A problem so many people deal with and assume there is no real solution to is bathroom lighting needs in the dead of night. Turning on the light to take care of business can be too much. It is too bright and ends up blinding you before waking you completely up and making it next to impossible for you to fall back to sleep. You may feel like you are forced to choose between complete darkness or too much light, but an electrician in Burbank has another option. The reliable team at The Electric Connection wants to help you take care of your bathroom lighting woes.

Under the Cabinet Lighting

You can add some light to the bathroom without making it completely by blinding by placing it low to the ground. A rope light placed under the lip of the bathroom counter near the floor adds just the right amount of light in an area where you really need it. This is a quick and easy job for an electrician. Burbank homeowners will appreciate the effect the soft lighting gives the room as well as its usefulness.

Outlet Nightlights

These are very handy and shed just the right amount of light over the sink area. The lights are attached inside the outlet cover and do not require the services of a Burbank electrician. The lights work on a sensor and will automatically turn on when it is dark.

Lighted Toilet Seats

These may not be quite as practical, but they are certainly very neat looking. It isn’t the actual seat that lights up, but the hinge of the toilet seat. The soft glow of light illuminates the bowl and gives a person a little direction.

If you would like an electrician to take care of these small bathroom lighting jobs, give The Electric Connection a call today and schedule your appointment.

constant-current LED driver or constant-current driver is used to regulate the amount of current that is supplied to an LED or LED array to maximize LED lifetime. If current is not regulated, LED brightness can fluctuate and life span can be shortened. The constant-current driver is used for LEDs or light fixtures that require a stable output current and operate within a range of voltages. Most finished LED products already have a constant-current driver or resistors to regulate current. If you’re building an LED fixture or replacing a constant-current driver, it’s important to verify that the output current and voltage of the driver is compatible with the LEDs’ current and voltage. If your LED product already has a constant-current driver or uses resistors in the LED array, you might need a constant-voltage power supply.

If your LEDs are dimmable and you want to change their brightness, choose a Magnitude Dimmable Power Supplies. These dimmable power supplies work by varying the power on the AC input side of the power supply by means of a TRIAC dimmer. This change in power on the AC input side will vary the voltage on the DC output side and control the intensity of the LEDs. TRIAC dimmers are common hardware store and household dimmers, which include brand names such as Lutron and Leviton.

Pulse-Width Modulation Dimming: Pulse-width modulation (PWM) dimming can be used to control dimmable power supplies such as Mean Well LPF Series. This type of dimming control adjusts the output current based on the duty cycle. As the duty cycle increases, current will increase and the LEDs will be brighter. Conversely, if the duty cycle decreases, the current will decrease and the LEDs will be dimmer. Pulse-width modulation for these drivers is based on a 10-volt signal level with a frequency between 100Hz-3KHz. The MLD-5A are compatible for this application.

Resistive Dimming: Resistive dimming can be used to control dimmable power supplies such as 12-Volt Mean Well HLG-40-240 Series or 12-Volt Mean Well HLG-600 Series or here.

The efficiency of a power supply or driver indicates the percentage of power that goes toward making your LED product function. An efficiency of 80 percent or higher is recommended for operating LEDs. 

When choosing a driver or power supply, the size of an LED product’s housing or area of installation is important. If you wish to put a constant-current LED driver inside of a product, the driver must be small enough to fit in the product’s housing. Similarly, if the driver or power supply is used outside of the product’s housing, it should fit the area of installation. Drivers and power supplies are available in a variety of sizes to suit your needs.

A Class 2 driver or power supply is in accordance with limited power levels defined by the National Electric Code (NEC) and fulfills the requirements of Standard UL 1310. Output is limited to 60 volts DC and 100 watts. Because power sources with this rating have limited output, it might not be possible to power as many LEDs or lights as those that don’t have a Class 2 rating. However, these power supplies and drivers provide protection from fire and electric shock.

A Class II rating refers to a double insulation layer between AC input and DC output wires. These drivers and power supplies do not require a ground connection.

Fun Fact:  A traditional New Year’s Eve religious service, “Watch Night” is observed to give thanks for life’s blessings and pray for divine favor in the coming year.  “Watch Night” was especially significant among African Americans in 1862, as President Lincoln vowed to end slavery with the signing of the Emancipation Proclamation on January 1, 1863.

Wherever you happen to be, New Year’s marks a time for change, a time for making resolutions and a revival of hope.  Make a life changing resolution; Visit a Capitol Lighting showroom and work to improve your future illumination.  Rejoice in unbeatable promotional pricing on the year’s finest home lighting and accessories, including shining innovations from Forecast, Hanover Lantern and Thomas Lighting.