In the last days of November, New York City residents were surprised by a light show atop the Empire State Building, synchronized to Alicia Keys’ “Empire State Of Mind.” The building’s new LED lighting system has over 16.7 million color possibilities, compared to the old system, which had only 10.

You probably know the iconic Pixar lamp – we usually see it hopping around before our movies start. Well, three students from Victoria University of Wellington have created a real-life replica of Luxo Jr., called Pinokio. With six servo motors, a webcam, some Arduino, and a bit of processing, the lamp came to life. Check out this video:

How about you? Any big lighting changes in your life this month? Please share!

Gas prices are on the rise as is typical for the summer weather. That means your commute just got a little more expensive. It isn’t likely you will get a pay raise to compensate for the extra money you will be putting in your gas tank. You need to do something different. Electric cars are an option and are becoming increasingly more affordable. However, to maximize the investment in an electric car, you will want to consult a Los Angles electrician like those at The Electric Connection.

The standard Level I charger that is typically included in the price of an electric car or added into the total price for an extra fee. Unfortunately, if you plan on driving your electric car more than 30 miles before recharging it, your electric car will not be quite as economical as you thought. Level I chargers will take about 24 hours to fully your charge the car. Unless you will be leaving your car in the garage for a full day, possibly more, it will not get the chance to charge.

There is an option with the help of an electrician. Los Angeles electric car owners can get the most out of their electric cars by buying a Level II charging station. Level II stations can charge an electric car in as little as six hours depending on the model. The faster charging stations require a 240-volt outlet. This is why you need an electrician. The outlet is not a standard fixture in a garage or carport and will need to be specially installed by a certified electrician. Before the outlet can be installed, the electrician will need to inspect the existing electric panel to ensure there is enough power to run the charger. Do what you need to start saving money on your commute by giving The Electric Connection a call today and scheduling your appointment.