Most people have air conditioning in their homes and though the temperatures don’t really drop too much even during winter here, there are definitely days on which there is a nip in the air, and if you have tiled flooring, it’s bound to get uncomfortably cold. While heating systems do help solve this problem, many homeowners are now transitioning to radiant heat. This provides very pleasant warmth to your body and feet as it warms the surface of the floor.

These under floor heating systems are suitable for hard floor surfaces such as living rooms, kitchens, entertaining areas, bathrooms etc. Since the air circulation is very gentle, there is a marked reduction in the amount of dust particles that get circulated, it’s a great relief for people that suffer from asthma and allergies.

When you are planning on getting this system installed, it’s important that you hire the services of a well-established and credible company; they will understand what your specific requirements are and then provide you the kind of solutions you need.

This type of heating uses heating cables that are well-embedded in the flooring concrete slab and it provides the right amount of heating. It essentially stores the heat during the night and then slowly releases it during the day and provides continuous warmth.

As you can see, there are a number of other advantages to getting underfloor heating systems installed. For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of power factor installation solutions. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

One of the main stays in Industrial and Commercial Lighting has been the Metal Halide Bulb. It is common in Indoor Fixtures, such as High Bays, Canopy Lights, Garage Lights and Low Bays. It is

So you have a Metal Halide (or even High Pressure Sodium) light, and you want to convert to LED. You’ve done your research, you’ve been inundated with marketing materials that tell you what is the most important thing to consider (coincidentally it probably is something they think is important). And now you are left to make a decision. New or retrofit? What new versus retrofit. We sell both. Our retrofits perform as well if not better than new fixtures, but not all retrofit kits can make that claim. However, if your fixtures are old, leak, and have seen their better days, then by all means replace them. It does not make sense to buy a new fixture that includes a retrofit kit inside of it like some vendors will try and sell you. The engineering of some of the new fixtures are fantastic. However, the real reason you would want to consider retrofitting is because you have a significant investment in fixtures. Why not keep that investment? Retrofitting is extremely cost effective, especially our Look for the DLC Premium Symbol, it’s different than the DLC Standard symbol. And that gives you the quick notification that the light you are looking at is the most efficient.

And why does that matter. It’s simple. It will save you a lot more money. Let me do three comparisons for you. First a retrofit kit designed at 97 lumens per watt to replace a 400W Metal Halide bulb, a second at 102 lumens per watt and ours at 155 lumens per watt. Lets keep everything else the same. Cost of electricity, hours of use. The only thing different you will notice is the watts consumed and the lumens produced. For the record, our retrofit kit uses the least amount of energy in this test BUT also produces the most amount of light. We will use 12 hours a day operating time and .12 kw.h electricity cost

Calculation 1: 97 lumens per watt retrofit head, 135 watts, 13164 lumens

Savings per fixture per year over 400 watt Metal Halide: $170.82

Calculation 2: 102 lumens per watt retrofit head, 143 watts, 14600 lumens

Savings per fixture per year over 400 watt Metal Halide: $166.62

OK, so between the competitor options, you are neck and neck, the difference is so minimal you can make your decision based on whose website you like more

Calculation 3: 155 lumens per watt retrofit head, 100 watts, 15,776 lumens (this is our LED Retrofit Kit)

Savings per fixture per year over 400 watt Metal Halide: $189.22

So there is clearly a $18.40 savings over the first LED retrofit option and a $22.60 savings per fixture over the second LED Retrofit option. And, we produce more light!

We have 3 mini LED Retrofit Kits, 30W, 45W and 60W designed to replace up to 250W Metal Halide. We have 3 standard sized retrofit kits, 75W, 100W and 120W designed to replace from 250 Watt to 400 Watt Metal Halide. We have 2 Large Retrofit Kits, 150W and 200W, designed to provide more light than a 400W Metal Halide up to 750W Metal Halide. And we have 3 Extra Large retrofit kits, 280W, 320W and 350W, designed to replace 1000W Metal Halide.

In recent years, homeowners throughout the country have becoming increasingly reliant on appliances and electronic devices. Many don’t realize this, but that means that the electrical demands we are placing on our homes are much higher than they used to be, and our homes may not be well-equipped to handle it.

You may use small, portable surge protectors or power strips in your home to plug in things like your TV, or computer equipment. However, this is typically not sufficient enough to really protect your home and electronics against the dangers of power surges. Fortunately, there is a solution—whole-house surge protection.

As we mentioned above, you may utilize power strips to plug electronics such as your laptop or entertainment equipment into. This isn’t necessarily a bad idea, as it does serve a purpose. However, the more demand you place on these, the higher risk there is for your electronic equipment.

Whole-house surge protection helps guard your electronics and appliances against a large power surge. Remember, a power surge can do more than just cause your lighting to go out or kill the battery in your laptop. It can damage your HVAC system and any other large appliance that’s hooked up to your home’s electrical system. Systems do not even have to be operating or turned on at the time for a power surge to damage them.

If you want full protection for your home and electrical system, then you need the right type of surge protector. No matter what type you choose, it’s important to have it professionally installed to ensure that it works properly and really does protect your electrical system when needed.

Electrical jobs should never be turned into a DIY project, unless you have formal training and experience in the field. While electricity is extremely useful and necessary, if it isn’t handled correctly, it can be pretty dangerous too. If you get a novice to handle the job for you that can result in overloaded circuits, poor wiring connections or even faulty grounding, which can be extremely dangerous to you and your family and result in a fire outbreak as well. Here are some common services for which you would need to call in an electrician:

The main electrical panels provide electricity to your entire house. If you have older panels with fuses and older wiring, those may not be able to bear the load of any new appliances you decide to install on your property. The latest electrical appliances tend to add heavy loads on the system and your older wiring installations won’t be able to support those loads. If you are getting new appliances, call in a licensed electrician to test and inspect the wiring and circuit breakers on your property.

If you need any new outlets installed or need existing ones converted to USB ports, you would have to call in an electrician for the job. Oftentimes, electrical codes necessitate that a minimum of 1 outlet in your kitchen and bathroom be a GFCI outlet. These are specifically designed to shut off the power in case there is an imbalance in electricity or if water comes in contact with any of the electrical equipment or fittings; this helps in preventing shock in these areas.

It’s important that there be certified and licensed electrician should handle. They will take all the necessary precautions while doing any kind of electrical work on your property.

Are you dealing with frequently flickering lights? Do your circuit breakers trip often when you turn on large appliances? Does your home have several two-pronged outlets that do not accommodate today’s three-pronged plugs for most electrical appliances? If you answered yes to any of these questions, your home more than likely needs a heavy up, which is an increase in the power of your main electrical service. For example, we can transition your home from lower amperage to either 200 or 400 amps.

Homes without Ground Fault Interrupter (GFI) outlets in the bathrooms, kitchens, or garages also need to be upgraded. This is a type of outlet that protects against electrical shocks. GFI outlets are required in most states, and homeowners in MD, VA, and DC should change all older version outlets to GFI outlets. A GFI outlet has two buttons, including a test button and a reset button, and the outlets turns the power off before a shock can occur. It is especially important that GFI outlets are installed in any area of your home where water flows—bathrooms, kitchens, outdoor areas. The outlet will sense when there is a potentially dangerous imbalance in the flow of electricity from the outlet to whatever is plugged and will shut off to prevent shocks or electrocution.

Many older homes in the area were constructed with aluminum wiring. When these homes were built, aluminum wiring was considered safe to use and viewed as a cost-saving measure. The U.S. Consumer Product Safety Commission (CPSC) now believes aluminum wiring poses a safety hazard in homes that still have this type of wiring.

The biggest danger associated with aluminum wiring is that unanticipated fire hazards arise from the rusting and deterioration caused at the points where aluminum wiring is connected at outlets, light fixtures, and splices. Call us so an expert electrician can evaluate whether or not this is a problem in your home and take steps to transition your home from aluminum to copper wiring.

If you live in an older MD, VA, or DC home, contact Kolb Electric today. We strongly recommend that you avoid attempting any electrical upgrades or repairs on your own as this can be very dangerous. Electrical upgrades are best left to a professional, licensed electrician.