If you want to achieve flexibility of loading different electrical appliances in your home, implement the following approaches. The electrical conduits practices recommended here meet NEC guidelines guaranteeing proper load growth for both commercial and residential buildings.

If you expect the load on your house, office, establishments, or other buildings to increase in future, consider using at least 12 AWG conductors. Ensure that they have protection of 20-amp circuit breakers and are designed with a 15-amp load standard each.

In addition, consider implementing these measures on wires and cables to increase the optimal performance of your circuit conductors.

To allow the normal length of lamp cords and other wire cables, the NEC Code recommends more than six feet of distance between the point on a wall and an appliance receptacle. In applications such as kitchen countertops, electricians should wire receptacle outlets some twelve feet or four feet apart.

The biggest challenge here is the difficulty in predicting how items such as furniture in your house will be arranged. Additionally, there may be an inadequate number of outlets at various locations. Evidence for this can be seen in the outlet power strips that today’s equipment use.

In locations where you can expect a huge load, such as computer workstations, offices, and home entertainment, the use of Quadruplex receptacles is an ideal solution. Reducing the number of receptacles that a single circuit uses will limit the installation and use of sensitive equipment. It also positively affects circuit conductors, voltage drop, chance of interaction, and reduces the likelihood of harmonics accumulating to harmful levels.

If your home has a large kitchen and multiple bathrooms, you need additional circuits that go beyond the minimums of the NEC Code. This effectively maintains the high-capacity appliances that characterize these rooms.

In addition, limit the number of use receptacles per circuit. For example, a 15-amp circuit can run 1800 Volt Amps when working at 100 per cent rate. While NEC recommends using circuits at 80 per cent rate, this translates to 1440 Volt Amps.

For some reasons, NEC requires a high number of circuits for use in most commercial and residential buildings. The Code recommends that sensitive electrical appliances, high-capacity loads, and equipment that cause poor quality of power obtain power from individual circuits. This separation eliminates the interference with equipment on a common circuit.

Where individual branch circuits are installed, the harmonicas generated in other circuits are shielded from coming in contact with sensitive equipment. In addition, this prevents the high neutral currents from sensitive electronic appliances to those circuits, effectively eliminating the likelihood of incorrect operation and voltage drop.

Raceways provide the ease of upgrading conductors efficiently and give electricians the freedom to pull conductors through a building. Therefore, let spare raceways and safety electrical material is installed during construction to allow an easy installation of conductors in the future.

As appliances and equipment advance over time, the lighting and switching mechanisms in your house or building should anticipate future modifications. For example, motion detectors and other electronic lighting devices require a small standby current to remain in their optimal state.

Therefore, install the following solutions for safety switches and lighting appliances right from building construction.

These applications are necessary if you want to reduce the load on the circuits in your house. If you have not implemented them yet, call a reputable electrician today to overhaul the electrical conduits. While this protects the electrical wiring from possible hazards, it also safeguards the assets in your house or building.

There are some home repairs you don’t want to tackle. Here are several red flags to look for when you’re buying a home.

common plumbing problems. Water damage is the homeowner’s mortal enemy. Water causes foundation problems, rot and mold. Want to move into that mess? Probably not.

To see if your potential purchase has suffered the consequences of water damage, start outside and

When you see water damage near an electrical outlet or a light fixture, you may have stumbled onto a fire risk. But outlets aren’t the only place to look for potential electrical problems.

Look for flickering and blinking, which signals a poor connection somewhere along the circuit. Check to see if both halves of electrical outlets are functioning. Make sure bathrooms, kitchens, garages and outdoors have professional electrician should determine whether the home’s circuits or fuses provide adequate power and service. The electrician can look for burned wiring, improper connections, dead-end wiring or ungrounded switches and outlets.

Your home inspector is a font of knowledge! Have the inspector check the air quality of the home to see if any mold spores are present — if water leakage or other common plumbing problems have been an issue, mold may be, too.

The inspector can ensure that the heating and cooling systems are properly installed. The inspector can also determine how old the HVAC system is and ensure that its been maintained

Your inspector will also determine the type of pipe that supplies water to the house—old lead and galvanized steel pipes are going to need replacing.

If the house you’re considering fails these tests, it may be best to move onto the next. If you still think it’s the right house for you, despite the presence of common plumbing problems or the need for an electrical overhaul, negotiate a lower price or ask the seller to pay for needed fixes.

Questions? Thoughts? Leave a note in the Comments section orschedule service today.

