The end of the month has arrived, along with that same old utility bill. The cost of electricity can be a huge dollar amount, especially in larger homes with larger families. The utility bill has become just a part of life. Driven by the energy consumption of fridges, washing machines, lighting, and so much more, the electricity consumption of your home is dependent upon many things that often cannot be helped. However, there are a few household items that take up a surprising amount of electricity that you may not have thought about! Changing the way that you and your family uses these 5 common items could actually make a difference in that monthly bill in your mailbox! Here’s a list of these sneaky electricity users and some suggestions on how to decrease their energy use.

Personal electronics are a part of our everyday routine, whether it is our smartphones or our laptops. There’s no avoiding charging your device, but between 100% battery life and the idle time it spends charging afterwards, it becomes a major energy consumer. Leaving your cellphone or your laptop plugged in after it has reached a full charge still pulls in a decent amount of electricity. This does no good for your electricity bill, and it actually is worse for your device as well. Leaving your electronics plugged in past the full charge does damage to its long-term battery life.

The Solution: Immediately disconnect your electronic device from its charger when it gets to 100%. Unplug the actual charger, then do it all again when it’s time to charge again. Don’t plug in your devices at night when you go to sleep—that’s 8+ hours of idle charging time that racks up the dollar signs on your electric bill.

Xboxes, PlayStations, Wiis…the number of consoles that are available grow every day, providing entertainment and family fun. However, whenever those devices are on and not being used, it sucks up a lot of electricity to keep it powered.

The Solution: If you’re going to step away, turn the console off. Never let it linger and go idle, as this can use unnecessary energy. Unplug these devices when you travel, as well.

Surprisingly, your DVR or cable box can use as much energy as your refrigerator: one of the largest energy consumers in your home. These devices are always in standby, waiting to be used, which means that they constantly pull in energy just in case you press the On button on your remote. So not only do they use energy when they are on as you are enjoying television, but they are also using energy when they are off.

The Solution: Like the consoles, turn off the TV when you step away. Then unplug the actual DVR or Set-Top boxes when you know you aren’t using them or are traveling for a period of time. This could save you quite a few dollars on your next bill.

Summer time in Colorado means lots of dry heat. Especially if you do not have an AC system, like most older homes and apartments have, then ceiling fans are your only source of cool air. However, when they are big electricity users, so if you can help it, switch them off.

The Solution: Don’t keep the fans on for long periods of time, like when you are out of the house, or at night time when you’re sleeping. You could also upgrade to a more energy efficient model of ceiling fans, which could save you some money as well.

Just like DVRs, microwaves use energy both when they are on, and when they are off. When you’re not using your microwave, it sucks in constant amounts of energy to keep the buttons lit and the clock on. Then the energy levels jump to an all-time high when they are in use.

The Solution: Unplug your microwave when you’re not using it. Keep electricity levels low by only using the microwave when necessary. You could do this by doing things like avoiding defrosting meat in the microwave—letting it sit on the countertop for a few hours instead.

Though they seem small, these 5 household items are mighty when it comes to electricity use, even when they are not being used. If you’re trying to cut down your electricity bill, or want to be more energy efficient, these small changes in the way that you use these everyday items could make a huge difference in the long run.

The term “light box” can mean a few different things, but from a lighting perspective it typically refers to a backlit display panel. Light boxes are most commonly used for advertisements or other commercial displays. You’ve probably seen them in trade show booths, restaurants, airports, nightclubs, offices, hotels, museum exhibits, and retail shops. That’s right, light boxes are everywhere.

One of the most common uses for light boxes is the commercial advertisement. You see these in large spaces like terminals or outdoors at bus stops. They capture the attention of passers-by and create lasting impressions. The light box pictured below is one of the biggest I’ve ever seen.

One of the most obvious places you’ll see light boxes are along the walls inside and outside of movie theaters. Sometimes lines of light boxes stretch incredible distances, advertising all the movies being shown in large theaters.

In fact, light boxes can be a fun addition to any home and can be used for as many purposes as you can imagine. Sure, you could illuminate a movie poster of your daughter’s favorite movie. But you could also make a custom sign saying whatever you want. I really like the light box below, created at home for home.

Have you thought about what more you could do to keep your family safe at home? Maybe you already have a security system and you lock your doors and windows every night, but what about dangers within the home? Sometimes, accidents just happen and there is really nothing you can do to prevent them. Home fires can happen in new homes or old homes. While wiring inspections can typically identify some problems and prevent an electrical fire, there are plenty of other things that can go wrong that can cause a fire. Your best way to keep your family safe against these kinds of accidents is by being prepared with working smoke detectors. Your electrician in Santa Monica can help you add a layer of protection in your home. You can talk with one of the team at The Electric Connection to learn more or read on.

There are two different types of smoke detectors. You are probably most familiar with the cheap battery-powered detectors that can be placed anywhere you like in the house. The other option is detectors that are hard-wired into your home’s main Santa Monica electrical. These detectors do have battery backups in case of a power outage. The biggest, and probably the best difference between the two is the reliability of the hard-wired detectors. That and the hard-wired detectors are all interconnected. Meaning, when one alarm is sounded, each detector in the house will go off alerting the occupants to the fire.

This can add minutes to a family’s escape time, which is extremely valuable in a home fire. The extra minutes can also mean the difference between saving the home or losing it to the fire. The additional minutes will give the homeowner the chance to call emergency services before the fire is out of control and if it is small enough, be able to use an extinguisher to put it out before it spreads. Call The Electric Connection today and schedule your hard-wired smoke detector installation.