Give your home or office environment a lift with new white lighting designs.  Bring in clean sophistication and timeless style: White on white illumination is perfect for the holiday season!  See the latest floor lamps, table lamps, wall lighting, chandeliers and home decor in a hue that looks fresh year-round…

1.  “Around the World” floor lamp from Van Teal, a striking 77-inch tall decorative tripod composition

2.  “Atilius” table lamp from Uttermost, tailored and elegant in Gloss White glass on crystal foot with a double-backed rectangular box shade

3.  “Spago” mini pendant from Fredrick Ramond, an artistic handcrafted woven metal orb of “Cloud” white surrounding an opal-etched glass shade

4.  “Cove Neck” White outdoor wall light from Nuvo Lighting, a handsomely combined mix of Asian and American style with textured glass

5.  “Walker” table lamp from Chelsea House, a dynamic white ceramic with Silk Egg shade

6.  “Sancerre” chandelier from Golden Lighting, stately in a White Gold finish with strands of delicately draped crystal beads

7.  “2 Seventy Series” island light from Nuvo Lighting, frosted acrylic spirals encase energy-efficient LED

Lighten up on Black Friday with new white lighting designs, chandeliers, lamps and home decor.  Visit 1800lighting.com for the best and brightest ideas in home decorating and illumination for the holiday season.

Low-voltage landscape lighting is a simple improvement that can make an enormous impact on the beauty and appearance of your home after dusk, as well as its safety and security. Installed along walkways, steps, and driveways, or directed up at trees, garden objects and walls, the typical low-voltage lighting system requires just three components: a transformer, low-voltage electrical cable, and the fixtures.

An electrical circuit works as a loop where electricity flows from a source and then returns to that point again after powering the device connected to it. The power flow interrupts or stops if the path is broken. There are also receptacles, fixtures, or switches joined to the course through different types of electrical wiring.

Every electrical circuit has a specific breaker or fuse that controls it. Inside the main electrical panel of your house, you will find reference numbers to identify which breaker or fuse is assigned to which circuit. Mapping of them is a standard electrical safety procedure.

power company supplies electricity to your home through the transmission and distribution lines. The energy enters the service panel, also known as the fuse or breaker box, after passing through a meter. Then, the box has three wires (hot, neutral, and ground featuring insulation of different colors) that do the jobs of transmitting the power to an external outlet, returning to the source, and providing the ground.

The wires of your home are generally installed in three ways:

It’s a wiring system where a single electrical circuit supplies power for several devices. There are various housing boxes from where both hot and neutral wires emerge and run along the route. They branch off to single receptacle and fixture.

It’s the most common of all the systems seen in residential settings.

Switch Wiring

Installed on hot wires, such a system has switches that either transmit or break the current flow to various devices or lighting fixtures. A switch changes its position to allow or interrupt the flow of electricity to electrical machines and instruments.

The system routes the hot wire through various fixtures before joining to the neutral one, which then carries the power to the source. It’s the least used and most inconvenient of all the types because it connects the devices, i.e., lights in a series. So, the circuit breaks off when just one light is burnt out.

Parallel wiring is the best option for household settings because it does not break even when one of the connected fixtures goes kaput. Nevertheless, remember not to run too many electronics from one source because each circuit can carry only a maximum electrical flow.

Are you looking for a way to dodge the cold this winter but still enjoy the outdoors? Then why not consider a hot tub! The experts at Kolb Electric can wire a hot tub for your home easily. But there are some things you need to know before beginning installation. There are specific limitations and home wiring necessities before you can relax in your new hot tub.

Got more questions? Contact the experts at Kolb Electric today!

If you’re looking to complete a hot tub installation in MD, VA. or DC, you should first understand the electrical requirements. Most hot tubs need a dedicated 240V, GFCI circuit to safely provide them with the power they need to run. To meet your hot tub’s electrical needs, you need to make sure your home is running on at least a 100 amp electrical service. Most homes built in the past 50 years or so meet this requirement, and many homes built more recently even exceed this, with 150 – 200 amp service. However, if you live in a historic home in the area, you may need to upgrade your electrical service before any hot tub wiring can be done. A licensed electrician from Kolb Electric can perform what’s known as a “heavy up” to get your home’s electrical service standards up to par for a hot tub installation in MD, VA, or DC.

If your home is ready for hot tub wiring, it helps to understand some of the guidelines that are outlined in the National Electrical Code (NEC), specifically ones dealing with hot tub installations. For instance, it is a violation of the NEC to install a hot tub under power lines. Additionally, you should avoid installing low-voltage lighting within 10 feet of your hot tub.

For all your hot tub wiring needs in Maryland, Virginia, and Washington, DC, contact the electricians at Kolb Electric today—877-287-1179877-287-1179 or click here!

Over the last several years, it has become more and more common to see solar panels on the roofs of houses in any given neighborhood across the United States. Although this technology has been around in a form very similar to its current state, why is it just now starting to catch on so widely? There are naturally a number of reasons why, including increased accessibility, government subsidies and rising fossil fuel prices. If you’re thinking about installing solar panels on your home, here are a few reasons why 2013 may be the year for you.

If you have been on the fence about solar power, take some time to browse through our resources (Read More). We specialize in options such as solar leasing, which can make solar panels a reality for almost anyone.