We’re excited to announce that we now offer Printed LED Panel Lights for custom backlit signs, trade show and exhibition displays, product advertisements and branding, mobile displays, logos, and so much more! Our user-friendly panel building tool lets you configure a panel in four easy steps. Simply choose your ideal panel size, upload or select an image, edit your image, and choose a frame. You’ll be able to see your panel as a finished product with all chosen options. Compatible accessories will be listed before you reach the checkout page.

There are many aspects of our Printed LED Panel Lights that make them unique. Check out the information below to see why they’re so special.

We offer three types of panels: wall-mount, stand-alone, and 12-volt. These LED panel lights are available in a variety of sizes and are designed specifically for their intended applications.

Stand-alone panels come with a plug and a wire enclosure box. They can be used almost anywhere for any purpose from backlit signs for product showcasing and branding to window signage and custom logo displays on desks and shelves. These panels are available in 2′ x 2′, 2′ x 4′, and 1′ x 4′ sizes.

Most people have experienced a circuit breaker trip at some time or the other; and the first couple of times it happens, it can be quite alarming. However, this is a very important safety component in any electrical circuit. A circuit breaker is essentially an automatic device used to stop the flow of current within a circuit, as a safety measure. It is specifically designed to protect your property, equipment in your home/commercial space and you from overloading the electrical circuit.

The sole reason a circuit breaker trips is to prevent the overheating and overloading of an electrical circuit, beyond the capacity of that circuit. If there is no breaker in place, the electrical units in that circuit can get damaged and potentially lead to a fire.

In case a circuit breaker trips, the very first thing to do is to locate it in your panel box. The switch you are looking for is the one that isn’t completely in an On/Off position. Once you turn the switch into the ‘on’ position, the power will be restored. In case the power doesn’t come on, simply switch it off and then on again.

If the circuit breaker trips even after you have reset it, don’t just try resetting it again. It’s doing what it’s designed to do and telling you that there is something wrong that has to be investigated. There are three different things that can cause a circuit breaker to trip:

This is the commonest cause of a circuit breaker trip. It occurs when the electrical energy that’s flowing through the circuit is much more than what it can handle. The simplest way to solve this problem is to redistribute the power to some other circuits. Very simply put, in case too many heavy appliances are connected to a single circuit, move a couple of them to one that isn’t as loaded.

It’s important that you check whether the circuits aren’t loose. First, switch off the power and look for any loose wires; you can do this by closely inspecting the hot wires and outlets that lead from the service panel to the circuit breaker, and then tighten the connection that’s loose.

If after checking the circuit overload, you find there aren’t any issues in that areas, the problem could be a short circuit. This is caused when any live wire touches another neutral/live wire. At times a short circuit may be caused by a broken wire within the breaker. It’s far more difficult to identify this as it could be just about any part of the wiring system which is connected to that circuit. At times, the culprit could be an appliance that’s plugged into an outlet.

This issue is quite a dangerous and severe one and it’s important that it be diagnosed quickly. It can be quite tedious to look for a short circuit and the outlets, plugs and wiring that are connected to that circuit, but these checks are important. Look for cracks or signs of burning in the insulation and call an electrician without delay.

If it’s neither a short circuit nor a circuit overload that’s caused the circuit breaker to trip, it could be a ground fault issue. This happens when any hot wire touches the metal outlet box or the ground wire.

If a circuit breaker trips in your home or commercial property, keep in mind that it’s a very serious issue and not something that should be ignored. For the best electrical solutions, call Allround Electrical at 1300 169 263. You can also drop us a line via email or contact us through this online form.

Thanks for reading,1300 169 263

You may not think about it often, but the power coming into your home travels a long way before it gets to your refrigerator, air conditioner, or any of the other appliances in your home. On the way, electrical current encounters fluxuations and interference from things like other appliances, machinery, and low quality wiring. That “Dirty” power can cause inefficiency and disturbance in your appliances, making things like the motors in your refrigerator and air conditioner, the circuits in your television, and all of your other electrical gadgets work harder than they need to, and wear out faster than they should.

A Power Conditioner will take the electrical current coming into your home and “clean” it, using filters to isolate power outlets and remove interference. This provides the correct voltage level to sensitive electrical equipment, allowing it to work safely and efficiently at the correct voltage.

Because power conditioners help your appliances run more efficiently, they can also lower the overall cost of running these appliances, and extend their lifespan. For more information about home power conditioners or for help on any electrical project in your home, please reach out to www.electricmaninc.com

Warm weather and clear skies means it is finally barbeque season once again! May is National Barbeque Month, and we are definitely in the festive spirit. But before you get ready to fire up the grill and bust out the pool rafts, make electrical safety a priority. It might be time for an outdoor outlet upgrade to keep your parties running smoothly this summer.

So just what do you need when it comes to outdoor electrical outlets? Make certain to have ground fault circuit interrupters (GFCIs) installed outdoors for your outlets to protect from serious electrical problems. It’s also always a good idea to have additional outlets installed if possible, especially if find yourself running extension cords across your deck that have become a safety hazard.

Don’t overlook the manual warning of certain appliances that say “not for outdoor use.” It’s always safer to double-check before running into a problem later on. Make sure that electrical appliances are unplugged and turned off when not in use or left unattended.

Just like your outlets and appliances, extension cords need to be rated for outdoor use when you are using them in your backyard. If you must have extension cords running across your backyard during a barbeque, make sure to keep it out of the walkway and away from where children will be playing.

If a rainstorm begins while you’re working as a master chef outside on your electric grill, don’t be a hero for the burgers. Stay safe and head into the kitchen with a backup plan to avoid the risk of electric shock.

Don’t kick off barbeque season without getting pools and spas inspected by an electrician who can make sure you’re backyard is safe and ready for the summer. This is also a good time to make sure you know where electrical circuits and breakers are in case of an emergency.

If you need any help making your backyard barbeque-ready, our professionals can make your electrical renovations and fix-ups a breeze.

“SOLID” was the word Ken used to describe himself.  He is a man of character who always finishes what he starts and keeps his word.  A true humanitarian and dedicated businessman, Lebersfeld accepts this award with humble gratitude.

He continues to work six days a week, providing a “solid” foundation for his employees, as well as his younger siblings and cousins who work at Capitol Lighting.  They know–if there is a problem, whether personal or business–Ken would be there wholeheartedly and in full force.  He does nothing half-way.  And, perhaps that is why he is at the helm and has become the strong-hold of a family lighting business that has strived to be the best for over 90 years.