By Tony Flynn | 06th Sep 2024
What is High Bay Lighting and its Uses
Popular industrial electrician - Top 10 Electrical Forums - If you consider a Metal Halide or High Pressure Sodium fixture, they typically consist of a large heat sink block at the top of the fixture that typically houses the fixtures ballast. And when selecting energy efficient options, its just as important to understand the technology and what it is capable of doing. 400 Watt Fixtures tend to be installed in ceiling heights no higher than 30 feet, 1000 watt fixtures are typically 40 feet or higher. Motions sensors and daylight controls that dim the light output based on occupants and the amount of daylight available in the space. Adding controls to a T5 fluorescent fixture is a good idea only if the ballast is designed to handle that requirement and not lower the life expectancy of the bulbs. High Pressure Sodium Bulbs are very low on the temperature color and have the warehouse aisles have the ability to focus the light where it is needed. Of the 3 type of HID bulbs, Metal Halide tends to be the best option. Below is an aluminum or acrylic dome and at the top of the dome is the HID bulb. Buying Guide on products, parts and accessories for industrial products, low voltage wiring, code compliance, inspections, troubleshooting. Interestingly enough, spacing of lights is similar to the height they are located off the floor. A High Bay Fixture, depending on the light source, can take on many forms and shapes. These bulbs typically come in two wattage’s, 400 and 1000. A light designed for a warehouse aisle is a lot different than a light designed for a gymnasium or a factory floor. Fluorescent can dim, but you need special ballasts for them. A fixture installed at 20 feet from the floor is installed in a 20X20 pattern, 30 feet in a 30X30 pattern, 40 feet in a 40X40 pattern. So knowing what you want to do and may want to do is important at time of purchase, because not having the proper equipment or options could mean a costly lighting warehouses, factories, gyms and readily available through the utility companies, and mass adoption means the technology of LED had matured to the point where the questions and disbelief of past years have gone away. Technologies such as metal halide and high pressure sodium are not a good choice as these technologies are not good at dimming or turn on or off quickly. In these spaces, a light that can flood the area evenly is important, in a warehouse aisle, a light that can light up the face of the shelves and the floor below is important
..More