Department of Energy. In the summer, keep your thermostat at a minimum of 78°F—no higher. And in the winter, try 68°F.

Most people are actually perfectly comfortable at this temperature—more so than they may think. When elderly relatives or small children live in the home, these settings may not be possible, but they can help most people save money while they are home.

Here is one of the most common misconceptions about heating and air conditioning systems: turning down the temperature all the way will help the home cool off faster, and turning the heat up as high as possible warms a home faster. This simply isn’t the case.

With time, lower temperatures will make the house colder, but it won’t happen any faster. Your air conditioner runs nonstop to reach the setting on the temperature, which is less than what you need to be comfortable. Then, you end up paying way more than you should, and you may not really be comfortable.

The same is true when you continuously get up to adjust the thermostat settings. The AC/heater simply becomes overworked, and this is something you want to avoid. Use your programmable thermostat to keep temperatures stable instead.

When you leave the home, it’s important to use the programming settings on your thermostat to keep temperatures about 10° lower (in the winter) or higher (when it’s hot outside). This way, you don’t waste energy cooling or heating a home that is unoccupied.

However, you don’t want to change the temperature by too much. Let’s say it’s summer and you are away for the day. You shut off the AC completely and turn it on when it gets home. Now, the air conditioner has to work hard to get back up to speed, which may use up even more energy than keeping it at a higher temperature for the day.

Many people are unsure of how to effectively use their thermostats for energy efficiency. Get to know your thermostat by spending some time reading the thermostat. You may be able to use programming options to set different schedules on weekends and weekdays, or to make changes throughout the day.

If your thermostat is over 10 years old, it may be time for a new one. New smart thermostats allow you to set schedules or make changes directly from your smartphone. Ask a local technician about your options.

For the photo shown to the right, taken at night in a Texas ghost town, Danser assembled the following items: a powerful, handheld LED light; his Canon 5D Mark iii camera and Canon 16-35 mm L lens (at 16mm); Canon 580ex 2 flash; a red gel (piece of red cellophane to color the light of the flash); a tripod; and his girlfriend’s finger (to graciously hold down the shutter release button because he forgot his bulb release at home!).

Danser told Pegasus: “So, I set my camera on bulb mode and had my girlfriend hold down the shutter release button for 13 minutes, while the camera was very sturdy on the tripod. The place was pitch black except for the stars and the moon (very little ambient light pollution in the desert). As my girlfriend was keeping the shutter open, I walked to one side of the structure and methodically shined my flashlight (rated at 2000 lumens, so it’s pretty bright) all along the exterior and front facade of the building. This lasted for about five minutes before I turned the flashlight off and ran to the other side of the building and ‘painted’ for another five minutes.”

Danser said that one of the important tricks of light painting is to show off the textures of the buildings by shining his LED flashlight at an angle instead of from the camera position.

After “painting” the sides of the building for five minutes each, he ran inside and popped off about 10 red-gelled flashes to create the effect of a warm glow pouring out of the building.

When asked how he was able to run in and out of the building without showing up in the photo, Danser simply replied that “The camera could not ‘see’ me because I was moving quickly, and there wasn’t enough ambient light to expose me in the picture.” While popping off the gelled flashes in the building, he always made sure he was not visible to the camera.

After 13 minutes at an aperture of 2.8, Danser was able to get an excellent exposure of the night sky while having ample time to do all of the “light painting” that he had planned beforehand.

Soon I hope to try some light painting of my own with less expensive equipment to show you how anyone can adopt Danser’s technique. After all, light can be used in all kinds of art and photography projects.

In the meantime, check out this Danser’s website to see tons of beautiful experiments playing with—and painting with—light. Thanks, Matt!

It’s a new year, and many of us have resolved to finally do what makes us happy. To stop coming up with reasons not to do the things we want. Of course, this time of year also brings many to the crippling realization of just how much they spent over the holidays, and how much they need to save in the new year.

Good lighting, beautiful lighting, new lighting in your home can really work miracles for the space’s look and feel, and even your own well-being. But, when trying to save money, springing for new lights can feel like too much of a luxury. How do you know when it’s worth it?

We’ve put our heads together here at Pegasus Lighting to come up with the 8 best reasons you should say YES! to a lighting upgrade:

1. You’re wasting money. 

It's safe to say that few people actually look forward to doing laundry, and when you have a poorly functioning washer and dryer, the process is only made all the more painful. This is especially true if you live in a space where you have to share your laundry machines with others and are forced to pay for every load you wash. Sending your clothes through a dryer twice is a waste of quarters that you could be saving for your next load - not only that, but running your dryer more times than you need to is sure to start taking a toll on your electric bill.

You have a few options that you can look into to address this issue. If your dryer isn't heating up as much as it should be to actually remove the moisture from your clothes, don't jump to the conclusion that you need to replace it. Many homeowners will make the mistake of buying new appliances, spending hundreds of dollars picking out a top-of-the-line model, only to find that it too isn't adequately drying your clothes.