Whether it has to do with a simple home improvement or a more in-depth renovation, a permit for electrical work is required to obtain permission from the governing authority to go forward with the project. Permit pulling—requesting a permit from a governing authority, which could be State, County or City —can be challenging for homeowners who are not familiar with electrical plans. but the process of pulling permits for electrical work is fairly straightforward if you understand and meet all requirements for electrical contractors.

Each city, county and state can have varied building codes, so it is important to use a professional who is versed in navigating this process. Permit pulling requires first submitting an official application that includes a schematic of what electrical work is going to be done. There will be a permit fee involved to cover the application cost, the review and the inspection. Once a plan is approved, a permit will be issued, and work can begin. On-site inspections will be conducted to ensure that all of the work conforms to the permit as well as building codes and plans. Depending upon the size of the project, there may be more than one inspection, usually a rough and final or possibly partials of either. These inspections serve to protect homeowners from faulty or possibly hazardous work. A code official will come by at the project end in order to provide all required documentation. Final approval will only be given once full code compliance is met which could mean NEC, UBC or IBC regulations. If the homeowner is completing the electrical work as a do-it-yourself project, it may take multiple visits from the code official before a final approval is provided, depending upon the skill level of the homeowner.

My dad might just be the most difficult person I know to find gifts for. Unlike other dads, who might enjoy fishing, golfing, or watching football, mine rides and restores vintage motorcycles for fun. What’s so difficult about that? Well, there are only so many spark plugs and screwdrivers he needs, and only so many specialty parts I can track down before I’m in over my head.

That’s why I went out on a limb this Christmas, and decided to give him one of our

As you can see, the light’s long neck lets it curve and reach to illuminate the motorcycle’s body for detailed work.

This Valentine’s day, show your partner how deep your love runs for him or her by cleaning all the neglected kitchen appliances! Chocolates, flowers, and jewelry are nice too, don’t get us wrong. It’s just that serious cleaning says a lot about how much a person cares. By tackling these uncharted territories, not only will the love your partner has for you grow, you may even rekindle the love you once had for your home. That’s a whole lot of love going around.

Can you remember the last time you cleaned the inside of your refrigerator or behind it? It isn’t the easy appliance to maneuver around, so it’s likely that you haven’t cleaned behind it since you moved in. To clean your refrigerator, first pull it out so that you can mop up the dirt, debris, and gunk that’s been left behind. Then, vacuum the coils, which are located either behind or beneath your refrigerator.

All refrigerators are equipped with door gaskets to prevent cold air from escaping. If you have loose gaskets, read through your owner’s manual to find out the replacement part numbers. Your local hardware store should have gaskets in stock.

Make the outside of your fridge sparkle with a solution of equal parts water and white vinegar. If you have a stainless steel fridge, rub in the direction using either a paper towel or a soft wash cloth.

Now that the outside of your fridge looks brand new, it’s time to tackle the other not-so fun part, which is the inside. Clean all shelves and crispers. Perhaps you can use this time to throw away all your expired foods and beverages that you forgot existed.

Even if you have the luxury of owning a self-cleaning oven, some work is still required on your part. Using a solution of equal parts water and vinegar, wipe down the door hinges and frames. You can tackle the particularly rough spots with a some baking soda and a sponge.

How to Clean Your Stovetop:

Soak your burners with hot, soapy water for a few hours, and then scrub. The drop plate may be the dirtiest component of your stove. Before your scrub this area, use a vacuum to get out all the accumulated gunk.

To loosen up all the baked-on foods in your microwave, fill a microwave-safe container with water and heat it until it boils. Wait a few minutes before opening the door so that the steam can do its job; then wipe.

We know how counter-intuitive this sounds, but trust us – it’s a task that needs to be done! Your dishwasher works day in and day out to clean your dishes; it’s only a matter of time before all the gunk accumulates.

If your planning to cook dinner for your partner this Valentine’s Day, he or she will notice how sparkling-clean the plates are!

Is it time to replace your old dryer? Great news: The federal Energy Star program has started certifying clothes dryers, making it easy to pick out the most cost-effective and efficient models. Read on to find out what the change means and how to pick out the best model for your home.

Moisture and Heat Settings

The upside is clear: “ENERGY STAR certified dryers use 20 percent less energy than conventional models without sacrificing features or performance,” the program promises. So what took so long for dryers to get the federal efficiency stamp of approval?

“With dryers there are fewer major variables to manipulate — mostly it’s drying time and the amount of heat provided,” said Emilio Gonzalez, a Consumer Reports test engineer, so it was harder to find adjustments to meet the standard.

How did manufacturers finally find the extra energy savings?

The savings are not trivial. Energy Star claims that if every household in America switched over, consumers would save a total of $1.5 billion annually in utilities. The reduction in pollution would be the same as taking 2 million cars off the road.

Upgrade the Laundry Room

The first certified models are already available -- find a list of them on the Energy Star directory, which allows you to compare size, fuel type, energy use and other factors.

If you have a gas hookup in your laundry room, consider purchasing a gas-powered dryer. These models have a higher price tag but are more efficient across the board than their electric cousins. No matter what kind of dryer you buy, make sure you adhere to the following tips so you get the most for your money: