Pool lighting makes up a major part of your overall swimming pool costs, so it’s important that you figure out which type works best before you install them. The two major types of pool lighting are in ground lighting and above ground lighting, and your budget, needs, and preferences all factor largely into deciding which type to install. We’ll help you break down all types of pool lights to help you make the best choice for your Maryland, Virginia, or Washington, DC home—just keep reading!

One of the biggest benefits of in ground pool lighting is its streamlined look and even lighting. The two primary options for in ground pool lighting are LED lighting and fiber optic lighting (we’ll get into the pros and cons of each further down in this blog post).

Usually much cheaper than in ground pool lighting, above ground pool lighting is perfect for DC area homeowners looking to install a pool on a budget. There are a number of different ways to install above ground pool lighting, including:

Floating Pool Lighting

Floating pool lighting is exactly what it looks like. This type of pool lighting involves lights that bob up and down on the surface of your pool. It is available in a variety of colors and shapes, from orbs, cubes, and pods to more creative features like jellyfish shapes, flowers, and more. Floating lights can be solar powered and tend to use bright LEDs, but since they move around they don’t provide perfectly even lighting.

Magnetic Pool Lighting

If you have a soft-sided pool, magnetic pool lights are perfect for you. These two-part lights can be attached to the liner of your pool for an in ground pool lighting appearance with above ground ease.

The two major types of in ground pool lighting are LED and fiber optic, and each type has its own advantages and disadvantages for homeowners in Maryland, Virginia, and Washington, DC. Consider the following:

LED lighting – LED lights are housed in waterproof bulbs that can be removed to change the bulb. The bulb itself should last around 10,000 hours, however, so you won’t need to perform even this simple task very often. One to two bulbs should be enough to illuminate your entire swimming pool.

Fiber optic lighting – bulbs for fiber optic pool lights are located out of the water, making them even easier to access and replace than LED pool lights. To illuminate a whole pool, you’ll likely need more than one fiber optic light, though, which can get expensive.

LED lighting – LED lights range from $400 – $900 installed, and bulbs can last anywhere from 10 – 15 years. Replacement bulbs will run you about $200 – $400.

Fiber optic lighting – a fiber optic pool lighting system will require a fan to keep the light cool, meaning fiber optic pool lighting will be more expensive than LED lighting—think anywhere from $900 – $1,500 per bulb system. Bulbs typically last about 3 – 7 years, and replacing them will cost about $200 – $300.

LED lights – despite having the lighting components under water, LED lights are very safe and have a very low risk of failure. In addition, LED lights use very low voltage, which mitigates the risk further.

Fiber optic lighting – since there are no electrical components housed in the water, fiber optic lighting has close to zero risk of electric shock.

LED lights – LED lights can be used to fill your whole pool with light and illuminate the whole thing at once. They can also change colors to create a truly unique look for your backyard.

Fiber optic lighting – these types of pool lights aren’t as good at illuminating the whole pool at once, but they can create points of light to give your pool a sparkling, starry appearance.

In purely practical terms, LED lights have the edge over fiber optic lights—they are less expensive, easier to maintain, and provide much brighter illumination. But there are advantages to both types of pool lights, and Kolb Electric can help you find the perfect fit for you and your home. We can also provide you with further pool lighting tips here.

Ever considered utilizing solar energy in your Maryland home? If not, you might give it a glance. Not only is solar energy tech really quite cool, it boasts some unique benefits as well. But, of course, like any decision you make about the home, it all really boils down to its effectiveness, and possibly more importantly, the cost.

At Kolb Electric, we want to bring you all of the latest information and tech! Our team is excited about the advent of solar energy, and sharing what we know is just part of the superior service we provide.

When being used? Practically nothing, aside from maintenance. For solar energy, it’s all about the installation. While solar power isn’t exactly a new thing, implementing it in a larger capacity in United States homes kind of is. In a mainstream sense, at least. Preppers, ingenuitive farmers, and tech nerds have been using it for years.

So, as a reasonably newer need, solar tech installation, such as panels and solar-supported equipment are understandably rather expensive. Assume your home uses the US average amount of electricity (between 600 and 800 kWh) per month. With this estimate, assume you’re wanting you fully solar your home.

You’d be looking at anywhere between $20,000 to $40,000. Do understand that this is a very broad estimate, as individual factors about your home can lower or raise that drastically. There is an endless number of variables involved here, including how much power you want, how large your home is, your solar energy needs, etc.

You would also have to take into account maintenance, as solar equipment will require very specialised training and tools to keep working at maximum potential. Bottom line, how much does solar energy cost? Next to nothing, if anything at all. The equipment, on the other hand, we…it’s an investment.

But Is Solar Energy Worth It in Washington, DC?

Above is a map of average energy savings in the US, courtesy of Energysage.

Depending on exactly how you’re going to utilize the solar power, probably yes. Especially (and almost exclusively) if you intend to make your current home permanent. As in you plan on staying there for fifteen, twenty years. To find more exact answers and suss out whether solar power might be something you’re interested, we would highly recommend consulting an energy specialist.

Need superior electrical services in Maryland, DC, or Virginia? Contact Kolb today!

As a DFW area electrician, providing electrical services throughout Plano, Garland, Richardson, and many other areas around Dallas and Ft. Worth, ElectricMan’s reputation has been built around professionalism, customer service, and reliable Home Electric Repair.  When you come across an electrical problem in your home, of course your first thought is “I need an electrician”, but which Dallas Electrician should you choose? With so many “fly by night” businesses around these days, how can you be sure that the one you choose will be the right company for the job?

The value of a guarantee is highly important, and to prove his commitment to his guarantee of excellent customer service, owner of ElectricMan Inc. and Master Electrician, Nick Schaeffer, provides the following promise:

“As the owner of ElectricMan Inc., I am so confident in our ability to satisfy our customers’ needs that I am including my personal mobile phone number here to ensure that our high level of customer service is never jeopardized.  If you ever have any concerns regarding the level of service, or the quality of the work that you receive from ElectricMan Inc. please do not hesitate to reach out to me personally. You can reach me, Nick Schaeffer, Master Electrician and Owner of ElectricMan Inc., at 972-898-8098. I will always be happy to do everything that I can to make your experience with my company an enjoyable one.”

The guarantee that ElectricMan Inc. provides is about not only quality in Home Electric Repair, but also in the quality of the technicians that they send to your home or business, and the assurance that your electrical repair will be performed using the correct techniques following all current electrical guidelines and safety codes. The key factor in choosing an electrician is finding one with the experience, track record, and personal accountability to provide the service that you, as a customer, deserve.

The good news is that heating systems in modern homes are safer than they’ve ever been before. But while many people never experience any major risk to their safety due to a furnace or boiler, it’s still a possibility. Any heating system that uses combustion to work, like a natural gas furnace, could potentially leak a dangerous gas called carbon monoxide (CO, for short) into the home.

The heat exchanger is where combustion produces a flame as natural gas ignites. This heat is contained within a heat exchanger made of aluminum or steel. It is essentially a curved tube, and the smoke and carbon monoxide byproducts vent through the other end and out of the house. Air blows over the heat exchanger to heat up and is sent to the ducts running throughout the home.

Unfortunately, over time, the heat exchanger can become damaged. This is especially true if you have anyone but a professional technician work on your furnace, but it can also happen with time. You should have HVAC technicians inspect your heating system each and every year to check for leaks and cracks.

Carbon monoxide is an odorless, colorless gas. That means you wouldn’t have many ways to notice if it were in your home. It is poisonous, and sometimes people don’t know about it until people in the house start to get sick.

Carbon monoxide detectors save lives. A CO detector near each room where people sleep (and throughout your living spaces) should be tested each month and replaced every 5-10 years. You should also replace the batteries for your CO and smoke alarms every 6 months (even if the test works).