Ever noticed a slight spark when you plug in an appliance? Maybe a bittle blue zip of electricity with a hair dryer, or a hand blender. If you’re not especially technology-savvy, this phenomena may give you a little fright! After all, when it comes to electrical appliances, wiring or equipment, everyone understand that when the sparks start to fly, it can be scary. So what causes a sparking outlet? Is it normal? Is it dangerous? Answers to questions like these and much more follow!

At Kolb Electric, we understand outlets to a tee. Allow us a moment of your time to teach you about outlet sparking, it’s causes, and when it’s time to be concerned!

To understand sparking and its causes, it’s important to know a little bit about how an outlet operates. You can essentially think of an outlet as a supply line, doling out the electricity allotted to your home in measured quantities per-circuit. In the United States, our outlets run a high, fast and hot current of around 115 to 240 volts.

The important thing to know about sparking is that in actuality, it always happens when you plug in an appliance. That fast, hot current floods the plug at the moment of contact, and for a split-second the connection is being established. This forms a spark! It’s just that normally, you either don’t see it, or it doesn’t persist.

As an important note, we at Kolb would like to say that any time you feel threatened or concerned about your electricity, contact a professional or the fire department. We don’t want to see you in dire straits, and assisting you is what electricians like us are here for!

Having said that, generally speaking, sparking outlets are a cause for concern if:

To prevent issues like these from arising, keep an eye on your outlets. If they get old (even five years can be reason to have them checked), consider having them replaced or serviced. As years wear on, the connections can loosen, causing arcing and large sparks. If your outlets are located near possible sources of water, have GFCIs (Ground Fault Circuit Interrupter) installed for added safety.

At Kolb, our primary goal is always the safety and satisfaction of our consumers. You guys are important to us, and if we can help keep you safe, you can be sure we want to do all we can! Call on our master electricians today if you have any concerns regarding a sparking outlet, or if you have any other electrical concerns!

One of the most affordable and effective components of any home security system is motion detecting outdoor lighting. Installed by a professional electrician, these lights can give you years of reliable service and peace of mind.

But like any part of your household electrical system, problems can arise from time to time. If your outdoor security lights are staying on all the time, not coming on at all or otherwise performing poorly, you can try these simple DIY fixes before calling an electrician.

Most motion detecting light fixtures allow the motion detector to be aimed at a specific area. If your lights are coming on too often, it could be that the sensor is aimed at a nearby street or an area where wildlife roam around at night. If the lights aren't coming on at all, the sensor might be aimed directly at the ground or into the side of the house. Experiment with different sensor positions after dark and walk around in the areas you want to secure to fine-tune your aim.

Motion detectors also typically come equipped with sensitivity settings. Too sensitive, and something as small as a fly could set it off. Not sensitive enough, and a prowler could come within a few feet of the fixture before it lights up. Locate this setting and fine-tune it to your liking.

Another common setting for motion detector lights is a light duration time. This can be as long as 30 minutes, and if your lights are unwittingly set this way, it could give the impression that they stay on all night. A good duration for most security light applications is one to two minutes.

A dirty sensor can’t detect movement properly. If dirt and dust have accumulated on your motion detector, use a wet rag to wipe it clean, then re-test your lights.

Security lights can get off-kilter if there are interruptions in the electrical supply, such as power outages, power surges and accidentally flipping light switches or breakers. Sometimes this can result in lights that stay on or off all the time. To reset most motion detecting lights, shut off the power supply at the switch for at least 30 seconds, making sure there’s no motion in front of the sensor during this time. Then turn the light back on and test it to ensure proper function. If there was motion in front of the sensor while the power was off, this may need to be repeated.

Not all motion detector problems can be fixed this easily. If you have persistent problems, storm damage or faulty installation, it’s important to call in your local licensed electricians for a professional evaluation and repair.

The smart grid can be thought of as national and personal all at once. On a personal level, the smart grid connects all of the electronics in your house, letting them communicate on an internet for electronics. This electronic internet also communicates with you via your smart phone or computer in real time, letting you monitor your electricity usage.

Your appliances will talk to each other and organize times of non-peak electrical usage for them to complete cycles that use a lot of energy. Your home will talk to you, letting you know if you’ve left your television running or if the light in the garage is still on.

On a national level, your home will be tied into the national grid like it is already, but two-way communication will happen with the power plant. If your home has solar panels installed by an electrician, any extra energy you produce will be sold to the power plant. The power company will be able to monitor your electrical usage too. They will use this information to create a picture of your neighborhood. This tells them exactly how much energy needs to be sent in your direction.

This system will be a replacement for our current power grid, and it will allow two-way communication between the power plant and your home. The meters for this system will report themselves. You won’t need a stranger tromping through your yard once a month to read your meter anymore.

This system will create a more efficient use of electricity by sending it where it needs to be. It will also report problems as soon as they happen. Before you could find a flashlight during a blackout, the power company will know exactly what wire went down and why. This will cut repair times. Since everything will operate more efficiently, there will be less cost to keep everything operating, which will translate into cheaper power prices for you.

Maintenance for your home will be easier. Having an electrician wire your house for this system will let you know exactly what your home is doing. If your water heater sees problems that could indicate a breakdown, you will get a text message alert. This will let you drain it before it turns your basement into a hot tub.

While you will need to replace your current electronics with applicances designed for this new grid, the cost will be worth it. The power grid will be more reliable, which means fewer blackouts. Your house can even report suspicious electrical activity to you, creating increased security. You may find yourself pressured to have an electrician install solar panels, but the power company will pay you for the extra energy. It will be an improvement for everyone involved.