It’s incredible the way lighting can change outdoor spaces. As is the case with indoor spaces, spending comparatively little on lighting can produce dramatic results. A DIY outdoor lighting project might be just the thing to make you fall in love with your home all over again. But before you begin an outdoor lighting project, it’s important to think about your options. Here are 10 tips for 10 approaches to outdoor lighting.

1. Using Outdoor String Lights

Outdoor string lights are just great. But there are so many different kinds! Some have bare bulbs; some have lanterns. Some are LED; some incandescent. Some are white; some are colored. Make sure you research your options and choose the ones that are right for YOU!

2. Taking DIY Outdoor Lighting to the Next Level

Sure, you can install a standard low voltage lighting fixture and be justified when you say you Did It Yourself, but have you ever considered making your own DIY outdoor lighting fixtures? Mason jars seem to be the ingredient of choice when constructing your own outdoor lights. The internet is full of instructions for making DIY outdoor lighting fixtures, so do your homework and find the perfect project to make your outdoor area more luminous.

3 . Making it Modern

Let’s get weird! Isn’t that what modern outdoor lighting seems to say? I guess it depends on whom you ask. Modern outdoor lighting usually consists of interesting light fixtures with unusual, playful designs, and they can really make your outdoor vibe more interesting and thought-provoking.

4. Showing Off Textures

Sometimes you start with a particular light source in mind. These days, that light source is often LED. If you’re sure you want to use outdoor LED lights, you have a wide variety of outdoor LED light fixture types, from LED rope to LED tape to LED path lights, step lights, puck lights, recessed lights, and string lights. LED outdoor lights are highly efficient and look great. And some, like the one above, run on solar power! That means free!

8. Decking Out the Deck

If you are focused specifically on outdoor deck lighting, make sure you think about caution. Outdoor deck lighting should entail step lights if there are steps and should include lights around the perimeter of the deck. LED tape or rope, colored or white, are often great for running on the underside of deck railings.

9. Using Timers

One of the most affordable and effective components of any home security system is motion detecting outdoor lighting. Installed by a professional electrician, these lights can give you years of reliable service and peace of mind.

But like any part of your household electrical system, problems can arise from time to time. If your outdoor security lights are staying on all the time, not coming on at all or otherwise performing poorly, you can try these simple DIY fixes before calling an electrician.

Most motion detecting light fixtures allow the motion detector to be aimed at a specific area. If your lights are coming on too often, it could be that the sensor is aimed at a nearby street or an area where wildlife roam around at night. If the lights aren't coming on at all, the sensor might be aimed directly at the ground or into the side of the house. Experiment with different sensor positions after dark and walk around in the areas you want to secure to fine-tune your aim.

Motion detectors also typically come equipped with sensitivity settings. Too sensitive, and something as small as a fly could set it off. Not sensitive enough, and a prowler could come within a few feet of the fixture before it lights up. Locate this setting and fine-tune it to your liking.

Another common setting for motion detector lights is a light duration time. This can be as long as 30 minutes, and if your lights are unwittingly set this way, it could give the impression that they stay on all night. A good duration for most security light applications is one to two minutes.

A dirty sensor can’t detect movement properly. If dirt and dust have accumulated on your motion detector, use a wet rag to wipe it clean, then re-test your lights.

Security lights can get off-kilter if there are interruptions in the electrical supply, such as power outages, power surges and accidentally flipping light switches or breakers. Sometimes this can result in lights that stay on or off all the time. To reset most motion detecting lights, shut off the power supply at the switch for at least 30 seconds, making sure there’s no motion in front of the sensor during this time. Then turn the light back on and test it to ensure proper function. If there was motion in front of the sensor while the power was off, this may need to be repeated.

Not all motion detector problems can be fixed this easily. If you have persistent problems, storm damage or faulty installation, it’s important to call in your local licensed electricians for a professional evaluation and repair.

If you’re searching for a way to control your lighting from anywhere and without flipping a switch, Wi-Fi LED lights are the perfect products. With a Wi-Fi LED Controller Hub, you can control compatible LED bulbs, LED flood lights, and LED strip lights with your Android or iOS-enabled smartphone or tablet. The Milight 3.0 app, along with a Wi-Fi compatible controller when necessary—allows you to power lights on and off, control multiple zones of lights, select from thousands of colors, choose from various single-color and color changing modes, and control brightness and speed.

Wi-Fi compatible flood lights are great for landscape lighting, tree uplighting, architectural wall washing, and other outdoor applications. These LED landscape lights are available in 30- and 50-watt versions and have separate LEDs for either white or colorful illumination. They plug into a standard 3-prong outlet and can be easily connected to a Wi-Fi hub. Connect multiple lights to the hub, and synchronize their color, brightness, or mode with your smartphone or tablet.